ملخص المحتوى في الصفحة رقم 1
D1901N
18.5" wide LCD Monitor
User Manual
English
Deutsch Svenska
Français
Suomi
Italiano Dansk
Español
Polski
Nederlands
Model: D1901Nc
ModelM
ملخص المحتوى في الصفحة رقم 2
TABLE OF CONTENTS FOR YOUR SAFETY ----------------------------------------------------------- 1 SAFETY PRECAUTIONS ------------------------------------------------ 2 SPECIAL NOTES ON LCD MONITORS ----------------------------- 3 BEFORE YOU OPERATE THE MONITOR ------------------------------- 3 FEATURES ------------------------------------------------------------------ 3 PACKING LIST ------------------------------------------------------------- 3 INSTALLATION INSTRUCTIO
ملخص المحتوى في الصفحة رقم 3
Before operating the monitor, please read this manual thoroughly. This manual should be retained for future reference. FCC Class B Radio Frequency Interference Statement WARNING: (FOR FCC CERTIFIED MODELS) NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment genera
ملخص المحتوى في الصفحة رقم 4
PRECAUTIONS • Do not use the monitor near water, e.g. near a bathtub, washbowl, kitchen sink, laundry tub, swimming pool or in a wet basement. • Do not place the monitor on an unstable cart, stand, or table. If the monitor falls, it can injure a person and cause serious damage to the appliance. Use only a cart or stand recommended by the manufacturer or sold with the monitor. If you mount the monitor on a wall or shelf, use a mounting kit approved by the manufacturer and follow the ki
ملخص المحتوى في الصفحة رقم 5
SPECIAL NOTES ON LCD MONITORS The following symptoms are normal with LCD monitor and do not indicate a problem. NOTES • Due to the nature of the fluorescent light, the screen may flicker during initial use. Turn off the Power Switch and then turn it on again to make sure the flicker disappears. • You may find slightly uneven brightness on the screen depending on the desktop pattern you use. • The LCD screen has effective pixels of 99.99% or more. It may include blemishes of 0.01
ملخص المحتوى في الصفحة رقم 6
INSTALLATION INSTRUCTIONS Install Remove Figure 1 Installing and Removing the Base POWER CORD Power Source: 1. Make sure that the power cord is the correct type required in your area. 2. This LCD monitor has an External universal power supply that allows operation in either 100/120V AC or 220/240V AC voltage area (No user adjustment is required.) 3. Connect the AC-power cord into your LCD monitor’s power input socket, The AC-p
ملخص المحتوى في الصفحة رقم 7
CONTROLS AND CONNECTORS SIGNAL CABLE Connecting the Signal Cable: Plug the Signal Cable one end to LCD monitor’s “DSUB-Input” socket , the other end to the computer’s VGA port and tighten the two screws on the cable connector. Connecting the Power Cord: Plug one end of the AC power cord to the LCD monitor's AC input socket, and the other end to Wall outlet. Caution: If the AC outlet is not grounded (with three holes), install the proper grounding adapter (not supplied). 1 2
ملخص المحتوى في الصفحة رقم 8
ADJUSTING THE VIEWING ANGLE • For optimal viewing it is recommended to look at the full face of the monitor, then adjust the monitor’s angle to your own preference. • Hold the stand so you do not topple the monitor when you change the monitor’s angle. • You are able to adjust the monitor’s angle from -5 ° to 20 °. Figure 3 NOTES • Do not touch the LCD screen when you change the angle. It may cause damage or break the LCD screen. • Careful attention is required no
ملخص المحتوى في الصفحة رقم 9
OPERATING INSTRUCTIONS GENERAL INSTRUCTIONS Press the power button to turn the monitor on or off. The other control buttons are located at front panel of the monitor (See Figure 4). By changing these settings, the picture can be adjusted to your personal preferences. • The power cord should be connected. • Connect the video cable from the monitor to the video card. • Press the power button to turn on the monitor position. The power indicator will light up. 6 5 4 3 2 1
ملخص المحتوى في الصفحة رقم 10
FRONT PANEL CONTROL • Power Button: Press this button to switch ON/OFF of monitor’s power. • Power Indicator: Blue — Power On mode. Orange — Power saving mode. • MENU/ENTER : Active OSD menu or function adjust confirm or Exit OSD menu when in Contrast/Brightness OSD status. • ECO Hotkey(-) Activates the ECO control when the OSD is OFF or navigate through adjustment icons when OSD is ON or adjust a function when function is activated. • Image Ratio(+) : Select mo
