Skuttle Indoor Air Quality Products 592-9 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

Part No. 000-0756-233
Rev. 8/03 HBP


®
Skuttle Model 592-9


24-Volt Spray Humidifier


for Heat Pumps and

High-Efficiency Furnaces
101 Margaret Street, Marietta, OH 45750
Phone: (800) 848-9786 • Fax: (740) 373-9565
Email: techservice@skuttle.com • Web: www.skuttle.com
INSTALLATION INSTRUCTIONS
BEGIN READING ON OPPOSITE PANEL
IMPORTANT:
INSTALLING THE HUMIDIFIER:
THIS HUMIDIFIER MUST BE INSTALLED BY A QUALIFIED CONTRACTOR.
3.0 CAUTION: When selecting a locatio

ملخص المحتوى في الصفحة رقم 2

PLUMBING THE HUMIDIFIER: 5.0 Select the nearest cold water pipe and install the saddle connector and needle valve, supplied with this unit. Use copper tubing only. The needle valve is a self-piercing valve when installed on copper pipe. Follow the instructions supplied with the valve. Mount the valve so that water will come from the top or side. This will reduce the chance of minerals clogging the valve. 5.1 Follow these compression plumbing tips: Lightly clean the tubing e