ملخص المحتوى في الصفحة رقم 1
Dual Alarm AM/FM Clock Radio
®
with SmartSet
Automatic Time Setting System
(U.S. Patent No. 6,567,344)
OWNER’S MANUAL
CKS2235
Visit our web site at www.emersonradio.com
CKS2235_032106.p65 23 21/3/2006, 11:00
ملخص المحتوى في الصفحة رقم 2
CAUTION TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN ! The lightning flash with arrow- WARNING: TO REDUCE THE The exclamation point within head symbol, within an equi- an equilateral triangle is in- RISK OF ELECTRIC SHOCK lateral triangle is inten
ملخص المحتوى في الصفحة رقم 3
Congratulations! ® And thank you for purchasing the SmartSet Clock Radio from Emerson Research. ® SmartSet is the world’s first and only LED clock radio that will automatically set itself to the correct ‘ Year’ , ‘ Month’ , ‘ Date’ , ‘ Day’ , and ‘ Time’ as soon as you plug it in. ® The only thing you have to do is tell the SmartSet what time zone you are in, and the built in computer does everything else for you immediately. And not only the first time, but every time the power is interrupted a
ملخص المحتوى في الصفحة رقم 4
IMPORTANT NOTES • Avoid installing this unit in places • Operate controls and switches as exposed to direct sunlight or close to described in the manual. heat radiating appliances such as • Before turning on the power, make electric heaters, on top of other stereo certain that the power cord is properly equipment that radiates too much installed. heat, places lacking ventilation or dusty • When moving the set, be sure to first areas, places subject to constant disconnect the AC power cord. vibra
ملخص المحتوى في الصفحة رقم 5
PREPARATION FOR USE UNPACKING AND SET UP • Remove the radio from the carton and remove all packing material from the radio. We suggest that you save the packing material, if possible, in the unlikely event that your radio ever needs to be returned for service. The original carton and packing material is the only safe way to pack your radio to protect it from damage in transit. • Remove any descriptive labels or stickers on the front or top of the cabinet. Do not remove any labels or stickers
ملخص المحتوى في الصفحة رقم 6
POWER SOURCE This radio is designed to operate on normal 120V 60Hz AC power only. Do not attempt to operate the radio on any other power source. You could cause damage to the radio that is not covered by your warranty. This radio should be connected to an AC outlet that is always ‘ live’ . Do not connect it to an outlet that is controlled by a wall switch. When the power to the radio is interrupted, the built in lithium battery takes over to maintain the time and alarm settings. To maximize the
ملخص المحتوى في الصفحة رقم 7
LOCATION OF CONTROLS AND INDICATORS 5 6 SNOOZE 4 SENSOR 3 7 2 8 1 9 15 14 16 17 18 13 19 12 20 21 11 22 10 25 26 27 24 28 23 6 CKS2235_032106.p65 6 21/3/2006, 11:00
ملخص المحتوى في الصفحة رقم 8
1.) Day LED Indicators. 2.) Lighted Dial Pointer. 3.) ALM 1 ‘ On’ Indicator. 4.) SNOOZE SENSOR. 5.) AM indicator. 6.) Time/Date Display. 7.) ALM 2 ‘ On’ Indicator. 8.) LOW BATT. LED Indicator. 9.) Back Up Battery Compartment (Bottom Cabinet). 10.) SNOOZE (SLEEP OFF) Button. 11.) RADIO ON/OFF Button. 12.) MONTH/DATE Setting Button. 13.) TIME Setting Button. 14.) AC Power Cord (Back Cabinet). 15.) Speaker (Back Cabinet). 16.) TIME ZONE Button. 17.) ALARM 1 setting Button. 18.) AL
ملخص المحتوى في الصفحة رقم 9
OPERATING INSTRUCTIONS SETTING THE TIME, THE FIRST TIME ® IMPORTANT: The first time you connect your new SmartSet clock radio to the AC outlet the internal computer will automatically set the time correctly for the Eastern Time Zone, which is the initial default setting. The display will scan for a few seconds and then show the correct Day and Time in the Eastern zone. If you live in the Eastern Time zone, there’ s nothing else to do. Your clock is set correctly and running. If you do not live i
ملخص المحتوى في الصفحة رقم 10
DATE DISPLAY To see the correct date at any time, depress the MONTH/DATE button. The display st changes from time to month and date (MM/DD). For example, May 21 will appear as “5 21”. When you release the MONTH/DATE button the display returns to the correct time. YEAR DISPLAY To see the correct year, depress the MONTH/DATE and TIME buttons together. The display changes from time to year. When you release the MONTH/DATE and TIME buttons the display returns to the correct time. DAYLIGHT SAVING AN
ملخص المحتوى في الصفحة رقم 11
MANUAL TIME ADJUSTMENTS Some people like to set their clocks 5 to 10 minutes fast to make sure that they will ® always be on time. Even though the SmartSet sets the time by itself, you still have the option of adjusting the time manually if you wish. To manually adjust the time display depress and hold the TIME button, and press either the SET + or – buttons to adjust the time display ahead or back as desired. Each press of the SET + or – buttons will change the display by one minute. If you h
