ملخص المحتوى في الصفحة رقم 1
15-INCH
TFT-LCD MONITOR
15RTV
INSTRUCTION MANUAL
Please read this manual thoroughly before use, and keep it handy for future reference.
ملخص المحتوى في الصفحة رقم 2
SAFETY INSTRUCTION…………………………………………………………………….2 - 3 CAUTIONS ………………………………………..……………………………………………..4 FCC RF INTERFERENCE STATEMENT …………………………………………………….5 CONNECTING WITH EXTERNAL EQUIPMENT…………………………………………… 6 REMOTE FUNCTIONS ……………………………………………………………………….. 7 CONTROLS AND FUNCTIONS…………………………………………………………..8 - 14 MOUNTING GUIDE …………………………………………………………….……..…….. 15 D-SUB CONNECTOR PIN ASSIGNMENTS ……………………………………………….16 POWER MANAGEMENT……………………………………………………………………..17 SPECIFICATIONS……………………………………
ملخص المحتوى في الصفحة رقم 3
1. Read all of these instructions. 2. Save these instructions for later use. 3. Follow all warnings and instructions marked on the product. 4. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. 5. Do not use this product near water. 6. Do not place this product on an unstable cart, stand or table. The product may fall, causing serious damage to the product. 7. Slots and openings in the cabinet and the
ملخص المحتوى في الصفحة رقم 4
Refer all servicing to service personnel. 14. Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions. A. When the power cord or plug is damaged or frayed. B. If liquid has been spilled into the product. C. If the product has been exposed to rain or water. D. If the Product does not operate normally when the operating instructions are followed. Adjust only those controls that are covered by the operating instructions sin
ملخص المحتوى في الصفحة رقم 5
▶ NEVER REMOVE THE BACK COVER Removal of the back cover should be carried out only by qualified personnel. ▶ DO NOT USE IN HOSTILE ENVIRONMENTS To prevent shock or fire hazard, do not expose the unit to rain or moisture. This unit is designed to be used in the office or home. Do not subject the unit to vibrations, dust of corrosive gases. ▶ KEEP IN A WELL VENTILATED PLACE Ventilation holes are provided on the cabinet to prevent the temperature from rising. Do not cover the unit or pl
ملخص المحتوى في الصفحة رقم 6
NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that in
ملخص المحتوى في الصفحة رقم 7
A. BOTTOM PANEL CONTROL 1 2 3 4 5 6 7 8 9 10 11 1. DC 12V IN 2. D-SUB IN PC Signal Input 3. VIDEO 1(AV1) IN Composite signal Input for AV1 4. VIDEO 1(AV1) OUT Video looping output for AV1 5. VIDEO 2(AV2) IN Composite signal Input for AV2 6. VIDEO 2(AV2) OUT Video looping output for AV2 7. AUDIO L IN Stereo Audio L Signal Input, This input is for AV1, AV2, S-VIDEO 8. AUDIO R IN Stereo Audio R Signal Input, This input is for AV1, AV2, S-VIDEO 9. S-VIDEO (Y/C) IN Y
ملخص المحتوى في الصفحة رقم 8
B. REMOTE CONTROLLER 1. POWER( ) Turns the power ON or OFF. There will be a few seconds delay before the display appears. 2. SOURCE Select pc or video( PC / AV1 / AV2 / S-Video ) sources. 3. MUTE Mute the sound. 4. MENU Activates and exits the On Screen Display. 5. VOL( ) Increases or decreases the level of audio volume. 6. UP/DOWN( ) Move to OSD menu. 7. AUTO Auto geometry adjustment in PC Source. 8. EXIT Exit the On Screen Display. 7 ……………………………………
ملخص المحتوى في الصفحة رقم 9
1 2 3 4 5 6 7 8 1. SOURCE Select input source, and move the previous menu. 2. MENU Activates and exits the On Screen Display. This button can also be used to move previous menu or status. OSD MENU(MAIN) : Input Source, Screen, Audio, OSD, Color, Utility, Exit. 3/4. DOWN / UP This button allows user to enter the sub-menu of the activated function when down key is pressed on the main menu. 5/6. ◀ VOL ▶ Adjust the volume / Adjust menu settings. 7. IR Sensor Re
ملخص المحتوى في الصفحة رقم 10
