Harbor Freight Tools 90849 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

ADIRONDACK CHAIR
90849
ASSEMBLY AND OPERATING INSTRUCTIONS
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our Web site at http://www.harborfreight.com
®
Copyright © 2003 by Harbor Freight Tools . All rights reserved. No portion of this manual or
any artwork contained herein may be reproduced in any shape or form without the express
written consent of Harbor Freight Tools.
For technical questions and replacement parts, please call 1-800-444-3353

ملخص المحتوى في الصفحة رقم 2

Specifications Comfortable natural Fir wood Adirondack chair. Dimensions: Overall: 33”L x 36”W x 37”H Back Seat Height: 10” Seat Area:18-1/2”D x 22”W Back Slat Length: 32” Arm Rest: 31-1/4”L x 5-1/8”W Front Legs: 21”L x 3”W x 7/8” Front Seat Height: 15” Side Legs: 35-1/2”L Weight: 18.7 lbs. Weight Capacity: 250 lbs. Save This Manual You will need the manual for the safety warnings and precautions, assembly instructions, operating and maintenance procedures, parts list and diagram. Keep your inv

ملخص المحتوى في الصفحة رقم 3

8. Use eye and ear protection. Always wear ANSI approved impact safety goggles during assembly. Wear a full face shield if you are producing wood chips. Wear an ANSI approved dust mask or respirator when working around wood, and chemical dusts and mists. 9. Take caution as some woods contain preservatives such as copper chromium arsenate (CCA) which can be toxic. When cutting these materials extra care should be taken to avoid inhalation and minimize skin contact. 10. Check for damaged parts.

ملخص المحتوى في الصفحة رقم 4

Assembly Carefully unpack the parts and check for damaged or missing parts. 1. Attach Left Front Leg (C1) and Right Front Leg (C2) to Seat (B) using 3 Bolts (H) per side. Use the included washers and nuts to tighten. 2. Attach both Back Supports (D) to the inner sides of the Seat (B) using 2 Bolts (H) per side. Tighten using the included washers and nuts. 3. Attach the Left Arm (E1) and Right Arm (E2) to the Front Legs (C1, C2) using 2 Wood Screws (G) per side. Attach the Arms (E1, E2) to the Ba

ملخص المحتوى في الصفحة رقم 5

Assembly Drawing SKU 90849 Page 5

ملخص المحتوى في الصفحة رقم 6

Parts List Back Seat Left Front Leg Right Front Leg Back Support Left Arm Right Arm Front Support Wood Screws 55mm Bolt 65mm Bolt with Washer and Nut with Washer and Nut NOTE: Some parts are listed and shown for illustration purposes only and are not available individually as replacement parts. PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER T