Bosch Appliances VJR-A3-SP دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

VJR-A3-SP Support Bracket
VJR-A3-SP
en Installation Guide

ملخص المحتوى في الصفحة رقم 2

ملخص المحتوى في الصفحة رقم 3

4 en | VJR-A3-SP In-ceiling Support Bracket Installation Guide VJR-A3-SP Support Bracket 1 VJR-A3-SP In-ceiling Support Bracket Installation Guide 1.1 Important Safety Instructions Read, follow, and retain all of the following safety instructions. Heed all warnings on the unit and in the operating instructions before operation. 1. Clean only with a dry cloth. Do not use liquid cleaners or aerosol cleaners. 2. Do not install unit near any heat sources such as radiators, heaters, stoves, or othe

ملخص المحتوى في الصفحة رقم 4

VJR-A3-SP Support Bracket Installing the VJR-A3-SP Support Bracket | en 5 2 Installing the VJR-A3-SP Support Bracket To secure the VJR-A3-SP kit to a suspended ceiling: 1. Locate the bracket assembly at the desired location. Loosen the securing screws on the base bracket assembly (refer to Figure 2.3) enough to retain the suspension bars during handling, but allowing adjustment during installation. Figure 2.1 Ceiling Mounting (Top View) 1 Ceiling Tile 2 Suspension Bars 3 Ceiling Base Bracket 4

ملخص المحتوى في الصفحة رقم 5

6 en | Installing the VJR-A3-SP Support Bracket VJR-A3-SP Support Bracket 3. Tighten the four (4) bracket securing screws located in each corner. Figure 2.3 Bracket Securing Screws 4. Secure the bracket assembly to an overhead securing point using a user-supplied safety cable. Figure 2.4 Safety Cable Fitment 5. Use two (2) pencils (or a pencil and nail) and the template tool to trace a 200 mm diamter hole with a tolerance of ±2.2 mm (7.8 in. ± 1/8 in.) in the center of the mounting plate. 6.

ملخص المحتوى في الصفحة رقم 6

ملخص المحتوى في الصفحة رقم 7

ملخص المحتوى في الصفحة رقم 8

Bosch Security Systems, Inc. www.boschsecurity.com © Bosch Security Systems, Inc., 2010