American Standard 2555.501 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

Installation
Instructions
TOWNSQUARE
2555.501
PRESSURE BALANCING SHOWER SET
with EverClean™ Finish
Congratulations on purchasing your American Standard faucet with
EverClean finish found only on American Standard faucets.
EverClean Finish
• One wipe effortlessly removes spots
 Eliminates the need for cleaners and scrubbing
 Permanent surface protectant remains beautiful
for the life of the faucet
Certified to comply with ANSI A112.18.1
 EverClean™ available on: Polished Chrome, Satin

ملخص المحتوى في الصفحة رقم 2

7 5 3 1 1 1 5 5 0 1 1 3 3 1 1 1 1 9 9 7 7 5 5 3 3 1 1 INSTALL HANDLE INSTALL TRIM 2 3 CAUTION: Protect finish on SHOWER ARM and SHOWER HEAD when installing. Install HANDLE BUSHING (1) onto CAP (2). When finished tiling the wall, remove PLASTER GUARD (A) Find correct position of HANDLE (3) and push and turn off water supply. HANDLE (3) onto VALVE STEM (4). Push CAP (1) over VALVE CARTRIDGE (2). Install HANDLE SCREW (5) and push in INDEX CAP (6). Mount ESCUTCHEON (3) and gasket to valve body with

ملخص المحتوى في الصفحة رقم 3

TO GAIN ACCESS TO VALVE FOR SERVICING 5 Pull INDEX CAP, unscrew HANDLE SCREW and pull HANDLE off valve stem. Remove two SCREWS holding ESCUTCHEON and remove ESCUTCHEON. Remove COVER by pulling straight out. Shut off water supply by either closing off main water supply, or closing off the hot and cold CHECK STOPS on valve. VALVE LEAKS WHEN SHUT OFF Remove CARTRIDGE (1) by removing CARTRIDGE SCREWS (2). Remove three SCREWS (3) from FIXATION RING (4) and pull out PRESSURE BALANCING (5) unit. Clean