ملخص المحتوى في الصفحة رقم 1
PRIMERGY
System Board D2630
for RX600 S3 SAS
Technical manual
E. Hübner-Hatzel
Fujitsu SiemensComputers GmbH Paderborn
33094 Paderborn
e-mail: email: manuals@fujitsu-siemens.com
Tel.: 05251 / 14888-13
Fax: (++49) 700 / 372 00001
D2630 (RX600 S3) SAS
Sprachen: En
Edition January 2007
ملخص المحتوى في الصفحة رقم 2
Comments… Suggestions… Corrections… The User Documentation Department would like to know your opinion of this manual. Your feedback helps us optimize our documentation to suit your individual needs. Fax forms for sending us your comments are included in the back of the manual. There you will also find the addresses of the relevant User Documentation Department. Certified documentation according to DIN EN ISO 9001:2000 To ensure a consistently high quality standard and user-friendliness, this d
ملخص المحتوى في الصفحة رقم 3
Contents 1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 2 Important notes . . . . . . . . . . . . . . . . . . . . . . . . . 3 2.1 Notes on safety . . . . . . . . . . . . . . . . . . . . . . . . . 3 2.2 CE Certificate . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 2.3 Environment Protection . . . . . . . . . . . . . . . . . . . . . 7 3 Feature
ملخص المحتوى في الصفحة رقم 4
ملخص المحتوى في الصفحة رقم 5
1Introduction This technical manual describes the system board D2630, which can be ® equipped with up to four Intel processors. Further information about drivers is provided in the readme files on the supplied ServerSupport or ServerStart CDs. You will find further information in the manual "D2630 Setup Utility". Notational conventions The meanings of the symbols and fonts used in this manual are as follows: italics indicates commands, menu items, file and path names or software programs fixe
ملخص المحتوى في الصفحة رقم 6
ملخص المحتوى في الصفحة رقم 7
2 Important notes In this chapter you will find essential information regarding safety when working with the system board. V CAUTION! With the system board installed you must open the system to access the system board. How to dismantle and reassemble the system is described in the Options Guide accompanying your system. 2.1 Notes on safety V CAUTION! ● The actions described in these instructions should only be performed by authorized, qualified personnel. Equipment repairs should only be pe
ملخص المحتوى في الصفحة رقم 8
Notes on safety Important notes V ● Components can become very hot during operation. Ensure you do not touch components when making extensions to the system board. There is a danger of burns! ● Transmisson lines to peripheral devices must be adequately shielded. ● To the LAN wiring the requirements apply in accordance with the standards EN 50173 and EN 50174-1/2. As minimum requirement the use of a protected LAN line of category 5 for 10/100 MBps Ethernet, and/or of category 5e for Gigabit
ملخص المحتوى في الصفحة رقم 9
Important notes Notes on safety Modules with electrostatic-sensitive components Systems and components that might be damaged by electrostatic discharge (ESD) are marked with the following label: Figure 1: ESD label When you handle components fitted with ESDs, you must observe the following points under all circumstances: ● You must always discharge yourself of static charges (e.g. by touching a grounded object) before working. ● The equipment and tools you use must be free of static charges.
