ملخص المحتوى في الصفحة رقم 1
English Español
For Your Records and
Warranty Assistance
T T Type 3 Models ype 3 Models ype 3 Models
For reference, also attach your receipt or a copy
of your receipt to the manual.
Owner’s Guide and Installation Manual
__________________________________________
Model Name
__________________________________________
Model No.
__________________________________________
Date Purchased
__________________________________________
Where Purchased
Form# 45031-01
20090910
©2009 Hunter Fan Co.
ملخص المحتوى في الصفحة رقم 2
Welcome Your new Hunter ceiling fan is an addition to your home or office that ® will provide comfort and performance for many years. This installation and operation manual gives you complete instructions for installing and operating your fan. We are proud of our work. We appreciate the opportunity to supply you with the best ceiling fan available anywhere in the world. Before installing your fan, for your records and warranty assistance, record information from the carton and Hunter namepl
ملخص المحتوى في الصفحة رقم 3
Installer’s Choice and Optional Accessories Understanding Mounting and Installer’s Choice® Support Brace Hunter’s patented 3-position mounting system provides you maximum installation flexibility and ease. You can install your Hunter fan in one of three ways, depending on ceiling height and your preference: Low Profile, Standard, or Angled mounting. The steps in this manual include Ceiling Standard instructions for all three Installer’s Choice mounting methods. Outlet Box Mounting Style Co
ملخص المحتوى في الصفحة رقم 4
1 • Getting Ready To install a ceiling fan, be sure you can do the following: • Locate the ceiling joist or other suitable support in ceiling. • Drill holes for and install wood screws. • Identify and connect electrical wires. • Lift 40 pounds. If you need help installing the fan, your Hunter fan dealer can direct you to a licensed installer or electrician. Gathering the Tools You will need the following tools for installing the fan: • Electric drill with 9/64” bit • Standard screwdriver (magne
ملخص المحتوى في الصفحة رقم 5
2 • Installing the Ceiling Plate CAUTION: To avoid possible electrical shock, before installing your fan, Toward disconnect the power by turning off the circuit breakers to the outlet box Ceiling Peak and associated wall switch location. If you cannot lock the circuit breakers in the off position, securely fasten a prominent warning device, such as a tag, to the service panel. 2-1. Drill two pilot holes into the wood support structure through the outermost holes in the outlet box. The pi
ملخص المحتوى في الصفحة رقم 6
3 • Assembling and Hanging the Fan WARNING: Fan may fall if not assembled as directed in these Steps 3-2 – 3-3 installation instructions. 3-1. Unbundle the wires from the fan and remove the paper caution Downrod tag. Do not discard the tag until your installation is complete. For Standard or Angled mounting: Canopy Adapter 3-2. To assemble fan to hang down from a flat or angled ceiling, Cover insert the downrod through the canopy, adapter cover grommet, Grommet adapter cover, and can
ملخص المحتوى في الصفحة رقم 7
4 • Setting the Remote Transmitter and Receiver You must now set the jumpers in the remote transmitter and receiver Example Jumpers Settings so that they match. Receiver 1 Receiver 2 4-1. Change the position of the jumpers in the transmitter and the 4 3 2 1 4 3 2 1 receiver. Be sure the position of the jumper in the transmitter 4 3 2 1 4 3 2 1 matches the position of the jumper in the receiver. If they don’t match, the controller will not function. For instructions on how to set the jumpers
ملخص المحتوى في الصفحة رقم 8
5 • Wiring the Fan All wiring must be in accordance with national and local electrical codes and ANSI/NFPA 70. If you are unfamiliar with wiring, use a qualified electrician. 5-1. Make sure the power is still off. 5-2. To connect the wires, hold the bare metal leads together and place a wire connector over them, then twist clockwise until tight. For all these connections use the wire connectors provided. CAUTION: Be sure no bare wire or wire strands are visible after making connection
ملخص المحتوى في الصفحة رقم 9
6 • Installing the Canopy and Canopy Trim Ring WARNING: Failure to complete the following steps could cause the fan Step 6-1 to fall. Note: It is recommended you use a magnetic tip screwdriver for the following steps. Tab 6-1. Rotate the hanger ball so the tab in the canopy is secure in the hanger ball groove. Note: Your fan may have multiple tabs and Groove grooves that must be aligned. 6-2. Swing the fan up to align the canopy screw holes with the mounting holes on the ceiling plate.
ملخص المحتوى في الصفحة رقم 10
7 • Installing the Blades and Bulb 7-1. Attach each blade to a blade iron using four blade Step 7-1 washers and four blade assembly screws. Blade Assembly Screws 7-2. Insert the pins of the included GU10, 35-Watt, halogen light bulb into the holes of the lamp socket. Turn the bulb clockwise to secure it into place. 7-3. Check the position of the bulb to make sure it is not Blade Washers off-center. If it looks crooked, uninstall the bulb. Then, flip the bulb so the pins match up the opposit
ملخص المحتوى في الصفحة رقم 11
8 • Operating the Remote Control and Mounting the Holder 8-1. The remote transmitter has four numerical buttons: 0 = Off 1 = Low speed 2 = Medium speed Off 3 = High speed Switch 8-2. For best operation, start the fan by pressing 3 (high), and then Up select your desired speed. Dimmer 8-3. The up dimmer turns the light on and can be used to increase Down Dimmer the brightness if the light is already on. 8-4. The down dimmer turns the light off. You can also use it to dim the light
ملخص المحتوى في الصفحة رقم 12
9 • Operating and Cleaning Your Ceiling Fan 9-1. Turn on electrical power to the fan. 9-2. The remote controls power to the fan. The fan has four settings in sequence: High, Medium, Low and Off. 9-3. Ceiling fans work best by blowing air downward (counterclockwise blade rotation) in warm weather to cool the room with a direct breeze. In winter, having the fan draw air upward (clockwise blade rotation) will distribute the warmer air trapped at the ceiling around the room without causing a dr
ملخص المحتوى في الصفحة رقم 13
10 • Troubleshooting Problem: Nothing happens; fan does not move. 1. Turn power on, replace fuse, or reset breaker. 2. Loosen canopy, check all connections according to the wiring the fan section. 4. Push motor reversing switch firmly left or right to ensure that the switch is engaged. Problem: Noisy operation. 1. Tighten the blade assembly screws until snug. 2. Check to see if the blade is cracked. If so, replace all the blades. Problem: Excessive wobbling. 1. If your fan wobbles when ope
