ملخص المحتوى في الصفحة رقم 1
User Manual
ملخص المحتوى في الصفحة رقم 2
Edition Notes The Q-Spot™ 560-LED User Manual Rev. 08 covers the description, safety Edition Notes precautions, installation, programming, operation, and maintenance of the Q-Spot™ 560-LED. CHAUVET® released this edition of the Q-Spot™ 560-LED User Manual in January 2013. Trademarks CHAUVET® is a registered trademark of CHAUVET & Sons Inc. (d/b/a CHAUVET® or Chauvet). The CHAUVET® logo in its entirety including the CHAUVET name and the dotted triangle, and all other trademarks
ملخص المحتوى في الصفحة رقم 3
Table of Contents Table of Contents 1. Before You Begin ............................................................................................... 1 What Is Included ................................................................................................................. 1 Unpacking Instructions ........................................................................................................ 1 Claims .....................................................................
ملخص المحتوى في الصفحة رقم 4
Table of Contents 5. Technical Information ...................................................................................... 24 Product Maintenance ........................................................................................................ 24 Troubleshooting Guide ...................................................................................................... 25 Returns Procedure .......................................................................................
ملخص المحتوى في الصفحة رقم 5
Before You Begin 1. Before You Begin · One Q-Spot™ 560-LED What Is · One IEC Power Cord with Edison Plug (US Market) Included · Two Omega Brackets · One Safety Cable · Warranty Card · Quick Reference Guide Immediately upon receiving this product, carefully unpack and check the container. Make Unpacking sure you have received all the parts indicated above and all the parts are in good condition. Instructions Claims If the container or the material inside the conta
ملخص المحتوى في الصفحة رقم 6
Before You Begin Icon Meaning Icon Meaning This icon indicates critical installation, configuration, or operation information. Failure to comply with this information may render the product partially or completely inoperative, damage third-party equipment, or cause harm to you. This icon indicates important installation or configuration information. Failure to comply with this information may prevent the product from functioning correctly. This icon indicates useful, although n
ملخص المحتوى في الصفحة رقم 7
Before You Begin Read all these Safety Notes before starting to work with this product. These notes include Safety Notes important safety information about the installation, usage, and maintenance of this product. There are no user serviceable parts in this product. Any reference to servicing you find in this User Manual only applies to properly CHAUVET® certified technicians. Do not open the housing or attempt any repairs unless you are one of them. Please refer to all ap
ملخص المحتوى في الصفحة رقم 8
Introduction 2. Introduction The Q-Spot™ 560-LED is a high-power moving yoke product equipped with three (3) 60- Product watt white LEDs. This product includes a color wheel with seven slots, plus white, and two Description gobo wheels. One gobo wheel has seven fixed gobos, plus open. The other gobo wheel has six rotating slot-n-lock gobos, plus open. In addition, the Q-Spot™ 560-LED includes remote focus and a rotating 3-facet prism. · 13 or 17-channel DMX-512 LED moving yoke
ملخص المحتوى في الصفحة رقم 9
Introduction Product Overview DMX In P ower Switch Rear View DMX Out Control Panel Front View Q-Spot™ 560-LED User Manual Rev. 08 -5-
ملخص المحتوى في الصفحة رقم 10
Introduction Color Wheel Gobo Wheel 1 Gobo Wheel 2 -6- Q-Spot™ 560-LED User Manual Rev. 08
ملخص المحتوى في الصفحة رقم 11
Introduction Product Dimensions Q-Spot™ 560-LED User Manual Rev. 08 -7-
ملخص المحتوى في الصفحة رقم 12
Setup 3. Setup The Q-Spot™ 560-LED has an auto-ranging power supply that works with an input voltage AC Power range of 100~240 VAC, 50/60 Hz. Make sure that you are connecting this product to the proper voltage, as per the specifications in this manual or on the product’s sticker. Always connect this product to a protected circuit with an appropriate electrical ground to avoid the risk of electrocution or fire. To determine the power requirements for the Q-Spot™ 5
ملخص المحتوى في الصفحة رقم 13
Setup You may link the Q-Spot™ 560-LED to a DMX controller using a standard DMX serial DMX Linking connection. If using other DMX compatible products with the Q-Spot™ 560-LED, you can control each product individually with a single DMX controller. DMX Modes The Q-Spot™ 560-LED uses the standard DMX data connection for its DMX personalities, Basic and Advanced. You will find information about these DMX modes in this manual. Refer to the Introduction chapter for a brief descr
ملخص المحتوى في الصفحة رقم 14
Setup 1. Turn the product off and disconnect from the power outlet. Gobo 2. Open the head cover by loosening the four fastening screws at the sides of the Replacement top cover. 3. Separate the gobo plate from the gobo wheel by pushing the gobo plate toward the front of the moving head (direction 1 in the diagram). Be careful not to push the gobo out of the gobo plate. 4. Take out the gobo plate by pulling the gobo plate outward (direction 2 in the diagram). 5. On a flat surface,
ملخص المحتوى في الصفحة رقم 15
Setup Before mounting this product, read and follow the Safety Notes in the Before You Begin Mounting chapter of this manual. Orientation Always mount this product in any safe position while making sure that there is adequate room for ventilation, configuration, and maintenance. Rigging CHAUVET® recommends following the general guidelines below when mounting this product. · When selecting an installation location, consider easy access to this product for operat
ملخص المحتوى في الصفحة رقم 16
Operation 4. Operation Button Function Control Panel