Dell UltraScan P992 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

Dell™ P992 Color Monitor
Quick Setup Guide
Safety Instructions
Observe the following safety guidelines when connecting and using your monitor:
• Be sure that your monitor is electrically rated to operate with the AC power available in your location.
• Locate your monitor near an easily accessible electrical outlet.
• Place the monitor on a solid surface and treat it carefully. The screen can be damaged if dropped, sharply hit, or touched
with a sharp or abrasive implement.
• Put your monitor in

ملخص المحتوى في الصفحة رقم 2

Monitor Controls and Indicators 1 These buttons are used to make adjustments to the monitor in the desired menu items. 2 These buttons display the BRIGHT ( ) / CONTRAST ( ) menu. These buttons are also used to navigate the menu. 3 This button is used to display the main menu on your screen. This button is also used to select the menu items and to activate the adjustment. 4 This button switches the power on and off. The LED indicator lights up in green when the monitor is turned on, and lights up

ملخص المحتوى في الصفحة رقم 3

® ® Microsoft Windows 98 Operating System Windows 98 automatically detects the new monitor and displays the Add New Hardware Wizard dialog box if the monitor driver is not already installed. 1. Insert the monitor CD into the CD-ROM drive, and click Next> twice when the Add New Hardware Wizard dialog box appears. 2. Click the CD-ROM drive box to install the drivers from the CD and then click Next>. 3. Confirm that the driver was found on the CD, and click Next> twice to install the driver. 4. Cli

ملخص المحتوى في الصفحة رقم 4

Troubleshooting Tips Monitor Has No Power If the monitor’s power indicator is off and no image appears on the display, perform the following checks: • Ensure that the power cable is fully inserted in the monitor’s power port and the electrical outlet. • Test the electrical outlet by plugging in a working electrical device such as a lamp. • Ensure that the power button has been depressed, and wait for the power indicator to light. • Try another power cable on the monitor. Use the computer’s power