ملخص المحتوى في الصفحة رقم 1
HP ProDisplay LCD Backlit Monitors
User Guide
ملخص المحتوى في الصفحة رقم 2
© 2012 Hewlett-Packard Development Company, L.P. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. This document contains proprietary information that is protected by copyright. No part of this document may be photocopied, reproduced, or translated
ملخص المحتوى في الصفحة رقم 3
About This Guide This guide provides information on monitor features, setting up the monitor, and technical specifications. WARNING! Text set off in this manner indicates that failure to follow directions could result in bodily harm or loss of life. CAUTION: Text set off in this manner indicates that failure to follow directions could result in damage to equipment or loss of information. NOTE: Text set off in this manner provides important supplemental information. iii
ملخص المحتوى في الصفحة رقم 4
iv About This Guide
ملخص المحتوى في الصفحة رقم 5
Table of contents 1 Product Features ............................................................................................................... 1 HP LCD Monitors ..................................................................................................................... 1 2 Setting Up the Monitor ...................................................................................................... 3 Attaching the Stand Base ........................................................
ملخص المحتوى في الصفحة رقم 6
vi
ملخص المحتوى في الصفحة رقم 7
1 Product Features HP LCD Monitors The LCD (liquid crystal display) monitors have an active matrix, thin-film transistor (TFT) panel. The monitor models and features include: ● P191 model, 47-cm (18.5-inch) diagonal viewable area display with 1366 x 768 resolution, plus full-screen support for lower resolutions; includes custom scaling for maximum image size while preserving original aspect ratio ● P201 and P201m models, 50.8-cm (20-inch) diagonal viewable area display with 1600 x 900 resolution
ملخص المحتوى في الصفحة رقم 8
® ● Energy Star qualified Safety guidelines, certifications, and regulatory notices for these products are available in the HP ● LCD Monitors Reference Guide on the CD included with this monitor 2 Chapter 1 Product Features
ملخص المحتوى في الصفحة رقم 9
2 Setting Up the Monitor To set up the monitor, ensure that the power is turned off to the monitor, computer system, and other attached devices, then follow the instructions below. Attaching the Stand Base 1. Lift the stand base from the monitor box and set it on a flat surface such as a table top. 2. Using both hands, lift the monitor from its box, position the monitor stand over the stand base, and press down firmly to lock it in place. Be sure the stand base is securely locked in place and ad
ملخص المحتوى في الصفحة رقم 10
Rear Components Figure 2-2 Rear Components Component Function 1 AC Power Connector Connects the AC power cord to the monitor. 2 Audio Connector (select Connects the audio cable to the monitor. models) 3 DVI-D (select models) Connects the DVI-D cable to the monitor. 4 VGA Connects the VGA cable to the monitor. 4 Chapter 2 Setting Up the Monitor
ملخص المحتوى في الصفحة رقم 11
Connecting the Cables 1. Place the monitor in a convenient, well-ventilated location near the computer. 2. Remove the cable management clip from the stand by pulling outward on the two sides of the clip (1), then lifting the clip off the stand (2). Figure 2-3 Removing the Cable Management Clip 3. Connect a VGA signal cable or DVI-D signal cable (select models). NOTE: The monitor is capable of supporting either analog or digital input (select models). The video mode is determined by the video ca
ملخص المحتوى في الصفحة رقم 12
5. Connect one end of the power cord to the AC power connector on the back of the monitor, and the other end to an electrical wall outlet. Figure 2-4 Connecting the Cables WARNING! To reduce the risk of electric shock or damage to the equipment: Do not disable the power cord grounding plug. The grounding plug is an important safety feature. Plug the power cord into a grounded (earthed) electrical outlet that is easily accessible at all times. Disconnect power from the equipment by unplugging th
ملخص المحتوى في الصفحة رقم 13
Front Panel Controls Figure 2-6 Monitor Front Panel Controls Table 2-1 Monitor Front Panel Controls Control Function 1 Menu Opens, selects or exits the OSD menu. 2 Minus If the OSD menu is on, press to navigate backward through the OSD menu and decrease adjustment levels. or or If the OSD menu is inactive, press to activate the volume Minus/volume adjustment bar. Press - or + to adjust the volume (select (P201m) models). 3 Plus/source If the OSD menu is on, press to navigate forward through th
ملخص المحتوى في الصفحة رقم 14
NOTE: To view an OSD menu simulator, visit the HP Customer Self Repair Services Media Library at http://www.hp.com/go/sml. Adjusting the Monitor Tilt the monitor panel forward or backward to set it to a comfortable eye level. Figure 2-7 Tilting the Monitor Turning on the Monitor 1. Press the power button on the computer to turn on the computer. 2. Press the power button on the front of the monitor to turn on the monitor. CAUTION: Burn-in image damage may occur on monitors that display the same
ملخص المحتوى في الصفحة رقم 15
The monitor automatically scans the signal inputs for an active input and uses that input for the display. If two or more inputs are active, the monitor will display the default input source. If the default source is not one of the active inputs, then the monitor will display the highest ranking priority input in the following order: DVI then VGA. You can change the default source in the OSD by pressing the front panel Menu button and selecting Source Control > Default Source. Removing the Monit
ملخص المحتوى في الصفحة رقم 16
NOTE: This apparatus is intended to be supported by UL or CSA Listed wall mount bracket. 1. Remove the stand from the monitor. Refer to Removing the Monitor Stand on page 9. CAUTION: This monitor supports the VESA industry standard 100 mm mounting holes. To attach a third-party mounting solution to the monitor, four 4 mm, 0.7 pitch, and 10 mm long screws are required. Longer screws must not be used because they may damage the monitor. It is important to verify that the manufacturer’s mounting so
ملخص المحتوى في الصفحة رقم 17
Installing a Cable Lock You can secure the monitor to a fixed object with an optional cable lock available from HP (sold separately). Figure 2-10 Installing a Cable Lock Installing a Cable Lock 11
ملخص المحتوى في الصفحة رقم 18
3 Finding More Information Refer to the HP LCD Monitors Reference Guide included on the CD with your monitor for additional information on: ● Optimizing monitor performance ● Safety and maintenance guidelines ● Installing software from the CD ● Using the OSD menu ● Downloading software from the Web ● Agency regulatory information ● Troubleshooting and recommended solutions to common problems Product Support For additional information on using and adjusting your monitor, go to http://www.hp.com/s
ملخص المحتوى في الصفحة رقم 19
4 Technical Specifications NOTE: All specifications represent the typical specifications provided by HP's component manufacturers; actual performance may vary. P191 Model Table 4-1 P191 Specifications Maximum Weight (Unpacked) 3.2 kg 7.1 lbs Dimensions (include stand) 34.0 cm 13.4 inches Height 14.3 cm 5.63 inches Depth 44.93 cm 17.69 inches Width Maximum Graphic Resolution 1366 x 768 (60 Hz) analog input Optimum Graphic Resolution 1366 x 768 (60 Hz) analog input Power Source 100 – 240 VAC 50/
ملخص المحتوى في الصفحة رقم 20
Table 4-2 P201 and P201m Specifications (continued) Optimum Graphic Resolution 1600 x 900 (60 Hz) analog input 1600 x 900 (60 Hz) digital input Power Source 100 – 240 VAC 50/60 Hz Input Terminal One VGA connector with cable included; one DVI connector with cable included; one audio connector with cable included (P201m only) Tilt 25° Operating Temperature 5° to 35° C 41° to 95° F Operating Altitude Up to 5,000 m above sea level Up to 16,404 ft above sea level NOTE: For more information, go to
