SECO-LARM USA ENFORCER EVT-RBP-GNCQ* دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

ENFORCER VGA BALUN ENFORCER VGA BALUN
Installation Manual
®
Trouble Shooting:
Possible Cause Possible Solution
Problem
ENFORCER
a. Strong electromagnetic a. Move the cable away from possible sources of
Wavy or ghost image if
interference. interference.
connected to image processor
b. Split pairs. b. Ensure same twisted pair connects to balun at both ends
(e.g., multiplexer or DVR), but Passive VGA Baluns
of cable.
c. Crimped cable.
not if directly to monitor?
c. Replace cable with new cable.
EVT

ملخص المحتوى في الصفحة رقم 2

ENFORCER VGA BALUN ENFORCER VGA BALUN Figure 7: Installation: Dimensions 1. Make sure to use shielded twisted pair (STP) cable terminated with shielded RJ-45 connectors. This will ensure 1 2 / " good signal levels between the various video components. 8 6" (55mm) (152mm) 2. Since Cat 5 does not have sufficient lines to support VGA handshaking and control signals, it will be necessary to configure the monitor settings before installing the baluns: To configure the monitor, connect it to the PC (