Simpson PT-22GS دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

1 3
PRE-USE INSPECTION BEFORE LOADING AND FIRING
• ALWAYS pick up a powder actuated tool as if it is loaded. Always point the tool away from yourself and others.
Immediately open the tool to make sure that it is unloaded.
• ALWAYS inspect the tool to make sure that it is clean and in good working order before use. Make sure that the barrel
is free from obstructions.
PT-22GS Powder Actuated Tool
• BEFORE loading the tool, operate it a few times on a solid surface, making sure all parts are mov

ملخص المحتوى في الصفحة رقم 2

6 OPERATING INSTRUCTIONS SAFETY WARNINGS AND USE EJECTING THE POWDER LOAD • NEVER use improper powder loads or fasteners in a powder actuated tool, as they may be unsafe or damage the tool. Never use Eject the powder load by holding the barrel and pulling it forward rapidly. The powder load will be ejected from the chamber and the powder load intended for firearms in a powder actuated tool. This tool is designed for use with 22 caliber neck-down crimped loads, piston will be reset into the firi