ملخص المحتوى في الصفحة رقم 10
CE Certificate Important notes Notes about boards ● During installation/deinstallation of the system board, observe the specific instructions described in the service manual for the server. ● Remove the plug from the mains outlet so that system and system board are totally disconnected from the mains voltage. ● To prevent damage to the system board, the components and conductors on it, please take great care when you insert or remove boards. Take great care to ensure that extension boards ar
ملخص المحتوى في الصفحة رقم 11
Important notes Environment Protection 2.3 Environment Protection Environmentally-friendly product design and development This product has been designed in accordance with the Fujitsu Siemens Computers standard for “environmentally friendly product design and devel- opment”. This means that key factors such as durability, selection and labeling of materials, emissions, packaging, ease of disassembly and recycling have been taken into account. This saves resources and thus reduces the harm don
ملخص المحتوى في الصفحة رقم 12
Environment Protection Important notes Returning used electrical and electronic devices in EU countries – Separate collection Users of electrical and electronic devices are obligated to collect used devices separately. Electrical (electronic) used devices may not be disposed of together with unsorted household refuse. The separate collection is a condition for reuse, recycling and utilisation of used electrical (electronic) devices, which ensures the protection of resources. – Return and col
ملخص المحتوى في الصفحة رقم 13
Important notes Environment Protection Returning batteries Batteries which are marked with one of the following symbols may not be disposed of together with household refuse according to the applicable EU directive. Figure 3: Symbols for batteries With batteries containing harmful substances, the chemical symbol for the heavy metal contained is indicated below the waste bin. Cd Cadmium Hg Mercury Pb Lead The following applies to Germany: – Private consumers can return batteries at the point
ملخص المحتوى في الصفحة رقم 14
ملخص المحتوى في الصفحة رقم 15
3 Features 3.1 Overview System board ® ● Up to four Intel XEON MP dual-core processors ® ● Intel E8501 chipset: ® – Intel E8501 chipset Northbridge (TNB): has two shared 64-bit FSB interfaces configured for symmetric multiprocessing. – External Memory Board (XMB): provides support for DDR-2 memory. – PXH: provides support for PCI-X . ® ® – Intel IOP333 I/O processor with Intel XScale Microarchitecture: ® provides support for PCI-X and contains Intel XScale technology to support RoMB (RAID on
ملخص المحتوى في الصفحة رقم 16
Overview Features ● USB 2.0 support: – Two ports at the rear of the chassis – Three ports at the front of the chassis – One port onboard Main memory – Up to 4 hot-plug memory boards with each 4 slots for main memory PC2- 3200 DDRII/400 MHz, DIMM memory modules with 1 Gbyte, 2 Gbyte and 4 Gbyte – Maximum 64 Gbyte of memory – Memory mirroring function or memory RAID – Optional hot-spare memory function – Single Device Data Correction (SDDC) function (Chipkill™) External connectors – Front side (f
ملخص المحتوى في الصفحة رقم 17
Features Overview ® – Intel RoMB BIOS – LSI SCSI BIOS – SATA support – USB keyboard/mouse – boot possible from: – CD/DVD-ROM – USB drive –LAN – hard disk – console redirection support – OEM logo – CPU, Memory disable – memory mirroring/RAID/spare support Environmental protection Battery in holder Form factor 16.4“ x 18.3“ D2630 (RX600 S3) SAS 13
ملخص المحتوى في الصفحة رقم 18
Main memory Features 3.2 Main memory The system board offers four slots for hot-plug memory boards. Each memory board can be equipped with up to four memory modules (in two memory banks). The slots for main memory can be populated with 1 Gbyte, 2 Gbyte or 4 Gbyte DDR II/400 MHz DIMM memory modules. The maximum memory is 64 Gbyte. ECC with memory scrubbing and with the Single Device Data Correction (SDDC) function is supported. I You will find the descriptions how to install a memory board in
ملخص المحتوى في الصفحة رقم 19
Features PCI bus 3.3 PCI bus 1 2 3 4 5 6 7 Figure 5: PCI slots PCI slots The following table shows an overview of the PCI slots: PCI slot Transfer rate Description Hot-plug 1 PCI-Express x8 slot yes 2500 Mbyte/s 2 PCI-X bus slot (133 MHz) yes 1064 Mbyte/s 3 1250 Mbyte/s PCI-Express x4 slot yes 4 PCI-Express x4 slot yes 1250 Mbyte/s 5 PCI-Express x4 slot yes 1250 Mbyte/s 6 800 Mbyte/s PCI-X bus slot (100MHz) no 7 PCI-X bus slot (100MHz) no 800 Mbyte/s Assignment of the PCI interrupts The PCI inte
ملخص المحتوى في الصفحة رقم 20
Screen resolution Features 3.4 Screen resolution Depending on the operating system used the screen resolutions in the following table refer to the screen controller on the system board. If you are using an external screen controller, you will find details of supported screen resolutions in the operating manual or technical manual supplied with the controller. Screen resolution Refresh rate Digital Display Max. number of colours (Hz) (Hz) 640x480 200 75 16,7 Mio. 800x600 200 75 16,7 Mio. 1024x
