ملخص المحتوى في الصفحة رقم 1
Introduction Hardware Setup BIOS Setup Driver & Utility CD Appendix
Intel Socket 478 (Core Duo)
Micro ATX Motherboard
iL-90MV
Intel ViiV Technology Certified
Intel 945GT/ICH7m-DH
Intel GMA 950
Motherboard
Intel Socket 478 HDMI 1.2 Technology
(Core Duo)
RoHS Compliant
7.1Ch HD Audio
Intel 82573L GbE LAN
User’s Manual
ملخص المحتوى في الصفحة رقم 2
iL-90MV User’s Manual nd English, 2 Edition August, 2006 Copyright and Warranty Notice The information in this document is subject to change without notice and does not represent a commitment on part of the vendor, who assumes no liability or responsibility for any errors that may appear in this manual. No warranty or representation, either expressed or implied, is made with respect to the quality, accuracy or fitness for any particular part of this document. In no event s
ملخص المحتوى في الصفحة رقم 3
Introduction Hardware Setup BIOS Setup Driver & Utility CD Appendix Contents 1. Introduction..................................................................... 1-1 1.1 Features & Specifications .............................................................1-1 1.2 Motherboard Layout.....................................................................1-3 2. Hardware Setup ............................................................... 2-1 2.1 Choosing a Computer Chassis...............
ملخص المحتوى في الصفحة رقم 4
3.6 PnP/PCI Configurations ..............................................................3-20 3.7 PC Health Status........................................................................3-22 3.8 Load Fail-Safe Defaults ..............................................................3-24 3.9 Load Optimized Defaults ............................................................3-24 3.10 Set Password...........................................................................3-24 3.11 Save & Exit
ملخص المحتوى في الصفحة رقم 5
Introduction 1. Introduction 1.1 Features & Specifications CPU ® Designed for Intel Core Duo/Solo, Core 2 Duo socket 478 processors with 667/533MHz FSB ® Supports Enhanced Intel Speedstep Technology (EIST) ® Supports Intel Extended Memory 64 Technology (EM64T) ® Supports Intel Execute Disable Bit capability Chipset ® Northbridge: Intel 945GT ® Southbridge: Intel ICH7m-DH Memory Two 240-pin DIMM slots Supports Dual Channel DDR2 667/533 Un-buffered Non-ECC memory
ملخص المحتوى في الصفحة رقم 6
1x FP-Audio header 1x CD-IN connector Rear Panel I/O 1x VGA connector 1x PS/2 Keyboard connector 1x PS/2 Mouse connector 1x HDMI 1.2 connector 1x OPT-IN1 connector 1x OPT-OUT1 connector 1x AUDIO Connector (Surround-Left / Surround-Right, Rear-Left / Rear-Right, Center/Subwoofer, Mic-In, Line-In, Line-Out) 1x IEEE 1394 connector 4x USB 2.0 connectors 1x RJ-45 Gigabit LAN connector Serial ATA Supports 2 Ports Serial ATA at 1.5Gb/s data transfer rate
ملخص المحتوى في الصفحة رقم 7
Introduction 1.2 Motherboard Layout iL-90MV 1-3
ملخص المحتوى في الصفحة رقم 8
1-4 iL-90MV
ملخص المحتوى في الصفحة رقم 9
Hardware Setup 2. Hardware Setup In this chapter we will elaborate all the information you need upon installing this motherboard to your computer system. ※ Always power off the computer and unplug the AC power cord before adding or removing any peripheral or component. Failing to so may cause severe damage to your motherboard and/or peripherals. Plug in the AC power cord only after you have carefully checked everything. 2.1 Choosing a Computer Chassis This motherboard carries a Mic
ملخص المحتوى في الصفحة رقم 10
To install this motherboard: 1. Locate all the screw holes on the motherboard and the chassis base. 2. Place all the studs or spacers needed on the chassis base and have them tightened. 3. Face the motherboard’s I/O ports toward the chassis’s rear panel. 4. Line up all the motherboard’s screw holes with those studs or spacers on the chassis. 5. Install the motherboard with screws and have them tightened. ※ To prevent shorting the PCB circuit, please REMOVE the metal studs or spacers
ملخص المحتوى في الصفحة رقم 11
Hardware Setup 2.3.1 CMOS Memory Clearing Header and Backup Battery The time to clear the CMOS memory occurs when (a) the CMOS data becomes corrupted, (b) you forgot the supervisor or user password preset in the BIOS menu, (c) you are unable to boot-up the system because the CPU ratio/clock was incorrectly set in the BIOS menu, or (d) whenever there is modification on the CPU or memory modules. This header uses a jumper cap to clear the CMOS memory and have it reconfigured to the defau
