ملخص المحتوى في الصفحة رقم 1
User Guide
MC100CM
MC110CS
Fast Ethernet Media Converter
MC111CS
MC112CS
WDM Fast Ethernet Media Converter
Rev ： 2.0.2
7106503773
ملخص المحتوى في الصفحة رقم 2
COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-LINK TECHNOLOGIES CO., LTD. Copyright © 2013 TP-LINK TECHNOLOGIES C
ملخص المحتوى في الصفحة رقم 3
FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio commun
ملخص المحتوى في الصفحة رقم 4
IC STATEMENT This Class A digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.
ملخص المحتوى في الصفحة رقم 5
CONTENTS Package contents ...........................................................................1 Chapter 1 Introduction ...............................................................2 1.1 Overview of the Converter ..........................................2 1.2 Conventions ................................................................3 1.3 Features......................................................................3 1.4 Connectors and Network Cables Supported...............3
ملخص المحتوى في الصفحة رقم 6
Package contents The following items should be found in your package: One Converter One AC-DC Power Adapter (DC9V/600mA) One User Guide One Purchasing Guide Note: Make sure that the package contains the above items. If any of the listed items are damaged or missing, please contact your distributor. 1
ملخص المحتوى في الصفحة رقم 7
Chapter 1 Introduction Thank you for choosing the MC100CM/MC110CS Fast Ethernet Media Converters or the MC111CS/MC112CS WDM Fast Ethernet Media Converters! 1.1 Overview of the Converter MC100CM and MC110CS are Fast Ethernet Media Converters. MC111CS and MC112CS are WDM Fast Ethernet Media Converters, which adopt WDM (Wavelength Division Multiplexing) technology that increases the information carrying capacity of fiber via multiplex transmit and receive signals at different wavelengths
ملخص المحتوى في الصفحة رقم 8
1.2 Conventions The Converter mentioned in this guide stands for Fast Ethernet Media Converters or the WDM Fast Ethernet Media Converters without any explanation. The TP port mentioned in this User Manual stands for the TX port without any explanations. Note: The four converters are sharing this User Guide. The differences between them please refer to the table of the section 1.4. 1.3 Features Complies with 802.3u 10/100Base-TX, 100Base-FX standards. Provides one SC fiber conne
ملخص المحتوى في الصفحة رقم 9
Connectors: RJ-45, SC. Network Cables: Cat.5 Twisted-Pair (below abbreviated as TP), 9/125um Single-mode fiber and 50/125, 62.5/125um Multi-mode fiber. Transmission Transmission Output Center Model NO. Interface Distance Media Wavelength Multi-mode MC100CM RJ45--SC 2km 1310nm Fiber, TP Single-mode MC110CS RJ45--SC 20km 1310nm Fiber, TP Single-mode 1550nmTX MC111CS RJ45--SC 20km Fiber, TP 1310nmRX Single-mode 1310nmTX MC112CS RJ45--SC 20km Fiber, TP 1550nmRX 1.5 Appearance In
ملخص المحتوى في الصفحة رقم 10
Name Status Indication On Power on PWR Off Power off On The Link Fault Pass Through function enable. LFP Off The Link Fault Pass Through function disable. On There’s a valid link. The converter is receiving or transmitting FX Link/Act Flashing data from the fiber optic connector. Off There’s no valid link. On The TP port is connected to 100Base-Tx SPD The TP port is connected to 10Base-Tx Off device or no connection. The TP port is operating in Full-Duplex On Flashing There
ملخص المحتوى في الصفحة رقم 11
