ملخص المحتوى في الصفحة رقم 1
®
Model No. 831.105070
Serial No.
USER’S MANUAL
Write the serial number in the
space above for reference. The
serial number decal is on the
frame behind the access cover.
QUESTIONS?
As a manufacturer, we are com-
mitted to providing complete
customer satisfaction. If you
have questions, or if there are
missing parts, we will guarantee
complete satisfaction through
direct assistance from our facto-
ry.
If you require SERVICE for this
product, please call SEARS
1-800-4MYHOME (469-4663), or
SEARS
ملخص المحتوى في الصفحة رقم 2
TABLE OF CONTENTS IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 CHOOSING A LOCATION FOR THE HYDROTHERAPY SPA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 SET-UP AND ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . .
ملخص المحتوى في الصفحة رقم 3
IMPORTANT SAFETY INSTRUCTIONS WARNING: TO REDUCE THE RISK OF DROWNING, ELECTRIC SHOCK, OR SERIOUS INJURY, READ THE FOLLOWING IMPORTANT PRECAUTIONS BEFORE USING THE RENEW 515. READ AND FOLLOW ALL INSTRUCTIONS 1. It is the responsibility of the owner to ensure py spa that could damage the spa shell. that all users of the hydrotherapy spa are adequately informed of all precautions. 10. Never insert any object into any opening. 2. Use the hydrotherapy spa only as described 11. Do not use breakable c
ملخص المحتوى في الصفحة رقم 4
20. Keep all electrical appliances such as radios, 26. WARNING—To reduce the risk of injury: telephones, televisions and lights at least Always use an accurate thermometer to five feet (1.5 m) away from the water. determine the water temperature before using the hydrotherapy spa. 21. DANGER—Risk of electric shock: Do not set up the hydrotherapy spa within five feet (1.5 27 WARNING—To reduce the risk of injury: m) of any metal objects or surfaces. As an Pregnant women should consult with their al
ملخص المحتوى في الصفحة رقم 5
lems, or diabetes to consult their physician before using this product. 34. WARNING—The included warning sign must be posted where all users of the spa can see and read it (see POSTING THE WARNING SIGN on page 13). 35. CAUTION—The hydrotherapy spa is not designed for in-ground installation. Do not install the hydrotherapy spa in-ground. 36. Disconnect the electric power supply before servicing the spa. 37. If you feel pain or dizziness at any time while using the hydrotherapy spa, discontinue u
ملخص المحتوى في الصفحة رقم 6
BEFORE YOU BEGIN ® Thank you for selecting the innovative IMAGE Renew For your safety and benefit, read this manual care- 515 hydrotherapy spa. The RENEW 515 offers the fully before using the RENEW 515. If you have addi- features and quality of a traditional hot tub at an tional questions, please call our Customer Service affordable price. And best of all, the RENEW 515 lets Department at SEARS 1-800-4MYHOME (469-4663), you enjoy the benefits of hydrotherapy in the comfort or SEARS 1-877-LEFOYE
ملخص المحتوى في الصفحة رقم 7
CHOOSING A LOCATION FOR THE HYDROTHERAPY SPA There are many factors to consider when choosing a location to set up the hydrotherapy spa. These factors vary depending on whether you use the hydrotherapy spa inside or outside. We have listed several factors you may wish to consider as you decide where you want to use the hydrotherapy spa. If you set up the hydrotherapy spa inside: If you set up the hydrotherapy spa outside: 1. The hydrotherapy spa will increase the level of 1. Check your local bu
ملخص المحتوى في الصفحة رقم 8
SET-UP AND ASSEMBLY Before beginning assembly, carefully read the • Read each assembly step before you begin. following information and instructions: • Tighten all parts as you assemble them, unless • Place all parts in a cleared area and remove the instructed to do otherwise. packing materials from the spa shell; do not dis- pose of the packing materials until assembly is ASSEMBLY REQUIRES THE FOLLOWING completed and the spa is in operation. TOOLS (NOT INCLUDED): • Assembly requires two peopl
ملخص المحتوى في الصفحة رقم 9
3. The hydrotherapy spa is designed to operate with either a 120 volt or a 240 volt power source. For your con- venience, it comes factory wired to accept a 120 volt power source. The spa must be wired by a licensed, qualified electrician directly to an approved Ground Fault Circuit Interrupter (GFCI) in compliance with all local, state, and national electrical codes. Before you have the spa wired, be sure that it is in the position you want, and that it can easily be serviced, if needed. For in
ملخص المحتوى في الصفحة رقم 10
POSTING THE WARNING SIGN The included warning sign, shown below, must be posted on a wall or fence where it will be visible to all users of the RENEW 515. Whenever the spa is moved, the sign must also be moved and reposted near the spa. If the sign becomes lost or illegible, call our toll-free Customer Hot Line at SEARS 1-800-4MYHOME (469-4663), or SEARS 1-877-LEFOYER (533-6937) 24 hours a day to obtain a free replacement sign. Post the sign as described above. 10
