ملخص المحتوى في الصفحة رقم 1
ENGLISH
OWNER’S MANUAL
MONITOR SIGNAGE
Please read this manual carefully before operating
your set and retain it for future reference.
MONITOR SIGNAGE MODELS
M4720C
M5520C
www.lg.com
ملخص المحتوى في الصفحة رقم 2
Table of Contents Accessories 3 Connecting the Stand 4 Connecting the Speakers 6 Install in Portrait Mode 8 Using the Remote Control 9 Name and Function of the Parts 11 Connecting to External Devices 12 When Connecting to your PC ............................................................................................12 When using the LAN ...........................................................................................................14 Daisy Chain Monitors .........................
ملخص المحتوى في الصفحة رقم 3
Accessories Accessories Thank you for your purchase. Please check the product as well as the accessories shown below ❖ Note that the accessories may look different from those shown here. Remote Control D-Sub Signal Power Cable Audio Cable (PC) CD-ROM / Cards / Batteries Cable Separate purchase Without prior notice, optional accessories are subject to change to improve the performance of the product, and new accessories may be added. ❖ Optional accessories (purchased separately) may vary depend
ملخص المحتوى في الصفحة رقم 4
Connecting the Stand - Only on some models. M4720C Take the parts for the stand out of the box and assemble them as shown in the picture. 1. First, check if the following parts are all present. Parts Screws (4) Stand (2) Place a soft cloth on the table and put the product with the screen facing downward. 2. Connect the stand as shown in the following picture. Use the screws to secure the stand on the rear side of the product as shown in the 3. diagram. 4
ملخص المحتوى في الصفحة رقم 5
Connecting the Stand - Only on some models. M5520C Take the parts for the stand out of the box and assemble them as shown in the picture. 1. First, check if the following parts are all present. Parts Screws (2) Stand (2) Place a soft cloth on the table and put the product with the screen facing downward. 2. Connect the stand as shown in the following picture. Use the screws to secure the stand on the rear side of the product as shown in the 3. diagram. 5
ملخص المحتوى في الصفحة رقم 6
Connecting the Speakers - Only on some models. M4720C Mount the speakers onto the monitor using the screws provided as shown. After installing your speakers, use holders and cable ties to organize the speaker cables. Cable holder Remove the paper. * This feature is not available in all model. When the speakers are installed. Cable tie *Connect the speaker terminals noting the correct polarity. * This feature is not available in all model. 6
ملخص المحتوى في الصفحة رقم 7
Connecting the Speakers - Only on some models. M5520C Unscrew the screws on the back of the product. Use them to mount the speakers on both sides of the product as shown in the figure. (The screws provided with the speakers are not allowed.) After installing your speakers, use holders and cable ties to organize the speaker cables. Cable holder Remove the paper. * This feature is not available in all model. When the speakers are installed. Cable tie *Connect the speaker terminals noting the co
ملخص المحتوى في الصفحة رقم 8
Install in Portrait Mode - Only on some models. "When installing Portrait, rotate it clockwise based on its front." 8
ملخص المحتوى في الصفحة رقم 9
Using the Remote Control Name of the Remote Control Buttons Power On / Off Button 1 - Switches the set on from standby or off to standby. POWER Monitor On / Off Button 2 1 - Turn off the monitor and then turn it back on. ENERGY INPUT MONITOR Number and Alphabet Buttons 2 OFF 3 ON - Type numbers. SAVING - The alphabet selection is not applicable. . , ! ABC DEF 1/a/A Button 4 3 GHI JKL MNO - This button selection is not applicable. PQRS TUV WXYZ Volume Up/Down Button 5 - Adjusts the vo
ملخص المحتوى في الصفحة رقم 10
Using the Remote Control Energy Saving Button 14 POWER - Adjust the Energy Saving mode of the SET. 14 MONITOR ENERGY INPUT INPUT Select Button 15 15 If you press the button once, the following ON OFF Input Signal Window will appear. Select the SAVING signal type you want using the button. . , ! ABC DEF Input List GHI JKL MNO AV Component RGB HDMI/DVI PQRS TUV WXYZ 16 1/a/A CLEAR - * # Clear button 16 17 MARK - This button selection is not applicable. ARC 18 P ARC Button 17 BRIGHT
ملخص المحتوى في الصفحة رقم 11
Name and Function of the Parts * The product image in the user's guide could be different from the actual image. Rear View 8 1 2 3 4 5 6 7 Power Connector 1 Connect the power cord RS-232C Serial Ports 2 RGB, HDMI/DVI Ports 3 HDMI Supports High Definition input and HDCP (High-bandwidth Digital Content Protection). Some devices require HDCP in order to display HD signals. 4 PC Sound Jack Connect the audio cable to the *LINE OUT jack of the PC sound card. Component, AV Ports 5 USB Port 6 LA
