ملخص المحتوى في الصفحة رقم 1
LM-6200 Series
LCD Monitor
User’s Manual
Rev. Original
I. FEATURES
• Light weight and high luminance LCD
monitor for industrial and commercial use
• Application covers POS, POIS (Kiosk), factory Automation etc.
• High quality 12.1” TFT LCD panel with scaling up function for full screen
display
• Successor from earlier LM-6100 series and supports display resolution up
to 800 x 600 pixels
• Tilt and swivel adjustable construction
• Spill proof and easy maintenance structure
ملخص المحتوى في الصفحة رقم 2
II. MODEL NUMBERS LM-6212: 12.1” LCD Monitor w/ stand LM-6201: 12.1” LCD Monitor w/ joining mechanism for Posiflex touch terminals such as TP or KS series LM-6201 on back of LM-6212 TP or KS III. CARTON CONTENTS 1. LCD Monitor panel unit 2. Monitor stand (for LM-6212) or joining mechanism (for LM-6201) 3. Pivot screw (1x) and pan head fixing screws (2x for LM-6201) 4. User’s Manual 5. VGA cable: 21867244100 (for LM-6212) or 21863241710 (for LM-6201) 6. Power
ملخص المحتوى في الصفحة رقم 3
be supplied through the interface cable from the main unit and just connect the video interface cable. Connect the other end of VGA cable to the appropriate VGA port. The monitor will always turn ON whenever power is made available. Power Connector in VGA for LM-6212 Cable VGA Connector Power Connector from Power Adaptor 5. Adjust for best viewing tilt angle and engage the on screen display (OSD) adjustment for best display effect whenever necessary. The monitor will
ملخص المحتوى في الصفحة رقم 4
B. OSD functions Press “OSD” button with a normal display on the screen to activate the OSD functions (On Screen Display adjustment). The OSD window will pop up on the screen. On top part of this window is a Posiflex logo with the OSD firmware version indicated to its lower right. Below this area is a row of icons for main OSD menu. Below the main menu is a group of icons for submenu that corresponds to one icon selected in the main menu. An analysis of the video signal on resolution an
ملخص المحتوى في الصفحة رقم 5
make the choice. “ACCEPT”: Accept the adjustment setting. “REJECT”: Decline the adjustment setting and return to previous setting. “AUTO RGB RESET”: Upon an “OSD” button press on this icon the monitor will perform an automatic RGB reset and exits the OSD window leaving 2 icons below at center of the screen. Press “NXT” button to switch the selection. Press “OSD” button to make the choice. “ACCEPT”: Accept the reset result. “REJECT”: Decline the reset and return to previous setting.
ملخص المحتوى في الصفحة رقم 6
on this icon the monitor will perform an automatic geometry adjustment and exits the OSD window leaving 2 icons below at center of the screen. Press “NXT” button to switch the selection. Press “OSD” button to make the choice. “ACCEPT”: Accept the adjustment setting. “REJECT”: Decline the adjustment setting and return to previous setting. “HORIZONTAL SIZE”: When this item is selected, there will be only the horizontal size icon with an adjustment indication bar under it between the mai
ملخص المحتوى في الصفحة رقم 7
it between the main menu area and the video signal mode. Press “+” or “-” button to adjust the waiting time for OSD operation before OSD termination between 5 to 60 seconds. Default is 30 seconds. Press “OSD” button to save the current setting and return to “OSD submenu”. “OSD HORIZONTAL POSITION”: When this item is selected, there will be only the vertical position icon with an adjustment indication bar under it between the main menu area and the video signal mode. Press “+” button to
ملخص المحتوى في الصفحة رقم 8
VI. SUPPORTED DISPLAY MODES For video signals beyond the supported display modes, there will be a message “Out Of Range” on middle of screen. Maximum supported color depth is 18 bits or 262,144 colors. Supported display modes are as in the table: Display Resolution Refresh Rate (Hz) Horizontal Frequency (KHz) 640*400 70 37.9 60 31.5 640*480 72 37.9 75 37.5 720*400 70 37.9 56 35.1 60 37.9 800*600 72 48.1 75 46.9 Part 8
ملخص المحتوى في الصفحة رقم 9
Part 9
ملخص المحتوى في الصفحة رقم 10
T31454 Part 10
