Inhaltszusammenfassung zur Seite Nr. 1 
                    
                        INTELLIGENT
Power Supply / Charger
OWNERS MANUAL
  KIPS12-45
 KIPS12-60
KIPS12-80
Computer Controlled Charging System
The Intelligent way to charge and maintain your vehicle’s battery.
45 AMP • 60 AMP • 80 AMP
Constantly monitors the battery voltage and automatically
selects one of four operating modes:
NORMAL • BOOST • STORAGE • DESULFATION                                                                                                                                                             
                    
                    Inhaltszusammenfassung zur Seite Nr. 2 
                    
                        FEATURES INTELLIGENT CHARGING The Kinetik Intelligent Power Converter is the intelligent way to charge your Kinetik battery.  The  built-in microprocessor constantly monitors the battery voltage then automatically adjusts the  converter output voltage to provide the proper charging voltage for fast recharges and long-term  maintenance. MULTIPLE BATTERY CHARGING Kinetik Intelligent Power Converters have the capability of charging multiple batteries at the same  time!  They can even charge a combi
                    
                    Inhaltszusammenfassung zur Seite Nr. 3 
                    
                        GENERAL INFORMATION Kinetik Intelligent 120 VAC to 12 VDC Power Converters are state-of-the-art  electronic converters / battery chargers.  Their compact size and quiet operation  gives greater flexibility in selecting the mounting locaiton for either OEM installa- tion or after market replacement. The Kinetik Intelligent Power Converters have a computer controlled charging  module built in.  This is a microprocessor-controlled device which constantly  monitors the battery, and then automaticall
                    
                    Inhaltszusammenfassung zur Seite Nr. 4 
                    
                        GENERAL INFORMATION (continued...) 14.4 Volts (Boost Mode) Returned the battery to 90% of full charge in approximately 8 hours.  The battery  reached full charge in approximately 11 hours. 13.6 Volts (Normal Mode) Required 40 hours to return the battery to 90% of full charge and 78 hours to  reach full charge. 13.2 Volts (Storage Mode) Required 60 hours to return the battery to 90% of full charge and 100 hours to  reach full charge. The integrated intelligent microprocessors ability to change th
                    
                    Inhaltszusammenfassung zur Seite Nr. 5 
                    
                        INSTALLATION INSTRUCTIONS Horizontal mounting of the Kinetik Intelligent Power Converter is recommended  although it can be mounted in any position that provides unobstructed ventilation  to the fan and vent holes.  Secure the converter firmly to the mounting surface  using standard fasteners. The installer should test the converter under full load conditions in its intended  mounting location.  This will insure that there is sufficient unobstructed ventila- tion to the converter allowing it to 
                    
                    Inhaltszusammenfassung zur Seite Nr. 6 
                    
                        TROUBLE SHOOTING GUIDE PROBLEM POSSIBLE CAUSES ACTION 1. No Output 120 VAC supply not con- Connect power supply nected Check AC distribution panel  for proper operation External Fuses Blown Check for Reverse Polarity Replace Fuses with same  type and rating Short Circuit Trace Circuits for possible  fault Unit has shutdown due Check air flow to overheating Allow unit to cool Unit has shutdown due Check input voltage to over voltage (Also see  Converter will shut down if  item 5 below) the input 
                    
                    Inhaltszusammenfassung zur Seite Nr. 7 
                    
                        INPUT/OUTPUT SPECIFICATIONS KINETIK KIPS12-45 KINETIK KIPS12-60 Input: 105-130 VAC 60 Hz 725 Watts Input: 105-130 VAC 60 Hz 1000 Watts Output: 13.6 VDC, 45 Amps Output: 13.6 VDC, 60 Amps Dimensions: 4.5H x 8.625L x 7.25W Dimensions: 3.6H x 9.15L x 9W Weight: 4.5lbs Weight: 5.8lbs KINETIK KIPS12-80 Input: 105-130 VAC 60 Hz 1300 Watts Output: 13.6 VDC, 80 Amps Dimensions: 3.6H x 11.65L x 9W Weight: 7.5lbs CAUTION RISK OF FIRE: Chassis bonding wire must be a separate wire  ran directly from the Gro
                    
                    Inhaltszusammenfassung zur Seite Nr. 8 
                    
                        KINETIK POWER CONVERTER LIMITED WARRANTY I. LIMITED WARRANTY: Kinetik warrants its power converter to be free from defects in  material or workmanship under normal use and service; and limits the repair or replacment.  II. DURATION: This warranty shall extend for a period of one year from the original date of  purchase, and is only valid within the continental limits of the United States and Canada.  III. WARRANTY EXCLUSIONS: This warranty specifically does not apply to:  A. Any power converter