ملخص المحتوى في الصفحة رقم 1
SyncMaster XL30
ملخص المحتوى في الصفحة رقم 2
SyncMaster XL30 Model Notational Failure to follow directions noted by this symbol could result in bodily harm or damage to the equipment. Prohibited Important to read and understand at all times Do not disassemble Disconnect the plug from the outlet Do not touch Ground to prevent an electric shock Power When not used for an extended period of time, set your computer to DPM. If using a screen saver, set it to active screen mode. The image
ملخص المحتوى في الصفحة رقم 3
Do not use a damaged or loose plug. This may cause electric shock or fire. Do not pull the plug out by the wire nor touch the plug with wet hands. This may cause electric shock or fire. Use only a properly grounded plug and receptacle. An improper ground may cause electric shock or equipment damage. (Class l Equipment only.) Insert the power plug firmly so that it does not come loose. A bad connection may cause fire. Do not excessively bend the
ملخص المحتوى في الصفحة رقم 4
This may cause electric shock or fire. Installation Be sure to contact an authorized Service Center, when installing your monitor in a location with heavy dust, high or low temperatures, high humidity, and exposed to chemical substances and where it operates for 24 hours such as at airports, train stations etc. Failure to do so may cause serious damage to your monitor. Place your monitor in a location with low humidity and a minimum of dust. Failure to do so m
ملخص المحتوى في الصفحة رقم 5
Keep any heating devices away from the power cable. A melted coating may cause electric shock or fire. Do not install the product in places with poor ventilation, for instance, a bookshelf, closet, etc. Any increase in the internal temperature may cause fire. Put down the monitor carefully. Failing to do so may damage the monitor. Do not place the monitor face down. This may damage the TFT-LCD surface. The installation of the bracket must be done by a qualifi
ملخص المحتوى في الصفحة رقم 6
a slightly moistened, soft fabric. Do not spray water or detergent directly onto the monitor. This may cause damage, electric shock or fire. Use the recommended detergent with a smooth cloth. If the connector between the plug and the pin is dusty or dirty, clean it properly using a dry cloth. A dirty connector may cause electric shock or fire. Make sure to unplug the power cord before cleaning the product. Otherwise, this may cause electric shock or fire. Unpl
ملخص المحتوى في الصفحة رقم 7
do not install inside a vehicle. This may cause a malfunction, electric shock or fire. In particular, avoid operating the monitor near water or outdoors where the monitor could be exposed to snow or rain. If the monitor is dropped or the casing is damaged, turn the monitor off and unplug the power cord. Then contact a Service Center . The monitor may malfunction, causing electric shock or fire. Disconnect the plug from the outlet during storms or lightning or if it is not u
ملخص المحتوى في الصفحة رقم 8
Do not insert metal objects such as chopsticks, wire and tools or inflammable objects such as paper or matches into the vent, headphone port or AV ports or etc. This may cause electric shock or fire. If an alien substances or water enters the product, turn the product off, unplug the power connector from the wall outlet and contact the Service Center. When viewing a fixed screen for an extended period of time, residual image or blurriness may appear. Change the mode to energy
ملخص المحتوى في الصفحة رقم 9
Otherwise, this may cause heat emission from the accumulated dirt or degraded insulation, causing electric shock or fire. Do not place your children's favorite toys or any other objects of interest on the product. Children may try to climb on the product to retrieve an object. The product could fall, causing injury or even fatality. When lifting up or moving the monitor, do not lift the monitor upside down while holding only the stand. This may cause your monitor to fall, and
ملخص المحتوى في الصفحة رقم 10
SyncMaster XL30 Model Please make sure the following items are included with your monitor. If any items are missing, contact your dealer. Contact a local dealer to buy optional items. Unpacking With Stand Without Stand (Monitor & Sliding Stand) Manual Warranty Card User's Guide, Quick Setup Guide (Not available in all Monitor Driver locations) Cable