ملخص المحتوى في الصفحة رقم 12
CMOS Backup Battery: An onboard battery saves the CMOS memory to keep the BIOS information stays on even after disconnected your system with power source. Nevertheless, this backup battery exhausts after some five years. Once the error message like “CMOS BATTERY HAS FAILED” or “CMOS checksum error” displays on monitor, this backup battery is no longer functional and has to be renewed. To renew the backup battery: 1. Power off the system and disconnect with AC power source. 2. Re
ملخص المحتوى في الصفحة رقم 13
Hardware Setup 2.3.2 Wake-up Headers These headers use a jumper cap to enable/disable the wake-up function. USB-PWR1: Pin 1-2 shorted (default): Disable wake-up function support at USB1 port. Pin 2-3 shorted: Enable wake-up function support at USB1 port. USB-PWR2: Pin 1-2 shorted (default): Disable wake-up function support at USB2 port. Pin 2-3 shorted: Enable wake-up function support at USB2 port iL-90MV 2-5
ملخص المحتوى في الصفحة رقم 14
2.4 Connecting Chassis Components 2.4.1 ATX Power Connectors These connectors provide the connection from an ATX power supply. As the plugs from the power supply fit in only one orientation, find the correct one and push firmly down into these connectors. ATX 24-Pin Power Connector: The power supply with 20-pin or 24-pin cables can both be connected to this 24-pin connector. Connect from pin-1 for either type. However, a 20-pin power supply may cause the system unstable or even un
ملخص المحتوى في الصفحة رقم 15
Hardware Setup 2.4.2 Front Panel Switches & Indicators Headers This header is used for connecting switches and LED indicators on the chassis front panel. Watch the power LED pin position and orientation. The mark “+” align to the pin in the figure below stands for positive polarity for the LED connection. Please pay attention to connect these headers. A wrong orientation will only cause the LED not lighting, but a wrong connection of the switches could cause system malfunction.
ملخص المحتوى في الصفحة رقم 16
2.4.3 FAN Power Connectors These connectors each provide power to the cooling fans installed in your system. CPUFAN1: CPU Fan Power Connector SYSFAN1: System Fan Power Connector AUXFAN1~2: Auxiliary Fan Power Connector ※ These fan connectors are not jumpers. DO NOT place jumper caps on these connectors. 2-8 iL-90MV
ملخص المحتوى في الصفحة رقم 17
Hardware Setup 2.5 Installing Hardware ※ DO NOT scratch the motherboard when installing hardware. An accidentally scratch of a tiny surface-mount component may seriously damage the motherboard. 2.5.1 CPU Socket 478 (Core Duo) ※ Be cautious when installing CPU into this socket. Prevent the contact pins of the socket and the CPU from breaking or bending. 1. Use a flat-head screwdriver to turn the screw bolt counter clockwise to unlock position. 2. Carefully hold the CPU by both of
ملخص المحتوى في الصفحة رقم 18
4. Peel off the protective film from the retention module. This will expose the adhesive sponge. 5. Face the retention module with the side of adhesive sponge toward the bottom side of the motherboard. Align the four screw holes from the retention module through the motherboard. 6. Peel off the protecting film that was originally attached to the bottom of CPU heatsink. This film prevents the thermal paste from being touched by anything but the CPU die, and so it has to be remo
ملخص المحتوى في الصفحة رقم 19
Hardware Setup 7. Carefully place the heatsink onto CPU socket in the direction of blowing its airflow toward rear panel. Use a cross-head screw driver to lock the four screws around the heatsink. 8. Lock the screws diagonally in the order of (1) (2) (3) (4). Turn the screw halfway down the screw hole. Do not over-tighten the screw all the way down into the screw hole one at a time. Avoid CPU damage caused by unbalanced forcing. 9. Plug the fan power connector from
ملخص المحتوى في الصفحة رقم 20
2.5.2 DDR2 Memory Slots This motherboard provides two 240-pin DIMM slots for Dual Channel DDR2 667/533 memory modules with memory expansion size up to 2GB. ※ To reach the optimum performance in dual-channel configurations, install DDR DIMM pairs at the same density, DRAM technology and bus width for both slots. To install system memory: 1. Power off the computer and unplug the AC power cord before installing or removing memory modules. 2. Locate the DIMM slot on the board. 3. Hol