ملخص المحتوى في الصفحة رقم 11
USING THE HYDROTHERAPY SPA The hydrotherapy spa is designed to seat five adults. of the “Bromine Base” bottle, and 1/3 of the “Non- The fifteen thera-jets can be regulated to provide a chlorine Shox” bottle to the water. Allow the water to relaxing massage to sooth away stress, and the circulate for five minutes. You should now test the pH strength of the water massage can be adjusted by the of the water using the included pH test kit. The pH air control. The hydrotherapy spa holds 200 gallons r
ملخص المحتوى في الصفحة رقم 12
SPA SHELL DIAGRAM H G A E A B C F B A D B B A D A A SPA OPERATION The suction vents (D) near the floor of the spa bring water into the pump in order to operate the system. Refer to the diagram above. The function of each The suction covers should always be in place over component is explained below. the suction vents. Never operate the spa without the suction covers in place. The eight fixed thera-jets (A) are located on the sides of the spa. Five jets focus a water massage on The filter (E) can
ملخص المحتوى في الصفحة رقم 13
CONSOLE DIAGRAM Temperature Display USING THE CONSOLE the button will light. To turn the pump on high, press the button once. The thera-jets will operate at full Refer to the console diagram above. The function of speed. To turn the pump on low, press the button each console control is explained below: again. The thera-jets will operate at low speed. After you press the button a third time, the thera-jets will Temperature Display: During normal use, this dis- shut off, unless it is time for the
ملخص المحتوى في الصفحة رقم 14
ADJUSTING THE FILTER CYCLE SECURING THE SPA COVER The spa filter cycle runs automatically to clean the To secure the spa, snap the latches on the spa cover water in the spa. However, the number of times that into the buckles on the side panels. the filter cycle needs to run depends on how often the spa is used. If the spa is used regularly by several To lock the buckles, people, the water will need to be filtered more often insert the key and turn Latch than if it is used only occasionally by a
ملخص المحتوى في الصفحة رقم 15
MAINTENANCE The hydrotherapy spa is designed to provide you with CLEANING THE SPA SHELL years of enjoyment. Please follow the guidelines below to properly maintain the spa. The spa shell should be cleaned with a mild soap solution. Do not use solvents. The spa should always MAINTENANCE SCHEDULE be clean and dry before being moved or stored. DAILY MAINTAINING THE SPA COVER • Check the water level and refill the spa to the level shown in step 3 on page 9. The entire spa cover should be cleaned mon
ملخص المحتوى في الصفحة رقم 16
WATER CHEMISTRY ATTACHING AND REMOVING THE ACCESS COVER The hydrotherapy spa comes with a starter chemical To remove the access cover, insert fingers into the fin- pack for maintaining the water in the spa. (See TEST- ger holes and pull it away from the spa. Be careful ING AND TREATING THE WATER on page 11.) not to damage the spa shell as you remove the Additional chemicals can be purchased at a pool and cover. spa supply store. CAUTION: The chemicals used to maintain the pH Spa Spa balance of
ملخص المحتوى في الصفحة رقم 17
To drain the hydrotherapy spa, follow these steps: 1. Set the water temperature to the lowest setting. 2. Shut off the circuit breaker or GFCI. 3. Remove the access cover from the spa. Cut-off 4. Remove the drain hose from the clip and attach a Valve garden hose to the valve on the drain hose. Cut-off Valve Knob Cap Drain Hose Valve If you are planning to work on the pump or motor, you will also need to drain the pump (see this page). 5. Open the valve by turning the knob counterclock- wise. The
ملخص المحتوى في الصفحة رقم 18
CONVERTING THE SPA TO A 240 VOLT Removing and Cleaning the Filter Cartridges: POWER SOURCE 1. Follow steps 1 through 4 at the left to remove the basket. The hydrotherapy spa is designed to operate with 2. Reach into the housing and locate the plastic either a 120v power source or a 240v power source. diverter on top of the filter cartridges. Rotate the For your convenience, the spa is shipped ready to valve on the diverter until it is fully open. accept a 120v power source. However, you can grea
ملخص المحتوى في الصفحة رقم 19
MAINTENANCE NOTES Maintenance is an important part of keeping your spa in top operating condition. Use the space below to make any notes you may want to remember for future reference or to keep a maintenance log. 19
ملخص المحتوى في الصفحة رقم 20
- TROUBLE SHOOTING Most problems can be solved by following the simple steps below. Find the symptom that applies and follow the steps listed. If further assistance is needed, call our Customer Service Department at SEARS 1-800-4MYHOME (469-4663), or SEARS 1-877-LEFOYER (533-6937) 24 hours a day 1. SYMPTOM: THE SPA WILL NOT OPERATE 6. SYMPTOM: THE WATER DOES NOT HEAT a. Check to see if the GFCI breaker is tripped or a. Make sure that the hydrotherapy spa is fully was not turned on. Reset the G
