ملخص المحتوى في الصفحة رقم 1
USER’S MANUAL
FX20 MOTORIZED TREADMILL
MODEL NUMBER: FX20
USER WEIGHT LIMITATION: 265lbs.
TOLL FREE CUSTOMER SERVICE NUMBER: 1.888.800.1167
SERIAL NUMBER (found on frame):
ملخص المحتوى في الصفحة رقم 2
2 FX20 MOTORIZED TREADMILL PRECAUTIONS Precautions: WARNING: To reduce the risk of burns, fire, electric shock, or injury to persons, read the following important precautions and information before operating the treadmill. It is the responsibility of the owner to ensure that all users of this treadmill are adequately informed of all warnings and precautions. • Use the treadmill only as described in this manual. • Place on a level surface, with 2 meters (6 feet) of clearance
ملخص المحتوى في الصفحة رقم 3
3 FX20 MOTORIZED TREADMILL POWER REQUIREMENTS Power Requirements: IMPROPER CONNECTION OF THE EQUIPMENT GROUNDING CONNECTOR CAN RESULT IN A RISK OF AN ELECTRIC SHOCK. CHECK WITH A QUALIFIED ELECTRICIAN OR SERVICE MAN IF YOU ARE IN DOUBT AS TO WHETHER THE PRODUCT IS PROPERLY GROUNDED. DO NOT MODIFY THE PLUG PROVIDED WITH THE PRODUCT, IF IT WILL NOT FIT THE OUTLET; HAVE A PROPER OUTLET INSTALLED BY A QUALIFIED ELECTRICIAN. This treadmill can be seriously damaged by sudden volt
ملخص المحتوى في الصفحة رقم 4
4 FX20 MOTORIZED TREADMILL PREASSEMBLY Open the boxes: You are now ready to open the boxes of your new equipment. Make sure to inventory all of the parts that are included in the boxes. Check the Hardware Comparison Chart for a full count of the number of parts included for this product to be assembled properly. If you are missing any parts or have any assembly questions call the manufacturer. Gather your tools: Before starting the assembly of your unit, make sure that yo
ملخص المحتوى في الصفحة رقم 5
5 FX20 MOTORIZED TREADMILL HARDWARE COMPARISON CHART Hardware chart: For your convenience, we have identified the hardware used in the assembly of this product. This chart is provided to help you identify those items that may be unfamiliar to you. 100 NO. DESCRIPTION QTY. 88 76 77 70 M4 x 15mm Screw 19 76 M6 X 15mm Screw 2 77 M8 x 18mm Allen Bolt 2 78 70 78 M8 x 50mm Allen Bolt 2 88 Washer 4 A C 100 M8 x 30mm Screw 2 A Allen Key Tool 1 B B Screw Driver Tool 1 C Allen
ملخص المحتوى في الصفحة رقم 6
6 FX20 MOTORIZED TREADMILL PARTS LIST NO. DESCRIPTION QTY. ORDER NO. NO. DESCRIPTION QTY. ORDER NO. Computer Insert 1 Fold Up Support Bushing 2 1 20-01 28 20-28 Console Housing - 1 Fold Up Support Insert 1 Upper 2 20-02 29 20-29 Console Housing - 1 Nut 1 Bottom 3 20-03 30 20-30 Safety Key 1 Spacer 1 4 20-04 31 20-31 EKG Pulse Sensor 2 Foot Up Locker 1 5 20-05 32 20-32 Base Frame Rubber Front Handlebar 1 2 Cushion - Rear 6 20-06 33 20-33 Handlebar Cover - 1 T
ملخص المحتوى في الصفحة رقم 7
7 FX20 MOTORIZED TREADMILL PARTS LIST NO. DESCRIPTION QTY. ORDER NO. NO. DESCRIPTION QTY. ORDER NO. Elevation Support 2 M10 x 68mm Allen Bolt 1 Frame End Cap #1 55 20-55 82 20-82 Plastic Clamp - 2 Pivot Shaft 1 Upper 56 20-56 83 20-83 Plastic Clamp - 2 Deck Wheel Bolt 2 Bottom 57 20-57 84 20-84 Bracket 2 Fold Up Stopper 1 58 20-58 85 20-85 Elevation Support Elevation Support Frame 2 2 Frame End Cap #2 Fixing Bolt 59 20-59 86 20-86 Deck Frame 1 6mm Washer 3 60
ملخص المحتوى في الصفحة رقم 8
8 FX20 MOTORIZED TREADMILL PARTS DIAGRAM A MAJORITY OF THE PARTS SHOWN HERE HAVE BEEN PREASSEMBLED AT THE FACTORY. Visit us at: www.evofitness.com
ملخص المحتوى في الصفحة رقم 9
9 FX20 MOTORIZED TREADMILL PARTS DIAGRAM A MAJORITY OF THE PARTS SHOWN HERE HAVE BEEN PREASSEMBLED AT THE FACTORY. Visit us at: www.evofitness.com
ملخص المحتوى في الصفحة رقم 10
10 FX20 MOTORIZED TREADMILL ASSEMBLY STEP 1: Remove your treadmill from the carton and place it on the floor in an open area as shown in FIG 1. Raise the Right and Left Uprights (16 and 15) and secure with two Washers (88) and M10 x 58mm Bolts (78). FIG. 1 Visit us at: www.evofitness.com
ملخص المحتوى في الصفحة رقم 11
11 FX20 MOTORIZED TREADMILL ASSEMBLY STEP 2: Rotate up the Handlebar (97) down as shown in FIG 2. Secure the Handlebar (97) in place using two M8 x 18 Allen Bolt (77) from underneath. Finally, fully tighten the two M8 x 18 Allen Bolt (77) at the pivot points as shown in FIG 3. Visit us at: www.evofitness.com
