Antec Sonata III 500 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

Sonata III 500
User’s Manual
Manuel de l’utilisateur
Anwenderhandbuch
Manuale per l’operatore
Manual del usuario

ملخص المحتوى في الصفحة رقم 2

At Antec, we continually refine and improve our products to ensure the highest quality. As such it’s possible that your new case may differ slightly from the descriptions in this manual. This isn’t a problem; it’s simply an improvement. As of the date of publication, all features, descriptions, and illustrations in this manual are correct. Disclaimer This manual is intended only as a guide for Antec’s Computer Enclosures. For more comprehensive instructions on installing the motherboard an

ملخص المحتوى في الصفحة رقم 3

INSTALLING THE MOTHERBOARD This manual does not cover CPU, RAM, or expansion card installation. Please consult your motherboard manual for specific mounting instructions and troubleshooting. 1. Lay the case down, with the open side facing up. The drive cages and power supply should be visible. 2. Make sure you have the correct I/O panel for your motherboard. If the panel provided with the case isn’t suitable, please contact your motherboard manufacturer for the correct I/O panel. 3. Line up

ملخص المحتوى في الصفحة رقم 4

Motherboard Pin Layout 12 Pin Signal Names Pin Signal Names USB Power 1 USB Power 2 1 2 3 Negative Signal 1 4 Negative Signal 2 Positive Signal 1 Positive Signal 2 5 6 Ground 1 Ground 2 7 8 Key (No Connection) Empty Pin 9 10 9 10 CONNECTING THE eSATA PORT This case comes with an eSATA port in the front of the case to connect to your external SATA devices. You will find a SATA connector on a cable attached to the front eSATA port. Connect it to a SATA connector on your motherboard. CONNECTING

ملخص المحتوى في الصفحة رقم 5

3. Slide and lock the drive tray back into the case. 4. Find a small 4-pin power connector on the power supply and connect it to the male 4-pin connector on the device. There are 4 internal drive bays right under the external 3.5” drive bays for hard drives. Each comes with an individual drive tray which mounts through the open side panel of the case. 1. Squeeze the metal clips on each side of the tray and slide the tray out. 2. Mount your hard drive or other internal 3.5” device into t

ملخص المحتوى في الصفحة رقم 6

Specifications: Size: 120 x 120 x 25.4 mm Rated Voltage: DC 12V Operating Voltage: 10.2V ~ 13.8V Speed Input Air Flow Static Acoustical Input Noise Current Pressure Power High 0.24A 2.24 m³ / min 2.54 mm-H O 30 dBA 2.9 W 2 2000 RPM (Max.) (79 CFM) (0.10 inch-H O) 2 Medium 0.2A 1.59 m³ / min 1.53 mm-H O 28 dBA 2.4 W 2 1600 RPM (56 CFM) (0.06 inch-H O) 2 Low 0.13A 1.1 m³ / min 0.92 mm-H O 25 dBA 1.6 W 2 1200 RPM (39 CFM) (0.04 inch-H O) 2 The Front 120mm Fan This case comes with one optional 120mm

ملخص المحتوى في الصفحة رقم 7

Antec, Inc. 47900 Fremont Blvd. Fremont, CA 94538 USA tel: 510-770-1200 fax: 510-770-1288 Antec Europe B.V. Stuttgartstraat 12 3047 AS Rotterdam The Netherlands tel: +31 (0) 10 462-2060 fax: +31 (0) 10 437-1752 Customer Support: US & Canada 1-800-22ANTEC customersupport@antec.com Europe +31 (0) 10 462-2060 europe.techsupport@antec.com www.antec.com © Copyright 2007 Antec, Inc. All rights reserved. All trademarks are the property of their respective owners. Reproduction in whole or in part withou