ملخص المحتوى في الصفحة رقم 1
Dell™ SX2210T Flat Panel Monitor User's Guide
About Your Monitor
Setting Up the Monitor
Operating the Monitor
Troubleshooting
Appendix
Notes, Notices, and Cautions
NOTE: A NOTE indicates important information that helps you make better use of your computer.
NOTICE: A NOTICE indicates either potential damage to hardware or loss of data and tells you how to avoid the problem.
CAUTION: A CAUTION indicates a potential for property damage, personal injury, or death.
Information in this doc
ملخص المحتوى في الصفحة رقم 2
Back to Contents Page About Your Monitor Dell™ SX2210T Flat Panel Monitor User's Guide Package Contents Product Features Identifying Parts and Controls Monitor Specifications Universal Serial Bus (USB) Interface Plug and Play Capability Camera - MIC Specifications Maintenance Guidelines Package Contents Your monitor comes with all the items shown below. Ensure that you have all the items. If something is missing, contact Dell. NOTE: Some items may be optional and may not ship with
ملخص المحتوى في الصفحة رقم 3
l DVI cable l USB up stream cable (enables USB ports, Webcam and touch function on the monitor) l Documentation (Safety Information, Quick Start Guide, and CD) l Cleaning cloth Product Features The SX2210T flat panel display has an active matrix, thin-film transistor (TFT), liquid crystal display (LCD). The monitor features include: ■ 21.5 inches (546.8 mm) diagonal. ■ 1920 X 1080 resolution, plus full-screen support for lower resolutions. ■ Touch sensitive—detects your fi
ملخص المحتوى في الصفحة رقم 4
Front View Label Description Shortcut keys (for more information, see Operating the Monitor) *The default settings are Preset Modes select and Brightness/Contrast select. 1-2 1 Preset Modes select 2 Brightness/Contrast select 3 OSD menu select 4 EXIT 5 Power button (with light indicator) 6 Webcam 7 Microphone Back View Back view Back View with monitor stand Label Description Use 1 Barcode serial number label To contact Dell for technical support. 2 Security lock slot To help secure your
ملخص المحتوى في الصفحة رقم 5
Left view Right view Bottom View Bottom view Label Description 1 DC power cord connector 2 Audio Line-in 3 Audio Line-out 4 HDMI connector 5 DVI connector 6 VGA connector 7 USB upstream connector 8 USB downstream connector Monitor Specifications The following sections give you information about the various power management modes and pin assignments for various connectors of your monitor. Power Management Modes If you have VESA's compliance display card or software installed in you
ملخص المحتوى في الصفحة رقم 6
or Activate the computer and 'wake up' the monitor to gain access to the OSD. NOTE: This monitor is ENERGY STAR®-compliant. Zero power consumption in OFF mode can only be achieved by disconnecting the main cable from the power adapter. Pin Assignments VGA Connector Pin 15-pin Side of the Connected Signal Cable Number 1 Video-Red 2 Video-Green 3 Video-Blue 4 GND 5 Self-test 6 GND-R 7 GND-G 8 GND-B 9 Computer 5V 10 GND-sync 11 GND 12 DDC data 13 H-sync 14 V-sync 15 DDC clock DV
ملخص المحتوى في الصفحة رقم 7
Pin 24-pin Side of the Connected Signal Number Cable 1 TMDS RX2- 2 TMDS RX2+ 3 TMDS Ground 4 Floating 5 Floating 6 DDC Clock 7 DDC Data 8 Floating 9 TMDS RX1- 10 TMDS RX1+ 11 TMDS Ground 12 Floating 13 Floating 14 +5V power 15 Self test 16 Hot Plug Detect 17 TMDS RX0- 18 TMDS RX0+ 19 TMDS Ground 20 Floating 21 Floating 22 TMDS Ground 23 TMDS Clock+ 24 TMDS Clock- HDMI Connector Pin 19-pin Side of the Connected Signal Number Cable 1 T.M.D.S. Data 2- 2 T.M.D.S. Data 2 Shield 3 T.M.D.S. D
ملخص المحتوى في الصفحة رقم 8
13 CEC 14 Reserved (N.C. on device) 15 SCL 16 SDA 17 DDC/CEC Ground 18 +5V Power 19 Hot Plug Detect Universal Serial Bus (USB) Interface This section gives you information about the USB ports that are available on the left side of your monitor. NOTE: This monitor supports High-Speed Certified USB 2.0 interface Transfer speed Data Rate Power Consumption High speed 480 Mbps 2.5W (Max., each port) Full speed 12 Mbps 2.5W (Max., each port) Low speed 1.5 Mbps 2.5W (Max., each port) USB Upst
ملخص المحتوى في الصفحة رقم 9
Lens Field of view 66.2 degree +/- 5 % Focus mode Fixed Focus Focus area 37 cm~Infinity Focusing distance (normal mode) 1.100 mm Image Sensor Active array size 2.0 mega-pixel Video specification 1600 x 1200 (UXGA) - up to 10 frames per second Video frame rate 640 x 480 (VGA) and below - up to 30 frames per second Image flip Horizontally Audio Specification Microphone type Dual Microphone Interface USB 2.0 high Speed System Requirements The following are the minimum system requirements
ملخص المحتوى في الصفحة رقم 10
Touch Screen Specifications Optical touch Touch Technology Touch Method Finger, stylus or any pointer. Stylus Diameter Minimum 7 mm Capabilities Mouse functionality—click, drag, double-click and right-click Resolution 1073 Mpixel +/-2.5 mm over 95% of touchable area (Microsoft Windows 7 Accuracy compliant) Touch Activation Force No pressure required Touch Durability Unlimited Touch Response Time Typical response time 15 ms Glass 2.5 mm chemically toughened glass Resolution Specifications