1.5.2 Switch TP_AUTO: The TP port operates in Auto-Negotiation mode; TP_DIS: The TP port operates in FORCE mode; TP_100M: The TP port operates in 100Base-Tx; TP_10M: The TP port operates in 10Base-T mode; TP_FDX: The TP port operates in Full-Duplex mode; TP_HDX: The TP port operates in Half-Duplex mode; LFP_OFF: The Link Fault Pass Through function disable; LFP_ON: The Link Fault Pass Through function enable. Connect different devices, we suggest leaving the switches like th
ملخص المحتوى في الصفحة رقم 12
The Mode Of The Device Switch TP_AUTO, TP_100M, TP_FDX, TP:AUTO; LFP ON LFP_ON TP_AUTO, TP_100M, TP_FDX, TP:AUTO; LFP OFF LFP_OFF TP_DIS, TP_100M, TP_FDX, TP:FORCE,100M,FULL; LFP ON LFP_ON TP_DIS, TP_100M, TP_FDX, TP:FORCE,100M,FULL; LFP OFF LFP_OFF (TP_DIS or TP_AUTO), TP_100M, TP:FORCE,100M, HALF; LFP ON TP_HDX, LFP_ON (TP_DIS or TP_AUTO), TP_100M, TP:FORCE,100M, HALF; LFP OFF TP_HDX, LFP_OFF TP_DIS, TP_10M, TP_FDX, TP:FORCE,10M,FULL; LFP ON LFP_ON TP_DIS, TP_10M, TP_FDX,
ملخص المحتوى في الصفحة رقم 13
With the Link Fault Pass Through function enabled (optional with switch LFP), TP port and FX port of the same converter will inform each other the fault link status so that when one side of the link fails, the other side will force the link to shut down as soon as noticed. The procedure will be illustrated as shown below. If link fail happens on TP port (A), the FX port (A) sends non-idle pattern to notice the FX port (B). The FX port (B) then forces its TP port (B) to link failed aft
ملخص المحتوى في الصفحة رقم 14
Chapter 2 Installation Guide 2.1 Fast Ethernet Media Converter 1. The SC fiber connector of MC100CM transmits/receives data by 1310nm short wave laser on multi-mode fiber. 2. The SC fiber connector of MC110CS transmits/receives data by 1310nm short wave laser on single-mode fiber. Transmits and receives data on different fibers Note: You have to use either two MC100CM connectors or two MC110CS connectors to cooperate. 2.2 WDM Fast Ethernet Media Converter 1. The SC fiber connect
ملخص المحتوى في الصفحة رقم 15
2. The SC fiber connector of MC112CS transmits data by 1310nm short wave laser while receives data by 1550nm short wave laser on one single-mode fiber. Transmits and receives data on the same fiber Note: You have to use MC111CS and MC112CS at the same time to cooperate. 10
ملخص المحتوى في الصفحة رقم 16
Chapter 3 Configuration In order to achieve the aim of effectively expanding a Fast Ethernet network, you can use the converter like the following examples: 1. Place two converters back to back between the following end devices. Note: You should use two MC100CM Media Converters or two MC110CS Media Converters, or one MC111CS and one MC112CS to expand your network. Error will occur when you use other ways. 2. Another effective application is to place one converter directly between
ملخص المحتوى في الصفحة رقم 17
3.1 Installation Procedure Use a fiber cable to connect two converters, or connect a converter with a 100Base-FX Device. 1. Connection of a Converter and a 10/100Base-TX Device (HUB or Switch). • Make sure that the length of the Cat.5 twisted pair cable between the 10/100Base-TX device and the converter is less than 100 meters. • Connect one end of the Cat.5 twisted pair cable to the RJ45 jack on the converter and the other end of the cable to the RJ45 jack on the 10/100Base-TX devic
ملخص المحتوى في الصفحة رقم 18
Appendix: Specifications Standard IEEE 802.3 / IEEE 802.3u Connector 1 SC fiber optic; 1 RJ45 jack Cat.5 Twisted Pair:100m Max. Multi-mode Fiber Optic: 2km Distance Single-mode Fiber Optic: 20km Operation: 0ºC ～ 40ºC Temperature Storage: -40ºC ～ 70ºC Storage: 5% ～ 90% RH Non-condensing Humidity Working: 10% ～ 90% RH Non-condensing 13
