Renesas Ethernet & USB Application Board دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

This product is designed to be used with a suitable Renesas Starter Kit. The software for both this
application board and the RSK board should be installed.

1. Installation

Do not connect the E10A to the host PC until the software support has been installed.
1. Insert the CD into your computer’s CD-ROM drive. The CD should automatically run the installation program. If the installer does not start, browse to the CD root folder and double
click on

ملخص المحتوى في الصفحة رقم 2

4. Connection 17. Now connect the E10A to the correct connector on the RSK using the ribbon cable. 18. Connect the E10A debugger to a spare USB port on the PC. 19. The ‘Found New Hardware’ Wizard will appear. Please follow the steps below to install the drivers. Note that administrator privileges are required for a Windows™ 2000/XP machine. 20. Verify the “Recommended” option is selected and click . 21. If using Windows XP, skip to step 23; otherwise click . 22. Click t