ملخص المحتوى في الصفحة رقم 12
12 FX20 MOTORIZED TREADMILL ASSEMBLY STEP 3: Secure the Console Housing – Bottom (3) to the Console Plate (35) using two Screws M6 x 15 Screw (76). Visit us at: www.evofitness.com
ملخص المحتوى في الصفحة رقم 13
13 FX20 MOTORIZED TREADMILL ASSEMBLY STEP 4: Slide the Handlebar Cover – Left #2 (8) and Handlebar Cover – Right #2 (9) onto the Front Handlebar (6). Connect each of the EKG Pulse Wire (13) to each of the EKG Pulse Sensor (5). Secure the Front handlebar (6) to the Handlebar (97) using two M8 x 30mm Screw (100). Visit us at: www.evofitness.com
ملخص المحتوى في الصفحة رقم 14
14 FX20 MOTORIZED TREADMILL ASSEMBLY STEP 5: Attach the Handlebar Cover – Left #1 (7) to the Handlebar Cover – Left #2 (8) and Left Upright (15) using six M4 x 15mm Screws (70). Attach the Handlebar Cover – Right #1 (10) to the Handlebar Cover – Right #2 (9) and Right Upright (16) using six M4 x 15mm Screws (70). Visit us at: www.evofitness.com
ملخص المحتوى في الصفحة رقم 15
15 FX20 MOTORIZED TREADMILL ASSEMBLY STEP 6: Attach the Upright Base Cover – Left #2 (18) and Upright Base Cover – Left #1 (17) over the Left Upright (15). Secure using three Plastic Fixing Insert (72) and three M4 x 15mm Screw (70). Attach the Upright Base Cover – Right #2 (19) and Upright Base Cover – Right #1 (20) over the Right Upright (16). Secure using three Plastic Fixing Insert (72) and four M4 x 15mm Screw (70). Visit us at: www.evofitness.com
ملخص المحتوى في الصفحة رقم 16
16 FX20 MOTORIZED TREADMILL FOLDING INSTRUCTIONS FOLLOW THESE INSTRUCTIONS TO FOLD UP YOUR TREADMILL: Your treadmill can be folded up for space saving storage space. Simply lift the deck up from the rear of the treadmill and fold up until it locks in place. TO PREVENT INJURY BE SURE YOU HAVE A FIRM HOLD WHEN RAISING THE DECK. You will hear a “click” sound as the lock engages. Stand behind the treadmill and lift the deck up. Raise the deck up until th
ملخص المحتوى في الصفحة رقم 17
17 FX20 MOTORIZED TREADMILL UNFOLDING INSTRUCTIONS FOLLOW THESE INSTRUCTIONS TO UNFOLD YOUR TREADMILL: To unfold the treadmill for use, begin by standing behind and supporting the deck with your hands. Next release the lock with your foot by stepping on the release lever. TO PREVENT INJURY BE SURE YOU HAVE A FIRM HOLD ON THE DECK BEFORE RELEASING THE LOCK. Slowly lower the deck until it rests securely on the ground. Support the deck and release the lock with your f
ملخص المحتوى في الصفحة رقم 18
18 FX20 MOTORIZED TREADMILL TRANSPORT INSTRUCTIONS How to fold up the treadmill: Your treadmill can be folded up for space saving storage. To do this follow the instructions here: 1. Start by first folding up the running deck as described on the FOLDING INSTRUCTIONS page in this manual. Remove the lock pin from Transportation Wheel bracket as shown. Then lift the treadmill a little bit up from the end of handlebars. You will see the Transportation Wheel Bracket sp
ملخص المحتوى في الصفحة رقم 19
19 FX20 MOTORIZED TREADMILL COMPUTER OPERATION Safety Key A B START Button INCLINE UP/DOWN Buttons C D SPEED UP/DOWN Button STOP/ENTER Button E F Reference Guide G MOTION CONTROL BUTTONS FUNCTION START – Press to start exercise at initial speed 0.5MPH / 0.8KPH. STOP / ENTER a. Press to confirm program and preset function values setting mode. b. Press to run setting procedure before pressing the START KEY. c. Press to stop exercise during workout t
ملخص المحتوى في الصفحة رقم 20
20 FX20 MOTORIZED TREADMILL COMPUTER OPERATION SAFETY KEY The safety key must be inserted into the slot on the console in order to operate the treadmill. Always insert the safety key and attach the clip to your clothing at your waist before beginning your workout. If you should encounter problems and need to stop the motor quickly, simply pull on the cord to disengage the safety key from the console. To continue operation first turn the power switch to off and set the speed con
