Extron electronic sDECORA TX/RX دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

USB Extenders • Setup Guide
This guide provides basic instructions for an experienced technician to install and operate
the Extron USB Extenders.
®
The USB Extender Series includes the USB Extender Tx/Rx, AAP Tx/Rx, and Decora Tx/Rx. They are USB transmitter and
receiver pairs that extend the usable distance of USB 1.0, 1.1, and 2.0 standards with data transfer rates up to 480 Mbp and
data transmission up to 450 ft (135 m) with standard Category 5/5e/6/6e/7 cable.
The rack mountable Tx/Rx,

ملخص المحتوى في الصفحة رقم 2

Apply Power to the USB Extenders 1. Connect the external power supply to the receiver. The power LED ( ) on the receiver lights when power is applied. a 2. Connect power to the transmitter depending upon the power source. z If using an external supply the power LED ( ) of the transmitter lights when power is properly applied. The Link a LED ( ) on both the transmitter and receiver also lights to indicate proper link cable connection, or b z If using a computer USB port to power the transmitt