ملخص المحتوى في الصفحة رقم 1
Video Monitor
Operating Instructions
Model No. WV-LC1710
Before attempting to connect or operate this product,
please read these instructions carefully and save this manual for future use.
FRANÇAIS ENGLISH
ملخص المحتوى في الصفحة رقم 2
ENGLISH VERSION Caution: Before attempting to connect or operate this product, please read the label on the rear. For U.S.A NOTE: This equipment has been tested and found to com- ply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to CAUTION provide reasonable protection against harmful interference RISK OF ELECTRIC SHOCK when the equipment is operated in a commercial environ- DO NOT OPEN ment. This equipment generates, uses, and
ملخص المحتوى في الصفحة رقم 3
IMPORTANT SAFETY INSTRUCTIONS 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9) Do not defeat the safety purpos
ملخص المحتوى في الصفحة رقم 4
LIMITATION OF LIABILITY THIS PUBLICATION IS PROVIDE “AS IS” WITHOUT WAR- THIS PUBLICATION COULD INCLUDE TECHNICAL INAC- RANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, CURACIES OR TYPOGRAPHICAL ERRORS. CHANGES ARE INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRAN- ADDED TO THE INFORMATION HEREIN, AT ANY TIME, FOR TIES OF MERCHANTABILITY, FITNESS FOR ANY PARTICU- THE IMPROVEMENTS OF THIS PUBLICATION AND/OR THE LAR PURPOSE, OR NON-INFRINGEMENT OF THE THIRD CORRESPONDING PRODUCT(S). PARTY’S RIGHT.
ملخص المحتوى في الصفحة رقم 5
CONTENTS IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 LIMITATION OF LIABILITY. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 DISCLAIMER OF WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 PREFACE. . . . .
ملخص المحتوى في الصفحة رقم 6
PREFACE This monitor is a 17" type LCD Monitor, using a motion adaption IP conversion circuit and Y/C separation circuit for high definition and high resolution of picture display. FEATURES • Built-in high resolution (SXGA) panel with high contrast ratio, • Onscreen setup menu. wide view angle and true 8 bit full color. • Auto-volt power supply from 100 V AC ~ 240 V AC (AC Adapter). • Selectable inputs, including Composite Video, S-Video, Note: The included AC power cord is for 120 V AC only.
ملخص المحتوى في الصفحة رقم 7
MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS Front View Rear View a Power Button ( ) f Direction Buttons ( PIP / POS) This button turns the power of the monitor on and off. These buttons move the cursor to the item parameters in the Video Adjustment Menu. PIP : Down Note: POS : Up • Even if the POWER button is turned off and the power indicator lits off, power supply in AC Adapter • PIP Button (Picture-In-Picture) does not turn off. Pressing this button displays or removes d
ملخص المحتوى في الصفحة رقم 8
l Audio Output Connector (AUDIO OUT) p Component Video Input Connectors (COMPONENT The audio input signal connected to the audio input connector IN Y, Cb, Cr) is looped through this connector. These connectors are used to input Component Video signal (Y, Cb, Cr). m S-Video Input Connector (S-VIDEO IN) This connector is used to input S-Video signal. q PC Input Connector (PC IN) This connector is used to input analog RGB signal from PC. n Video Input Connector (VIDEO IN) Supported Timing D
ملخص المحتوى في الصفحة رقم 9
- + INSTALLATION Cautions: • The installation described below should be made by qualified service personnel or system installers. • During installation, remove all connected cables and turn off the power of the monitor. Removing Stand in the Monitor Before installing this monitor on the wall or in the rack, the monitor stand shall be removed. 1 Remove two M4 screws to remove the stand cover. Remove the stand assembly by removing four M4 2 screws from the stand. 3 Remove the stand arm by remo
ملخص المحتوى في الصفحة رقم 10
Mounting on the Wall To install this monitor on the wall, use the VESA standard 100 mm pitch bracket (procured locally) and four screws (procured locally). VESA mounting holes (100 mm pitch) VESA standard 100 mm pitch bracket (procured locally) Wall Mounting Screws (procured locally) Cautions: • Do not block the ventilation opening or slots on the cover to prevent from overheating. • When installing on places with vibration, fix securely the rear of the monitor by using reinforcement angle. •
ملخص المحتوى في الصفحة رقم 11
CONNECTIONS PC Video Output Digital Disk Recorder Video S-Video Audio Output Output Output AC Adapter (Supplied Accessory) Power Cord (Supplied Accessory) Video Monitor Audio Input Y Cb Cr Component Output Video DVD Input 11
