ملخص المحتوى في الصفحة رقم 16
Using Your Gateway Flat-Panel Monitor No picture � Make sure that the power cord is connected correctly to both the back of your monitor and the power outlet. For more information about connecting the power cord, see “Connecting power” on page 4. � Make sure that the video cable is connected securely to both the back of your monitor and your computer. For more information about connecting the video cable, see “Connecting video inputs” on page 3. � Make sure that your monitor is turned on. �
ملخص المحتوى في الصفحة رقم 17
www.gateway.com Color is not uniform � Press the Menu button, then press the Auto button to automatically adjust the display image to the ideal settings. � Make sure that your monitor warms up for at least 30 minutes before making a final judgment about color uniformity or brightness. Image is not sized or centered correctly � Press the Menu button, then press the Auto button to automatically adjust the display image to the ideal settings. � Use the position controls to adjust the image. For
ملخص المحتوى في الصفحة رقم 18
Using Your Gateway Flat-Panel Monitor Specifications Specifications are subject to change without notice or obligation. Many products for Gateway and its subsidiaries are custom engineered by our suppliers to Gateway specifications and may vary from similarly marketed products. 19 inches (diagonal) Panel size 19-inch viewable TFT with glare coating Panel type 1440 × 900 (native) Pixel resolution 0.0112 × 0.0112 inches (0.2835 mm × 0.2835 mm) Pixel pitch 16:10 Aspect ratio 2 300 cd/m Brightne
ملخص المحتوى في الصفحة رقم 19
www.gateway.com Video modes Mode Mode name and resolution Horizontal frequency (kHz) Vertical frequency (Hz) 1 VGA 640 × 350 31.469 70.087 2 VGA 640 × 480 31.469 59.941 3 VESA 640 × 480 37.861 72.810 4 VESA 640 × 480 37.500 75.000 5 VGA 720 × 400 31.469 70.087 6 VESA 800 × 600 35.156 56.250 7 VESA 800 × 600 37.879 60.317 8 VESA 800 × 600 48.077 72.188 9 VESA 800 × 600 46.875 75.000 10 VESA 1024 × 768 48.363 60.004 11 VESA 1024 × 768 56.476 70.069 12 VESA 1024 × 768 60.023 75.029 13 VESA 1280 × 1
ملخص المحتوى في الصفحة رقم 20
Using Your Gateway Flat-Panel Monitor 16
ملخص المحتوى في الصفحة رقم 1
HD1900 19-inch Widescreen LCD Monitor
USERGUIDE
®
ملخص المحتوى في الصفحة رقم 2
ملخص المحتوى في الصفحة رقم 3
Contents Using Your Gateway Flat-Panel Monitor. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Connecting your monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Attaching the base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Connecting video inputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Connecting power . . . . .
ملخص المحتوى في الصفحة رقم 4
Contents ii
ملخص المحتوى في الصفحة رقم 5
Using Your Gateway Flat-Panel Monitor • Connecting your monitor � Starting your monitor � Adjusting monitor settings � Changing Windows screen settings � Power management � Maintaining � Troubleshooting � Specifications 1
ملخص المحتوى في الصفحة رقم 6
Using Your Gateway Flat-Panel Monitor Connecting your monitor To set up your monitor, first unpack the box, unwrap the components, attach the base, then make your cable connections. Attaching the base To attach the base: • Place the monitor base on a table top, then slide the monitor neck down onto the base until it clicks into place. You may need to press the button on the base to let the monitor slide on smoothly. 2
ملخص المحتوى في الصفحة رقم 7
www.gateway.com Connecting video inputs To connect video sources to your monitor: 1 Position your computer and your monitor so you can reach the back of each. 2 If your computer has a digital video connector (DVI), connect a DVI video cable (not included) to the white connector on the display. - OR - Connect the blue VGA video cable to the blue connector on the display. 3 Make sure that your computer is turned off, then connect the other end of the video cable to the matching video port on th
ملخص المحتوى في الصفحة رقم 8
Using Your Gateway Flat-Panel Monitor Connecting power To connect power: 1 Position your monitor so you can reach the back, then connect the power cord to the power connector under the back of your monitor. 2 Plug the power cord into a correctly grounded power outlet. We recommend using a surge protector to protect your monitor from voltage spikes. Connecting a security cable You can secure your monitor to your computer desk (or to another heavy object) with a cable lock. To connect a cable
ملخص المحتوى في الصفحة رقم 9
www.gateway.com Starting your monitor To start your monitor: 1 Press the (power) button on the side of your monitor. The power LED in front of the power button turns on. Power button 2 Turn on your computer. After your computer is running, the power LED on your monitor’s power button should be blue. Allow about 10 seconds for the display image to appear. If the power LED is not blue or you do not see a display image, check the connections. For more troubleshooting information, see “Troubles
ملخص المحتوى في الصفحة رقم 10
Using Your Gateway Flat-Panel Monitor Adjusting monitor settings Use your monitor controls (located on your monitor itself) and computer controls (accessible through Windows) to adjust the display image. For more information about computer controls, see “Changing Windows screen settings” on page 10. Using the monitor buttons This monitor features an on-screen display (OSD) that lets you adjust contrast, brightness, and other settings for your monitor. Your monitor saves changes you make to th
ملخص المحتوى في الصفحة رقم 11
www.gateway.com On-screen display options Adjusting OSD settings To adjust the OSD settings: Tip While the OSD is active, on-screen labels appear next to the buttons to help you identify them. 1 Press the Auto button. The display image is automatically adjusted to the ideal settings for your current screen resolution. 2 Press the Menu button. The OSD opens. 3 Press the / (brightness) or / (contrast) button to highlight a setting, then press the Auto button to open the selected menu or settin
ملخص المحتوى في الصفحة رقم 12
Using Your Gateway Flat-Panel Monitor OSD menus OSD Menu Description Auto—Automatically adjusts your monitor to its optimum Main menu settings. Picture—Opens the Picture menu, where you can adjust brightness, contrast, gamma, and video scaling. Main Menu Geometry—Opens the Geometry menu, where you can adjust image size and minimize distortions. Advanced—Opens the Advanced menu, where you can adjust the color balance, change the OSD language, and Auto display information about current monito
ملخص المحتوى في الصفحة رقم 13
www.gateway.com OSD Menu Description H-Position—Moves the display image left and right. You Geometry menu can also press the Auto button to configure the horizontal position automatically. V-Position—Moves the display image up and down. You Geometry can also press the Auto button to configure the vertical position automatically. Clock—Minimizes any vertical bars or stripes visible on the screen background. The horizontal screen size will H-Position also change. Phase—Minimizes any horizo
ملخص المحتوى في الصفحة رقم 14
Using Your Gateway Flat-Panel Monitor Changing Windows screen settings Adjusting the color depth and screen area are two of the most basic display settings you may need to change. You can also adjust settings such as the screen background and screen saver. Changing color depth and screen resolution Color depth is the number of colors your computer uses to display images on your monitor. Most images look best displayed with the maximum number of colors available. If the color in your images se
ملخص المحتوى في الصفحة رقم 15
www.gateway.com Power management Energy declaration When connected to a computer that supports the VESA Display Power Management Signaling (DPMS) Protocol, your monitor can conserve significant energy by reducing power consumption during periods of non-use. When your computer goes into the energy saving mode, your monitor will then enter the Active Off mode (sleep). In the Active Off mode the Power LED will still show orange. Use these conventions and the power can be reduced to the followin
