ملخص المحتوى في الصفحة رقم 1
Electric Staple Gun
Item# 6525
Model # A688
PLEASE READ AND SAVE THESE INSTRUCTIONS TO ENSURE THE SAFE
AND EFFECTIVE USE OF THIS TOOL
1
ملخص المحتوى في الصفحة رقم 2
TABLE OF CONTENTS Index P. 2 Important Safeguards P. 3 General Safety Rules P.3, 4 List of Main Parts P.5 Tech. Specifications, Contents of Packing P.5 Operation P.6 Determining Proper Staple or Nail Length P.7 Maintenance P.7 Trouble Shooting P.8 Warranty Information P.9 Warranty Card P.11 2
ملخص المحتوى في الصفحة رقم 3
IMPORTANT SAFEGUARDS 1. Staple Gun must not be loaded with staples and nails at the same time. 2. Do not lubricate. The Staple Gun has been lubricated at the factory. Under normal use it will not need further lubrication 3. Do not hold the Staple Gun toward people, it could invite serious injuries. 4. Store Staple Gun a dry locked cabinet and keep it out of reach of children. SAVE ALL INSTRUCTIONS GENERAL SAFETY RULES WARNING! Read and understand all instructions. Failur
ملخص المحتوى في الصفحة رقم 4
PERSONAL SAFETY 1. Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use tool while tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury. 2. Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep your hair, clothing and gloves away from moving parts. It is recommended to wear protective goggles, gloves, sturdy non-slipping
ملخص المحتوى في الصفحة رقم 5
LIST OF MAIN PARTS 1) Switch Pin 2) Trigger 3) Power Cord 4) Open/Lock Switch 5) Staple Feeder 6) Staple Channel Switch Pin Trigger Power Cord Open/Lock Switch
ملخص المحتوى في الصفحة رقم 6
OPERATION For safety concerns, please follow Electric Staple Gun procedures below: 1. Connect the plug to a power outlet or extension cord. 2. Place the Staple Gun so that the bottom of the Staple Gun is lightly touching the work piece you have prepared to staple/nail. 3. Push the Switch Pin to the right. 4. Press the Trigger and the Staple Gun down simultaneously to ensure sufficient impact. Switch Pin Trigge
ملخص المحتوى في الصفحة رقم 7
DETERMINING PROPER STAPLE OR NAIL LENGTH In choosing the proper staple or nail length for the job there are two basic things to consider: 1. Thickness of the material to be stapled 2. Hardness of the wood As a general rule, in hardwood, approximate 3/16” to 1/4” penetration into the wood is sufficient and for soft wood up to approximately 3/8” should be sufficient. However, if the staple used “stands away” from the work - this means that the staple or nail is too long.
ملخص المحتوى في الصفحة رقم 8
TROUBLE SHOOTING QUICK JAMMING RELEASE 1) Release Staple Feeder from Staple Channel (see OPERATION page 7). 2) Push Open/Lock Switch upward this will release Staple Channel (photo 6) 3) Open Staple Channel to remove jammed staples (photo 7). 4) Close Staple Channel and push down Open/Lock Switch. Lock will click ensuring that the lock switch is in locked position (photo 8). ENVIRONMENTAL PROTECTION If the tool should no longer work at all, please make sure that i
ملخص المحتوى في الصفحة رقم 9
WARRANTY INFORMATION LIMITED WARRANTY Thank you for purchasing a top quality KingCraft product. This Electric Staple Gun item #65258 was tested and meets our stringent quality standards. This product is warranted to be free from manufacturing defects in original materials, th including original parts, and workmanship until March 13 . 2006 or 1 year with proof of purchase. The warranty is void if the defect is due to accidental damage, misuse, abuse, neglect, improper repair or altera
ملخص المحتوى في الصفحة رقم 10
10
ملخص المحتوى في الصفحة رقم 11
WARRANTY CARD WARRANTY CARD Electric staple gun, item # 6525, model # A688 In case you find this product to be defective please send it within the warranty period to our service center. To avoid transport damages please send the product in the original packaging. In return you will receive your repaired item, a new product or a refund. This product is warranted to be free from manufacturing defects in original materials, including original parts, and workmanship until March th
ملخص المحتوى في الصفحة رقم 12
12