ملخص المحتوى في الصفحة رقم 11
DVI-D (Dual link) Cable Power Cord Sold separately USB Cable (A-B Type cable) Others Calibrater For more information on the use of the calibrater, see Natural Color Expert Help. Hood Front
ملخص المحتوى في الصفحة رقم 12
MODE button Press this button to select a Color Mode. Continuing to press the (= Color Mode) button, will repeatedly display the setting modes. With the control buttons at the front of the monitor, you can easily implement different color information matching your environment. - Although the values are carefully chosen by our 1) Custom engineers, the pre-configured values may not be comfortable to your eyes depending on your taste. If this is the case, adjust the brightness a
ملخص المحتوى في الصفحة رقم 13
Adjust buttons [ Push the button to adjust brightness. ] ▼ : The screen is getting dark. ▲ : The screen is getting bright. Use this button for turning the monitor on and off. / Power button [ ] / This light glows blue during normal operation, and blinks blue once Power indicator as the monitor saves your adjustments. See PowerSaver described in the manual for further information regarding power saving functions. For energy conservation, turn your monitor OFF when it is not needed,
ملخص المحتوى في الصفحة رقم 14
Stand Stopper Remove the fixing pin on the stand to lift the monitor up and down. POWER 1. POWER S/W : Switches the monitor On/Off. 2. POWER : Connect the power cord for your monitor to the POWER on the back of the monitor. Kensington Lock The Kensington lock is a device used to physically fix the system when using dit in a public place. (The locking device has to be purchased separately.) For using a locking device, contact where you purchased it.
ملخص المحتوى في الصفحة رقم 15
SyncMaster XL30 Model Connecting the Monitor Connecting the Monitor Connect the power cord for your monitor to the power port on the back of the monitor. Plug the power cord for the monitor into a nearby outlet. Use a connection appropriate for your computer. Using the DVI (Digital) connector on the video card. Connect the DVI Cable to the DVI-D Port on the back of your Monitor. [ DVI-D ] Connected to a Macintosh. Connect the monitor to the Macintosh compute
ملخص المحتوى في الصفحة رقم 16
disk drive by connecting them to the DOWN port of the monitor without connecting them to the PC. The USB port of the monitor supports High-Speed Certified USB 2.0. High speed Full speed Low speed Data Rate 480 Mbps 12 Mbps 1.5 Mbps 2.5W 2.5W 2.5W Power Consumption (Max., each port) (Max., each port) (Max., each port) Connect the UP port of the monitor and the USB port of the computer with the USB cable. To use DOWN port, you have to connect the UP (Upstream Cable) to the
ملخص المحتوى في الصفحة رقم 17
MP3 player, etc.) You can use other USB devices that can be connected to a computer. When connecting a device to the DOWN port of the monitor, connect the device using a cable appropriate to the device. (For the purchase of the cable and external devices, ask the service center of the corresponding product.) The company is not liable for problems or damages to an external device caused by using an unauthorized cable for the connection. Some products do not follow the USB s
ملخص المحتوى في الصفحة رقم 18
Using ( ),You can swivel the monitor left and right at an angle of 330 ° to set the monitor lengthwise. The rubber under the stand is to avoid the monitor slide. Tilt angle Using ( ), You can adjust the tilt angle forward and backward for the most comfortable viewing angle. Removing the base
ملخص المحتوى في الصفحة رقم 19
1. Turn off your monitor and unplug its power cord. 2. Lay the LCD monitor face-down on a flat surface with a cushion beneath it to protect the screen. 3. Remove four screws ( ) and then remove the Stand from the LCD monitor. Attaching a Base This monitor accepts a 200 mm x 100 mm VESA-compliant mounting interface pad. Monitor Mounting interface pad (Sold separately) 1. Turn off your monitor and unplug its power cord. 2. Lay the LCD monitor face-down on a flat
ملخص المحتوى في الصفحة رقم 20
Insert the hooking parts ( ) of both hoods starting from the top and moving downwards into the grooves ( ) near the left and right edges at the back of the monitor. Fit the top part of the monitor into the top of the grooves of both hoods.
