Video Products RJ45-5EWTP-QR-PCB دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

VIDEO Aurora,Ohio 44202
1275 Danner Drive
Tel: 330-562-2622
Fax: 330-562-1999
PRODUCTS
www.vpi.us
VPI INCORPORATED



Weatherproof Cable Shield Assembly Procedure
For Outdoor CAT5/5e/6/6a Shielded Cable Installations


The Weatherproof Cable Shield is a water-tight cable restraint to be applied to
shielded Cat5/5e/6/6a cable to make a weatherproof cable connection to outdoor enclosures.
To make sure the connection is waterproof upon completion, follow the steps below.



1. I

ملخص المحتوى في الصفحة رقم 2

4. Set the RJ45 connector into the housing such that the snap handle is in the notch. Snap handle 5. Make certain that the seal ring is fully-seated into the housing. THIS STEP IS EXTREMELY IMPORTANT TO ENSURE A WATER-TIGHT SEAL! Seal ring fully-seated Seal ring fully-seated 6. Plug the assembly into the socket on the enclosure and secure the screw nut. Then apply the sealing nut and securely tighten.