ملخص المحتوى في الصفحة رقم 12
Connection with the Camera Site Connect the video output of the camera site equipment to the VIDEO IN connector on the rear of the monitor using coaxial cable. The maximum coaxial cable lengths available between the camera and monitor are shown below. Cable Recommended Cable Length RG-59/U 3C-2V 250 m {825 feet} RG-6/U 5C-2V 500 m {1 650 feet} RG-11/U 7C-2V 600 m {1 980 feet} RG-15/U 10C-2V 800 m {2 640 feet} Multiple Monitor Connection To monitor the same video/audio on multiple monitors, conne
ملخص المحتوى في الصفحة رقم 13
STARTUP Before operating this monitor, confirm that the camera, other video sources and peripherals are connected correctly and securely. Onscreen display of NO SIGNAL displays on the center of the 1. Turn on the monitor by pressing the POWER button. screen as shown below, when there is no input signal. The power indicator lights up in green. 2. Select the desired input to be displayed by pressing the INPUT SELECT button. Onscreen display of the input signal currently on use displays for
ملخص المحتوى في الصفحة رقم 14
AUDIO VOLUME CONTROL The audio volume can be adjusted with the - or + button when picture is displayed. When these buttons are pressed, the icon and digital display of audio volume setting appear on the upper left side of the screen. - : Decreases the audio volume. + : Increases the audio volume. 14
ملخص المحتوى في الصفحة رقم 15
DISPLAYING VIDEO ADJUSTMENT MENU Settings of this monitor can be done in the Video Adjustment Menu. The display on the screen differs depending on the input signal. Caution: • When onscreen display of NO SIGNAL, OUT OF RANGE, VIDEO LOSS, etc., appears on the center of the screen, the Video Adjustment Menu cannot be displayed even if MENU button is pressed. Displaying Video Adjustment Menu 1. Press the MENU button. If the menu title is VIDEO IN, S-VIDEO IN or COMPONENT IN, the Video Adjustmen
ملخص المحتوى في الصفحة رقم 16
Setting of Composite Video / S-Video / Component Video Input 1. Display the Video Adjustment Menu. 3. Move the cursor to the COLOR TEMP (NTSC) or COLOUR (Refer to page 15) TEMP (PAL) parameters with the PIP or POS button, then select color temperature of display with - or + button. VIDEO IN NTSC STANDARD : Pictures are displayed in normal color temperature. BRIGHT 0 9300K : Pictures are displayed in bluish CONTRAST
ملخص المحتوى في الصفحة رقم 17
6. To reset the monitor to the default settings, move the cursor to the NORMAL SETTINGS with the PIP or POS button, then press the - or + button to restore the default settings. Onscreen display of NORMAL SETTINGS as shown below appears on the center of the screen when - or + button is pressed. Note: • During reset, setting parameters of Video Adjustment Menu only are being reset. NORMAL SETTINGS VIDEO IN NTSC BRIGHT -12 CONTRAST 8 SHARPNESS -16 COLOR -6 TINT -2 VOLUME -4 H-POSITION
ملخص المحتوى في الصفحة رقم 18
Setting of PC Input 1. Display the Video Adjustment Menu. 5. Move the cursor to either USER COLOR R, USER COLOR G, (Refer to page 15) or USER COLOR B parameter in the menu with the PIP or POS button, then adjust the red, green, or blue color for color temperature. PC IN 1280x1024@60Hz - : Decreases the red, green, or blue color. BRIGHT 0 CONTRAST 0 + : Increases the red, green, or blue color. H-POSITION 0 V - POSITION 0 CLOCK 0 6. To reset the monitor to the default settings, move
ملخص المحتوى في الصفحة رقم 19
Notes: CONNECTING WITH WJ-HD300 SERIES • There is a possibility that the picture will be shifted if the • H-POSITION, V-POSITION, CLOCK and PHASE will Monitor (VGA) terminal of the Digital Disk Recorder WJ- change depending on the input signal. HD300 series is connected to the PC input even AUTO Normally, these parameters need not to be set. In case the position of the picture is still shifted even button is pressed. In this case, adjust H-POSITION AUTO TUNING button is pressed, operate ba
ملخص المحتوى في الصفحة رقم 20
TROUBLESHOOTING Phenomenon Cause What to do Connect the DC input terminal of the DC input terminal of the AC Adapter is AC Adapter to DC IN connector of this not properly connected. monitor. Power supply plug is not properly con- Connect the power supply plug to the Power is not turned on. nected. AC outlet. The AC cord is not properly connected to Connect the AC cord to the AC Adapter. the AC Adapter. Connect the respective cable properly. Cable is not properly connected. NO SIGNAL is disp
