Omega Vehicle Security DPi8 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

Step 11. Enter to the Thermocouple Type Input Submenu Step 30. Select the Deviation Control Type Submenu SPECIFICATION
Press d to display flashing, previously selected Thermocouple Press d. If flashing _DEV Deviation is displayed press a,
†
Accuracy: Output 1 :
type. otherwise press until flashing is shown. Now
b _DEV
+0.5°C temp; Relay 250 Vac @ 3 A Resistive Load,
press d to store and go to next menu item.
0.03% rdg. process typical SSR, Pulse
†
Resolution: Output 2 :
Step 12. Scroll through

ملخص المحتوى في الصفحة رقم 2

This Quick Start Reference provides information Disassembly Instruction: CONFIGURATION OPERATION - (For Thermocouple Input) START HERE on setting up your instrument for basic operation. If necessary, the board assembly may be removed from the Step 1. Apply Power to the Instrument The latest complete Communication and Operational front of the case housing. MENU Mode: When your device is first powered up it will display the Manual as well as free Software and ActiveX Controls Flashing display in M