Seagate Momentus ST9160821AB دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

Setting the jumpers
Refer to the jumper settings in Figure 1 or on your drive label to configure
the drive for your system. Jumper settings can also be accessed online
from our web site at www.seagate.com.
Master or single drive: Use the options jumper block shown in Figure 1 to
Momentus 5400.3 Blade Server Installation Guide
configure the drive for operation. This jumper block is the 4-pin header
ST9160821AB, ST9120822AB, ST9100828AB, ST980815AB,
adjacent to pins 1 and 2 of the I/O signal pins

ملخص المحتوى في الصفحة رقم 2

Note. If these tips do not answer your question or solve the problem, con- Configuring the BIOS tact your dealer or visit http://seatools.seagate.com to download After completing the drive installation, restart your blade server according SeaTools™ disc diagnostics software and more troubleshooting to your system documentation. Your blade server may automatically detect advice. your new drive. If your server does not automatically detect your new drive, follow the steps below. 1. Restart your bl