American Standard Acrylux Builder Series Bathtubs 6032Y1.102.XXX دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

INSTALLATION INSTRUCTIONS
Acrylux Builder Series Bathtubs
Model 6030Y1.102.XXX Model 6032Y1.102.XXX
Model 6030Y1.202.XXX Model 6032Y1.202.XXX
Thank you for selecting American Standard – the benchmark of fine quality for over 100 years. To ensure this product
is installed properly, please read these instructions carefully before you begin. Local building codes vary by location.
Observe all local plumbing and building codes.
RECOMMENDED TOOLS AND MATERIALS
Tape Measure Saber Saw Pencil Mort

ملخص المحتوى في الصفحة رقم 2

INSTALLATION INSTRUCTIONS STEP 1. PREPARING ALCOVE • Strip to bare studs. • Alcove studs should be constructed as shown above. • Floor must be clean, smooth, and level (check with level). Sub floor must be installed. Do not install tub on open floor joists. • Cut hole in sub floor as shown on page 1 to accommodate drain. FIGURE 1. Check to assure tub is level. STEP 2. INSTALLING TUB • Trial fit tub in prepared alcove. With tub sitting flat on floor, check with level on top of tub. Tub sho

ملخص المحتوى في الصفحة رقم 3

SCRATCH REMOVAL INSTRUCTIONS 1. For effective scratch removal and polishing, you will need to purchase these items: ® 1 sheet 1000 grit 3M wet-dry sandpaper ® 1 sheet 1500 grit 3M wet-dry sandpaper SUPERFICIAL ® 1 sheet 2000 grit 3M wet-dry sandpaper SCRATCH ® 1 small container of 3M rubbing compound #05933 2000 grit These items can be purchased at most auto supply stores that provide supplies to professional paint and body shops. Call before you go. Not all auto supply stores will have