1. SELF-TEST DISPLAY When there is no connection at PC, the On Screen Display will show for 3 seconds. 2. OSD MENU DESCRIPTION : Input Source Select PC or AV1, SVIDEO. 9 …………………………………………………………………………… INSTRUCTION MANUAL
ملخص المحتوى في الصفحة رقم 11
: Screen : Brightness Increase or decrease the intensity of the image. : Contrast Increase or decrease the intensity (lightness or dimness) of the image. : H. position (PC Mode Only) Move image horizontally on screen right or left. : V. position (PC Mode Only) Move image vertically on screen up or down. : Clock (PC Mode Only) Adjust the vertical noise of screen image. : Phase (PC Mode Only) Adjust the number of horizontal picture elements. INSTRUCTION MANUAL…………………
ملخص المحتوى في الصفحة رقم 12
: Audio : Volume Adjust audio volume. 11 …………………………………………………………………………… INSTRUCTION MANUAL
ملخص المحتوى في الصفحة رقم 13
: OSD : H. Position Move the OSD position to right(▶) or left(◀). : V. Position Move the OSD position to up(▶) or down(◀). : Transparency Select the OSD background. : OSD Timer Select the OSD display timing. : Language Select a language among English, Français, Deutsch, Español, Danish, Italiano. INSTRUCTION MANUAL…………………………………………………………………………… 12
ملخص المحتوى في الصفحة رقم 14
: Color (PC Mode) : Color Temp Adjust color temperature to 9300, 6500, user. (note : 9300 is factory default) : Red Adjust red color for user. : Green Adjust green color for user. : Blue Adjust blue color for user. 13 …………………………………………………………………………… INSTRUCTION MANUAL
ملخص المحتوى في الصفحة رقم 15
: Utility : Recall Select to reset all setting to the factory default values. : Lock Select ON or OFF (ON : Control key lock. OFF : Control key unlock) : Exit H :15.7KHz V : 60.0Hz : Exit Turn off OSD Menu. INSTRUCTION MANUAL…………………………………………………………………………… 14
ملخص المحتوى في الصفحة رقم 16
Wall-mount installation: 1) Remove the pedestal mount installed on the monitor. 2) Use the VESA standard mounting design and the 100mm hole pattern on the back panel to install the LCD monitor to the (optional) mounting bracket sold separately. (Screws supplied with the mounting bracket.) 15 …………………………………………………………………………… INSTRUCTION MANUAL
ملخص المحتوى في الصفحة رقم 17
▶ PIN ASSIGNMENTS ▶ ACCESSORY 1. POWER CORD 2. USER’S MANUAL 3. PC cable 4. Adaptor 5. Remote Control 6. Batteries 7. Wall mount (Option) INSTRUCTION MANUAL…………………………………………………………………………… 16
ملخص المحتوى في الصفحة رقم 18
This monitor features a power management system to “power down” upon receipt of the VESA DPMS(The display power management signaling) from a VESA DPMS video card. The VESA DPMS-compliant video card performs this signaling system through not sending horizontal, vertical, or sync signal. This monitor enters an appropriate mode through identifying each of the three modes of the signaling system. POWER CONSUMPTION MODE POWER CONSUMPTION ON < 36W STANDBY < 5W SUSPEND < 5W ACTIV OFF < 5
ملخص المحتوى في الصفحة رقم 19
▶ LCD Type 15˝ Diagonal AM-TFT(Active-Matrix) Pixel pitch (mm) : 0.297(H) 0.297(V) BRIGHTNESS: 250cd/㎡(Typical) CONTRAST RATIO: 450:1(Typical) RESPONSE TIME: 12msec (Typical) ▶ RESOLUTION(H x V) 1024X768 @ 60Hz ▶ FREQUENCY HORIZONTAL : 30KHz - 48KHz VERTICAL : 56Hz - 75Hz ▶ INPUT SIGNAL RGB (Analog 0.7Vp-p / 75Ω) SYNC(Separate TTL Level) AV(2ch input 1.0Vp-p, 75 Ω terminated, loop-through out) S-VIDEO(1ch input (Y/C) , loop-through out), AV(composite) Sound in PC Stereo Sou
ملخص المحتوى في الصفحة رقم 20
“Going to Sleep” message on screen WEEE Symbols Correct Disposal of This Product (Waste Electrical &Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature,indicates that it should not be disposed with other household wastes at the end of its working life.To prevent possible harm to the environment or human health from uncontrolled waste disposal,ple