ملخص المحتوى في الصفحة رقم 12
Connecting to External Devices When Connecting to your PC First of all, see if the computer, product and the peripherals are turned off. Then, connect 1 the signal input cable. When connecting with the D-Sub signal input cable. A. When connecting with the HDMI-DVI signal input cable (not included). B. * When HDMI PC is used, a compatiblity problem might occur. A. PC Rear of Monitor. PC/MAC MAC Macintosh Adapter (not included) Use the standard Macintosh adapter since an incompatible adapter is
ملخص المحتوى في الصفحة رقم 13
Connecting to External Devices Turn on power by pressing the power button on the product. 4 1. On/Off button Turn on the PC. 2. Select an input signal. 5 Press the INPUT button on the remote control to select the input signal. INPUT → → OK Or, press the INPUT button on the back of the product. INPUT → ◄ ► → AUTO/SET When connecting with a D-Sub signal input cable. A. • Select RGB : 15-pin D-Sub analog signal. Input List HDMI/DVI AV Component RGB When connecting with a HDMI-DVI signal i
ملخص المحتوى في الصفحة رقم 14
Connecting to External Devices When using the LAN 1 Connect the LAN cable as shown in the diagram below. Using a router(Switch) A. Connect PC to Monitor directly. B. LAN LAN Switch Product PC Product PC Using the Internet. C. Network LAN Network Product PC Network Connect the LAN cable and install the eZ-Net Manager program on the CD-ROM. 2 For more information about the program, please refer to eZ-Net Guide in the enclosed CD-ROM. Note • Using LAN establishes communication between your PC and
ملخص المحتوى في الصفحة رقم 15
Connecting to External Devices Daisy Chain Monitors A. When using RGB input To use different products connected to each other Connect one end of the signal input cable (15-pin D-Sub Signal Cable) to the RGB OUT connector of product 1 and connect the other end to the RGB IN connector of other products. 15-pin D-Sub Signal Cable PC PC Product 1 Product 2 Product 3 Product 4 When using AV input B. Audio Cable (not included) Video BNC Cable (not included) Product 1 Product 2 Product 3 • The num
ملخص المحتوى في الصفحة رقم 16
Connecting to External Devices VESA FDMI wall Mounting This product supports a VESA FDMI compliant mounting interface. These mounts are purchased separately and not available from LG. Refer to the instructions included with wall mount for more info. M4720C Kensington Security Slot The Set is equipped with a Kensington Security System connector on the back panel. The cable and lock are available separate and are not sold by LG. For more info, visit http://www.kensington. com, the internet
ملخص المحتوى في الصفحة رقم 17
Connecting to External Devices Video Input Connect the video cable as shown in the below figure and then connect the 1 power cable. (See page 12). When connecting with a BNC cable. • Connect the input terminal with a proper color match. Product BNC Cable Audio Cable (not included) (not included) VCR/DVD Receiver Select an input signal. 2 Press the INPUT button on the remote control to select the input signal. INPUT → → OK Or, press the INPUT button on the back of the product. INPUT → ◄
ملخص المحتوى في الصفحة رقم 18
Connecting to External Devices Component Input (480i/480p/576i/576p/720p/1080i/1080p) Connect the video/audio cable as shown in the below figure and then, connect the power 1 cord (See page 12). • Connect the input terminal with a proper color match. Product HDTV Mode/YPbPr Horizontal Vertical Frequency Preset mode Frequency BNC Cable Audio Cable (kHz) (Hz) (not included) (not included) 1 480i 15.63 60.00 2 480p 31.47 60.00 3 576i 15.625 50.00 4 576p 31.25 50.00 5 720p 45.00 60.00 6 720p 37.
ملخص المحتوى في الصفحة رقم 19
Connecting to External Devices HDMI Input (480p/576p/720p/1080i/1080p) HDMI Supports High Definition input and HDCP (High-bandwidth Digital Content Protection). Some devices require HDCP in order to display HD signals. Connect the video/audio cable as shown in the below figure and then connect the power 1 cord (See page 12). Product Product RCA-PC HDMI-DVI Signal Cable Audio Cable HDMI Signal Cable (not included) (not included) (not included) VCR/DVD/Set-top Box VCR/DVD/Set-top Box Note :
ملخص المحتوى في الصفحة رقم 20
User Menus Screen Adjustment options 7 2 6 3 4 5 1 Press this button to turn on the power. Press this button 1 On/Off button again to turn it off. This Indicator lights up green when the display operates 2 Power Indicator normally(on mode). If the display is in sleep (Energy Saving) mode, this indicator color changes to amber. Use this button to show/hide the OSD (On Screen Display) MENU Button 3 menu screen. Use this button to select an icon or adjust the setting in the OSD OSD Select / sc