ملخص المحتوى في الصفحة رقم 11
• To keep the monitor looking new, clean it with a soft cloth. Stubborn stains may be removed with a cloth lightly dampened with a mild detergent solution. Never use strong solvents such as thinner, benzene, or abrasive cleaners, since these will damage the cabinet. As a safety precaution, always unplug the monitor before cleaning it. • Do not scratch the screen with hard things, it may cause permanent damage. • Don’t leak liquid into monitor which will result in the damage of c
ملخص المحتوى في الصفحة رقم 12
ADJUSTING THE PICTURE The descriptions for function control LEDS Main Main Sub Menu Sub Menu Description Menu Item Item Menu Icon Brightness Backlight Adjustment Contrast Contrast from Digital-register. Standard Standard Mode Text Text Mode Internet Internet Mode Luminance Eco Game Game Mode Movie Movie Mode Sports Sports Mode Off Disable dynamic contrast ratio DCR On Enable dynamic contrast ratio Adjust picture Clock to reduce Clock Vertical-Line noise. Ad
ملخص المحتوى في الصفحة رقم 13
Color Recall Warm Color Temperature Warm Temp. from EEPROM. Recall Normal Color Temperature Normal from EEPROM. Recall Cool Color Temperature Cool from EEPROM. Recall SRGB Color Temperature sRGB from EEPROM. User-B Blue Gain from Digital-register User-G Green Gain Digital-register. User User-R Red Gain from Digital-register the H.Position Adjust verticalposition of OSD OSD Adjust the horizontal position of Setup V.Position OSD Timeout Adjust the OSD Timeout
ملخص المحتوى في الصفحة رقم 14
PLUG AND PLAY Plug & Play DDC2B Feature This monitor is equipped with VESA DDC2B capabilities according to the VESA DDC STANDARD. It allows the monitor to inform the host system of its identity and, depending on the level of DDC used, communicate additional information about its display capabilities. The DDC2B is a bidirectional data channel based on the I²C protocol. The host can request EDID information over the DDC2B channel. THIS MONITOR WILL APPEAR TO BE NON-FUNCTIONAL IF THE
ملخص المحتوى في الصفحة رقم 15
TECHNICAL SUPPORT (FAQ) Problem & Question Possible Solution *Check if the Power Switch is in the ON Power LED is not on position *Power Cord should be connected *Check if the PC system is Plug & Play compatible *Check if the Video Card is Plug & Play No Plug & Play compatible *Check if the D-15 plug pin of Video Cable is bent *Adjust the Contrast and Brightness Picture is fuzzy Controls. Picture bounces or a wave *Move electrical devices that may cause pattern is present in th
ملخص المحتوى في الصفحة رقم 16
CLOCK (pixel frequency) controls the number of pixels scanned by one horizontal sweep. If the frequency is not correct, the screen shows vertical stripes and the picture has not correct width. FOCUS adjusts the phase of the pixel clock signal. With a wrong phase adjustment the picture has horizontal disturbances in light picture. For FOCUS and CLOCK adjustment use “dot-pattern” or win 95/98/2000/ME/XP shut-down mode pattern. ERROR MESSAGE & POSSIBLE SOLUTION CABLE NOT CON
ملخص المحتوى في الصفحة رقم 17
APPENDIX SPECIFICATIONS Driving system TFT Color LCD LCD Panel Size 470 mm(18.5") Pixel pitch 0.3mm( H ) ×0.3mm ( V ) Video R,G,B Analog Interface Input Separate Sync. H/V TTL H-Frequency 31kHz – 83kHz V-Frequency 56-75Hz Display Colors 16.7M Colors Dot Clock 84.75MHz Max. Resolution 1366x768@60Hz TM Plug & Play VESA DDC2B Power Consumption ON Mode ≤25W OFF Mode ≤1W Input Connector D-Sub 15pin Input Video Signal Analog:0.7Vp-p(standard), 75 OHM, Pos
ملخص المحتوى في الصفحة رقم 18
Switch • Power Button • Menu • Image Ratio(+) • ECO/- • Source/Auto External Controls: Functions • Contrast • Brightness • Phase • Clock • H. Position • V. Position • OSD setup • Language • Information • (Warm)Color • (Cool)Color • sRGB • USER Color temperature • Reset • Exit Power Consumption ( Maximum ) 25Watts Regulatory Compliance FCC, UL 16
ملخص المحتوى في الصفحة رقم 19
FACTORY PRESET TIMING TABLE HORIZONTAL VERTICAL STANDARD RESOLUTION FREQUENCY FREQUENCY (kHz) (Hz) 640×480 @60Hz 31.469 59.940 VGA 640×480 @75Hz 37.500 75.000 Dos-mode 720×400 @70Hz 31.469 70.087 800×600 @60Hz 37.879 60.317 SVGA 800×600 @75Hz 46.875 75.000 1024×768 @60Hz 48.363 60.004 XGA 1024×768 @75Hz 60.023 75.029 1366x768@60Hz 47.852 59.964 WXGA CONNECTOR PIN ASSIGNMENT 15 6 10 11 15 15 - Pin Color Display Signal Cable PIN NO. DESCRIPTIO
