APC Smart-Ups 5000va Tower SUA5000RMT5U دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

Installation Guide Smart-UPS I/O Hardwire Kit
Package Contents
Safety Information - read these instructions before hardwiring the UPS
Wiring must be performed by qualified electrical personnel.
Adhere to all national and local electrical codes when wiring this unit.
Terminal block
1. Disconnect equipment connected to the UPS. Terminal block label
NOTE: Model 5000RM5U has four internal batteries. The two front batteries must be
disconnected. Screws for securing terminal block to UPS
2. Press the

ملخص المحتوى في الصفحة رقم 2

Installation Guide Smart-UPS I/O Hardwire Kit 2200/3000 Tower 100/120/230 V models The AC input/output panels on the 2200/3000 VA tower units vary in appearance. The hardwire panels and hardwiring configurations for the 2200/3000 VA tower units are identical. NOTE: The input and output cables may be Secure the hardwire input and output panels Secure the terminal block and label to the Remove the five screws that secure the PDU/IO panels connected to the terminal block prior to (supplied), to t

ملخص المحتوى في الصفحة رقم 3

Installation Guide Smart-UPS I/O Hardwire Kit 2200/3000XL 120/208/230 V models The PDU and AC input/output panels on the 2200/3000 VA rack-mount units vary in appearance. The hardwire panels and hardwiring configurations for the 2200/3000 VA rack-mount units are identical. Remove the screws that secure the PDU panel to the UPS. Secure the hardwire input panel (supplied), to Remove the screws that secure the I/O panel to the Secure the terminal block and label to the UPS as shown in the NOTE: T

ملخص المحتوى في الصفحة رقم 4

Installation Guide Smart-UPS I/O Hardwire Kit 5000RM5U 208/230 V models 208 V model: Secure the hardwire input and output panels (supplied), to the UPS using the four screws removed Remove the six screws that secure the PDU/IO 230 V model: Secure the terminal block and label to the UPS as shown in the from the PDU/IO panel. panel to the UPS. diagram, using two screws (supplied). Remove the eight screws that secure the PDU/I panel to the UPS. Remove the two screws that Install appropriate st