ملخص المحتوى في الصفحة رقم 11
Electrical Specifications Analog RGB, 0.7 Volts +/- 5%, positive polarity at 75 ohm input impedance Video input signals Digital DVI-D TMDS, HDMI, 600mV for each differential line, positive polarity at 50 ohm input impedance Audio Input and Output signals Input signal level: 1Vrms without chipping Separate horizontal and vertical synchronizations, Synchronization input signals polarity-free TTL level, SOG (Composite SYNC on green) 100 to 240 VAC/50 or 60 Hz + 3 Hz/1.6A (Max.) AC/DC Adapto
ملخص المحتوى في الصفحة رقم 12
Storage: 20% to 80% (non-condensing) Non-operating Shipping: 20% to 80% (non-condensing) Altitude Operating 3,657.60 m (12,000 ft) max Non-operating 12,192 m (40,000 ft) max 222.3 BTU/hour (maximum) Thermal dissipation 188.1 BTU/hour (typical) Maintenance Guidelines Cleaning Your Monitor CAUTION: Read and follow the safety instructions before cleaning the monitor. CAUTION: Before cleaning the monitor, unplug the monitor power cable from the electrical outlet. For best practices, follow t
ملخص المحتوى في الصفحة رقم 13
Back to Contents Page Appendix Dell™ SX2210T Flat Panel Monitor User's Guide Safety Instructions FCC Notice (U.S. Only) and Other Regulatory Information Contacting Dell CAUTION: Safety Instructions CAUTION: Use of controls, adjustments, or procedures other than those specified in this documentation may result in exposure to shock, electrical hazards, and/or mechanical hazards. For information on safety instructions, see the safety information that shipped with your monitor.
ملخص المحتوى في الصفحة رقم 14
Back to Contents Page Setting Up Your Monitor Dell™ SX2210T Flat Panel Monitor If you have a Dell™ desktop or a Dell™ portable computer with internet access 1. Go to http://support.dell.com, enter your service tag, and download the latest driver for your graphics card. 2. After installing the drivers for your graphics Adapter, attempt to set the resolution to 1920 X 1080 again. NOTE: If you are unable to set the resolution to 1920 x 1080, please contact Dell™ to inquire about a graphic
ملخص المحتوى في الصفحة رقم 15
Back to Contents Page Setting Up Your Monitor Dell™ SX2210T Flat Panel Monitor If you have a non Dell™ desktop, portable computer, or graphics card 1. Right-click on the desktop and click Properties. 2. Select the Settings tab. 3. Select Advanced. 4. Identify your graphics controller supplier from the description at the top of the window (e.g. NVIDIA, ATI, Intel etc.). 5. Refer to the graphic card provider website for updated driver (for example, http://www.ATI.com OR http://www.NVIDI
ملخص المحتوى في الصفحة رقم 16
Back to Contents Page Operating the Monitor Dell™ SX2210T Flat Panel Monitor User's Guide Turn On the Monitor Using the Front Panel Controls Using the On-Screen Display (OSD) Menu Setting the Maximum Resolution Using the Dell Soundbar (Optional) Using the Tilt Using the Camera Installing and Using the Facial Recognition Software (FastAccess) Using the Touch Screen Turn On the Monitor Press the button to turn on the monitor Using the Front Pan
ملخص المحتوى في الصفحة رقم 17
Use the Exit button to exit on-screen display (OSD) from menu and sub-menus. Exit Front panel button Use the buttons on the side of the monitor to adjust the image settings. Front panel Button Description A Use the Up button to adjust (increase ranges) items in the OSD menu. Up B Use the Down button to adjust (decrease ranges) items in the OSD menu. Down C Use the OK button to confirm your selection. OK D Use the back button to go back to the main menu. Back
ملخص المحتوى في الصفحة رقم 18
2. Press the and buttons to toggle between options in the Menu. As you move from one icon to another, the option name is highlighted. 3. To select the highlighted item on the menu press the again. 4. Press the and buttons to select the desired parameter. 5. Press the buttons to enter the slide bar and then use the or button, according to the indicators on the menu, to make your changes. 6. Select the to return to previous menu without accepting current settings or to acc
ملخص المحتوى في الصفحة رقم 19
Auto Adjustment allows the monitor to self-adjust to the incoming video signal. After using Auto Adjustment, you can further tune your monitor by using the Pixel Clock (Coarse) and Phase (Fine) controls under Image Settings. NOTE: Auto Adjust does not occur if you press the button while there are no active video input signals or attached cables. Input Source Use the Input Source menu to select different video signals that may be connected to your monitor. Press t
ملخص المحتوى في الصفحة رقم 20
Back Press the button to go back to the main menu. Input Color Format Allows you to set the video input mode to: l RGB: Select this option if your monitor is connected to a computer or DVD player using the HDMI cable or the HDMI to DVI adapter. l YPbPr: Select this option if your DVD player supports only YPbPr output. Mode Selection Allows you to set the display mode to: l Graphics: Select this mode if your monitor is connected to your computer. l Video: Select this mode if y
