Yamaha RX-V1700 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

COMPONENT VIDEO
YAMAHA ELECTRONICS CORPORATION, USA

6660 Orangethorpe Avenue, Buena Park, CA 90620
December 11, 2006
Subject: RX-V1700 or HTR-6090 Firmware Update
Yamaha has found that in some instances when switching between certain digital signals on an
RX-V1700 or HTR-6090, the digital signal will mute for an extended period of time or will not return.
Yamaha is offering a firmware update to correct this issue.
This quick update was designed so that a user can complete the update the

ملخص المحتوى في الصفحة رقم 2

Step 3. Insert the Firmware Update CD (Audio CD) into the CD/DVD Player and close the tray. If the disc begins to play, press the STOP botton on the CD/DVD Player. 3a) If a DVD Player is being used to perform this update, make sure that the DVD Player is set to PCM Digital Bitstream. See the DVD Player Owner’s Manual for instructions on how to configure the PCM Digital Bitstream. Once update is complete, restore DVD Player to its original settings. AC IN To the AC wall

ملخص المحتوى في الصفحة رقم 3

Step 7. Press the PLAY button on the digitally connected CD/DVD Player to start the firmware update. Once the firmware update starts, it will complete automatically in approximately 4 minutes. 7a) During this time do not press any buttons on the device. DO NOT switch off or interrupt the AV receiver during the firmware update process! 7b) If an unintended failure occurs, you may start the update process again from the begining. Step 8. When the firmware update is complete, the AV Re