ملخص المحتوى في الصفحة رقم 1
Operator's Manual
ICRA MAN°I
flEX E
12.0-VOLT LITHIUM-ION
CORDLESS RIGHT-ANGLE
IMPACT DRIVER
Model No. 320.17562
c_ius
LISTED
• Warranty
Powered by an
• Safety
ENERGYSTAR _
• Assembly
qualified battery
charger for a
• Operation
better environment
• Maintenance
_k WARNING: To reduce the risk of • Espa_ol
injury, the user must read and understand
Charge battery
the Operator's manual before using
before first use
this product.
Sears Brands Management Corporation, Hoffman Estates,
IL 60179 U.S.A.
ww
ملخص المحتوى في الصفحة رقم 2
In uPL4 -'1ml _[o_ [_o__ The purpose of safety symbols is to attract your attention to possible dangers. Warranty page 2 The safety symbols and the explanations with them deserve your careful Safety Symbols page 3 attention and understanding. The symbol warnings do not, by themselves, eliminate any danger. The instructions and warnings they give are no substitutes Safety Instructions page 5 for proper accident prevention measures. Description page 9 WARNING: Be sure to read and understand all sa
ملخص المحتوى في الصفحة رقم 3
SAVE THESE INSTRUCTIONS Some of these following symbols may be used on this tool. Please study them GENERAL POWER TOOL SAFETY WARNINGS and learn their meaning. Proper interpretation of these symbols will allow you to operate the tool better and safer. _, WARNING: Read all safety warnings and instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious SYMBOL NAME DESIGNATION/EXPLANATION personal injury. V Volts Voltage Save all warnings and inst
ملخص المحتوى في الصفحة رقم 4
• Use the battery only with the charger listed: Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate BATTERY PACK CHARGER the power tool. Power tools are dangerous in the hands of untrained users. 320.11221 320.10006 Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the PERSONAL SAFETY power tool's operation. If damaged, have the
ملخص المحتوى في الصفحة رقم 5
SPECIFIC SAFETY RULES FOR CORDLESS RIGHT ANGLE IMPACT DRIVER _]__o_j Hold power tools by insulated gripping surfaces when performing an KNOW YOUR RIGHT-ANGLE IMPACT DRIVER (Fig.l) operation where the tool may contact hidden wiring or its own cord. Fig. 1 Contact with a "live" wire will also make exposed metal parts of the tool "live" and shock the operator. Secure the workpiece. Clamping devices or a vise will hold the workpiece Sleeve in place better than the hand Direction of Always wait until
ملخص المحتوى في الصفحة رقم 6
A • If any parts are damaged or missing, please refer to the numbers listed on ABt,WARNING: The safe use of this product requires an understanding of the the back page of operator's manual. information on the tool and in this operator's manual, as well as knowledge of the project you are attempting. Before use of this product, familiarize yourself PACKING LIST with all operating features and safety rules. Right-Angle Impact Driver, soft case, 1-3/8" Phillips screwdriver bit, 1A" nut VARIABLE SPE
ملخص المحتوى في الصفحة رقم 7
BATTERY PROTECTION 1. Charge the Lithium-Ion I Fig. 2 battery pack with the The battery circuitry protects the battery pack from extreme temperature, correct charger. over-discharge, and over-charge. To protect the battery from damage and 2. Connect the charger to a prolong its life, the battery pack circuitry will turn off the battery pack if it becomes overloaded or if the temperature becomes too high during use. This power supply. may happen in extremely high torque, binding, and stalling sit
ملخص المحتوى في الصفحة رقم 8
CHARGING A HOT BATTERY PACK direction of rotation (forward/center IocW reverse) selector in the center position. If the battery pack is above normal temperature range, the red LED will illuminate and the green LED will be off. When the battery pack cools down to 2. Align the raised rib on the battery pack with the grooves in the Right-Angle Impact Driver, and then insert the battery pack into the tool. approximately 104°F (40°C), the charger will automatically begin charging. CHARGING A COLD BAT
ملخص المحتوى في الصفحة رقم 9
DIRECTION-OF-ROTATION SELECTOR (FORWARD/CENTER LOCK/ LED WORKLIGHT (Fig. 7) Fig. 7 REVERSE) (Fig. 5) The LED worklight, located on The direction of bit rotation is reversible and is controlled by a selector located the front of the 12V Right-Angle above the trigger switch. With the Right-Angle Impact Driver held in normal Impact Driver, will illuminate LED Worklight operating position: when the trigger switch is depressed. 1. Position the direction-of-rotation selector to the left of the tool fo
ملخص المحتوى في الصفحة رقم 10
TIGHTENING SCREWS AND I_f-'l I11i 11I-'I1[*']=1 Fig. 9 NUTS (Fig. 9) \ A All WARNING: To avoid serious personal injury, always remove the battery 1. Install the correct bit. pack from the tool when cleaning or performing any maintenance. 2. Apply just enough pressure WARNING: When servicing, use only identical Craftsman replacement parts. to keep the bit engaged on Use of any other parts may create a hazard or cause product damage. the screw or nut. & _. WARNING: It is not recommended to use com
ملخص المحتوى في الصفحة رقم 11
BATTERIES: The battery pack is equipped with Lithium-Ion rechargeable batteries. The duration of use from each charge will depend on the type of work performed. PROBLEM CAUSE SOLUTION The tool does not work The batteries in this tool have been designed to provide maximum trouble- Battery is depleted Charge the battery free life. Like all batteries, they will eventually wear out. Do not disassemble Release the sleeve Sleeve is not released the battery pack or attempt to replace the batteries. Han
ملخص المحتوى في الصفحة رقم 12
12.0-VOLT LITHIUM-ION CORDLESS RIGHT-ANGLE IMPACT DRIVER MODEL NO. 320. 17562 1 2730137000 DC Motor 1 The Model Number will be found on the Nameplate attached to the handle of the 2 3123113000 LED Cover 1 Right-Angle Impact Driver. Always mention the Model Number when ordering parts for this tool. 3 3123120000 Light Guide Pole 1 Exloded View 4 3125334000 F/R Button 1 5 3125534000 Switch Trigger 1 6 3321025000 Left Housing Assy 1 7 3321026000 Right Housing Assy 1 8 3402298000 Contact Receptacle A
ملخص المحتوى في الصفحة رقم 13
_o_nul 30 5650192000 Washer 1 31 5650254000 Washer 2 32 5650349000 Washer 1 33 5650366000 Washer 2 34 5660035000 Circlips For Shaft 1 35 5690207000 Washer 1 36 5690222000 Washer 1 37 5700003000 Ball Bearing 2 38 5700044000 Steel Ball 23 39 5700053000 Needle Bearing 1 40 5700176000 Ball Bearing 1 41 5700178000 Steel Ball 2 42 5700226000 Steel Ball 2 17562 ManuaLRevised_lO 0607 Page 24 17562 ManuaLRevised_lO 0607 Page 25
ملخص المحتوى في الصفحة رقم 14
_o_nul _o_nul 17562 ManuaLRevised_lO 0607 Page 26 17562 ManuaLRevised_lO 0607 Page 27
ملخص المحتوى في الصفحة رقم 15
Your Home For troubleshooting, product manuals and expert advice: managemylife www.managemylife.com For repair- in your home - of all major brand appliances, lawn and garden equipment, or heating and cooling systems, no matter who made it, no matter who sold it! For the replacement parts, accessories and owner's manuals that you need to do-it-yourself. For Sears professional installation of home appliances and items like garage door openers and water heaters. 1-800-4-MY-HOME ® Ca, anytime, dayor