ملخص المحتوى في الصفحة رقم 12
SELECTING THE ALARM MODE ® Your SmartSet clock radio allows you to select from among three different alarm operation modes for either alarm. The alarm modes are: • Everyday – the alarm will turn on all 7 days. • Weekdays only – the alarm will only turn on Monday through Friday; • Weekends only – the alarm will only turn on Saturday and Sunday; To check the Alarm Mode setting for Alarm 1, depress the ALARM 1 setting button. The display will show the Alarm 1 wake up time and the day of the week
ملخص المحتوى في الصفحة رقم 13
LISTENING TO THE RADIO 1.) Set the Band selector to the desired band, AM or FM. 2.) Set the VOLUME control to a low setting. 3.) Press the RADIO ON/OFF button to turn the radio ‘ On’ . The radio dial pointer will light. 4.) Select your desired station with the TUNING control. 5.) Adjust the Volume control to the desired setting. 6.) When you are finished listening, press the RADIO ON/OFF button to turn the radio ‘ Off’ . The radio dial pointer light goes off. ANTENNA INFORMATION AM – The AM bar
ملخص المحتوى في الصفحة رقم 14
WAKE TO RADIO 1.) Turn the radio ‘ On’ and select the band, station, and volume level that you wish to hear when the alarm comes on, then turn the radio ‘ Off’ again. 2.) Reconfirm the wake up time and alarm mode settings for the alarm you are using, Alarm 1, Alarm 2, or both alarms. 3.) Set the ALM (Alarm) selector switch for one or both alarms to the ‘RADIO’ position. The appropriate ALM 1 and/or ALM 2 indicators will light up to confirm that the alarms are set. 4.) At the selected wake up tim
ملخص المحتوى في الصفحة رقم 15
RADIO AND BUZZER OPERATION You may also set one alarm for wake to radio and the other for wake to buzzer. Just set the ALM 1 and ALM 2 selector switches to the desired positions. SNOOZE ALARM After the alarm turns on in the morning you can use the Snooze function to grab a few more minutes sleep before the alarm sounds again. To activate the Snooze function you can press the SNOOZE (SLEEP OFF) button on the top cabinet. If you set WAKE TO BUZZER, you can simply wave your hand in front of the SNO
ملخص المحتوى في الصفحة رقم 16
SLEEP TO MUSIC TIMER You can program the sleep timer to play the radio for up to 90 minutes and then shut off automatically. 1.) Press the SLEEP button. The display will briefly show “10” and the radio will begin to play. After 10 minutes the radio will shut off automatically. Each time you press the SLEEP button the sleep timer will start at 10 minutes. This is the sleep timer default setting. 2.) To increase or decrease the amount of time that the radio will play before shutting off, hold the
ملخص المحتوى في الصفحة رقم 17
CHANGING THE LITHIUM BATTERY Like all batteries, eventually the built in lithium battery will need to be replaced. A number of factors, such as, the length of time between the date the radio was manufactured and the date you plugged it in for the first time determine the amount of time before replacement. During this initial storage period, the lithium battery is ® supplying power to the SmartSet computer memory. Once you plug the radio in, your household outlet supplies the power, and the batte
ملخص المحتوى في الصفحة رقم 18
4.) Remove the original battery from the holder and insert the new battery into the holder the same way, observing the positive (+) direction. Slide the holder with the new battery back into the slot in the cabinet. 5.) Replace the screws that secure the battery holder in the cabinet. 6.) Turn the radio right side up and confirm that the LOW BATT indicator is ‘ Off’ . 7.) Save these instructions. You’ll have to do this again five to eight years from now! 17 CKS2235_032106.p65 17 21/3/2006, 11:00
ملخص المحتوى في الصفحة رقم 19
RESETTING THE CLOCK AFTER A TOTAL MEMORY LOSS If you do not change the built in lithium battery within a reasonable period of time after you see the ‘ flashing’ LOW BATT warning indicator, the lithium battery may become exhausted and will no longer be able to supply back up power to the ® SmartSet internal computer. If the unit is disconnected from the AC outlet after ® the battery is exhausted, or if a power interruption occurs, the SmartSet memory will be lost and the clock will need to be res
ملخص المحتوى في الصفحة رقم 20
5.) Depress the TIME button and the SET + button to set the display to the correct time. Be sure to confirm that you have set the time correctly to ‘ AM’ or ‘ PM’ by observing the AM indicator. 6.) After you set the time, reconfirm that the Day, and Month/Date displays are still correct. Make final adjustments if necessary. ® The SmartSet clock memory is now reset and the new lithium battery will maintain it for the next 5 to 8 years, depending on the number and duration of the power outages you
