Addonics Technologies DCHDIES دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

Addonics

T E C H N O L O G I E S










Diamond Combo Hard Drive



DCHDSAES & DCHDIES

DCHDIEU & DCHDSAEU













User’s Guide






























Version 1.0

ملخص المحتوى في الصفحة رقم 2

FCC Warning Statement This equipment has been tested and found to comply with the limits for a class B Hardware Installation Guide digital device pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential Step 1 installation. This equipment generates, uses and can radiate radio frequency Use a Philips screwdriver to energy. If not installed and used in accordance with the instructions, it may turn

ملخص المحتوى في الصفحة رقم 3

For IDE Drive Cable Connections Note: Set up your IDE hard drive as Master device Connect the 4-Pin Molex cable to the power connector on the IDE hard drive. Carefully place the IDE hard drive with the label facing up into the Diamond enclosure. Push the hard drive towards the back end to secure the drive connectors onto the Diamond enclosure’s IDE connector. Mini-Din power connector Step 4 eSATA On / OFF Turn the Diamond enclosure ov

ملخص المحتوى في الصفحة رقم 4

Cable Connections When Used as an Internal Hard Drive Technical Support Power: Use either the 4-pin Molex or the 15-pin SATA power connector. If you need assistance to get your unit functioning properly, please call Addonics Do not use both power sources simultaneously. Technical Support. Our technical staff will be happy to assist you, but they will need your help to do so. Calling the technical support staff without all the proper Data: information can be both time consumi