Inhaltszusammenfassung zur Seite Nr. 1
TD-8616B
ADSL2/2+ Ethernet Modem
Rev: 1.0.1
1910010015
Inhaltszusammenfassung zur Seite Nr. 2
COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-LINK TECHNOLOGIES CO., LTD. Copyright © 2008 TP-LINK TECHNOLOGIES CO.,
Inhaltszusammenfassung zur Seite Nr. 3
FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to pro-vide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not in-stalled and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guaran
Inhaltszusammenfassung zur Seite Nr. 4
Package Contents The following items should be found in your package: One TD-8616B ADSL2/2+ Ethernet Modem One AC power Adapter for TD-8616B ADSL2/2+ Ethernet Modem Quick Installation Guide One RJ45 cable Two RJ11 cables One ADSL splitter One Resource CD , including: This User Guide Other Helpful Information Note: Make sure that the package contains the above items. If any of the listed items are damaged or missing, please contact with your distributor.
Inhaltszusammenfassung zur Seite Nr. 5
CONTENTS Chapter 1. Introduction ........................................................................................ 1 1.1 Product Overview...................................................................................................... 1 1.2 Main Features ........................................................................................................... 1 1.3 Conventions .....................................................................................................
Inhaltszusammenfassung zur Seite Nr. 6
TD-8616B ADSL2/2+ Ethernet Modem User Guide Chapter 1. Introduction Thank you for choosing the TD-8616B ADSL2/2+ Ethernet Modem . 1.1 Product Overview The device is designed to provide a simple and cost-effective ADSL Internet connection for a private Ethernet network. The Modem is easy to use. The TD-8616B connects to an Ethernet LAN or computers via standard Ethernet ports. The ADSL connection is made using ordinary telephone line with standard connectors. Multiple workstations ca
Inhaltszusammenfassung zur Seite Nr. 7
TD-8616B ADSL2/2+ Ethernet Modem User Guide Chapter 2. Hardware Installation 2.1 The Front Panel Figure 2-1 The LEDs locate on the front panel, which indicate the device’s working status. For details, please refer to LED Explanation. LED Explanation: Name Status Indication On LAN port normal LAN Off Connection on LAN port abnormal Flash Data transmitting or receiving on LAN port Slow flash Connection to telecom network is abnormal ADSL Quick flash Connecting to the telecom n
Inhaltszusammenfassung zur Seite Nr. 8
TD-8616B ADSL2/2+ Ethernet Modem User Guide LAN: Through the port, you can connect the Modem to your PC or the other Ethernet network devices. LINE: Through the port, you can connec t the Modem with the telephone. 2.3 Installation Environment The Product should not be located where it will be exposed to moisture or excessive heat. Place the Modem in a location where it can be connected to the various devices as well as to a power source. Make sure the cables and power cord are pla
Inhaltszusammenfassung zur Seite Nr. 9
TD-8616B ADSL2/2+ Ethernet Modem User Guide Figure 2-3 4
Inhaltszusammenfassung zur Seite Nr. 10
TD-8616B ADSL2/2+ Ethernet Modem User Guide Chapter 3. Quick Installation Guide 3.1 Configure PC After you directly connect your PC to the TD-8616B or connect your adapter to a Hub/Switch which has connected to the Router, you need to configure your PC’s IP address. Follow the steps below to configure it. Step 1: Click the Start menu on your desktop, right click My Network Places, and then select Properties (shown in Figure 3-1). Figure 3-1 Step 2: Right click Local Area Connecti
Inhaltszusammenfassung zur Seite Nr. 11
TD-8616B ADSL2/2+ Ethernet Modem User Guide Figure 3-2 Step 3: Select General tab, highlight Internet Protocol (TCP/IP), and then click the Properties button. Figure 3-3 6
Inhaltszusammenfassung zur Seite Nr. 12
TD-8616B ADSL2/2+ Ethernet Modem User Guide Step 4: Configure the IP address (Figure 3-4): Enter the IP address as 192.168.1.* (* is any value between 2 to 254, Subnet mask is 255.255.255.0). After that, click OK. Figure 3-4 Note: 1) The users of Windows 98 can open TCP/IP Properties according to the following: Right-press (Mouse) Network Neighbor -> Choose Properties -> Double-press TCP/IP. PCI Fast Ethernet Adapter. 2) The words in fact maybe are different with this guide. Now,
Inhaltszusammenfassung zur Seite Nr. 13
TD-8616B ADSL2/2+ Ethernet Modem User Guide Figure 3-5 If the result displayed is similar to the screen shown below, it means that your PC has not connected to the Modem. Figure 3-6 You can check it follow the steps below: 1) Is the connection between your PC and the Modem correct? The LEDs of LAN port which you link to the device and the LEDs on your PC's adapter should be lit. 2) Is the TCP/IP configuration for your PC correct? If the Modem's IP address is 192.168.1.1, your PC'
Inhaltszusammenfassung zur Seite Nr. 14
TD-8616B ADSL2/2+ Ethernet Modem User Guide Figure 3-7 After that you will see the page as follow when ADSL connection is OK. Figure 3-8 9
Inhaltszusammenfassung zur Seite Nr. 15
TD-8616B ADSL2/2+ Ethernet Modem User Guide Chapter 4. Software Configuration This User Guide recommends using the “Quick Installation Guide” for first-time installation. For advanced users, if you want to know more about this device and make use of its functions adequately, maybe you will get help from this chapter to configure the advanced settings through the Web-based Utility. After your successful login, you can configure and manage the device. There are main menus on the top of t
Inhaltszusammenfassung zur Seite Nr. 16
TD-8616B ADSL2/2+ Ethernet Modem User Guide Figure 4-2 Choose “Statistics →Traffic Statistics” menu, and you will be able to view the traffic statistics about the Modem. Figure 4-3 4.2 Basic Setup Choose “Basic Setup”, you can see the next submenus: WAN Setting, LAN Setting and ADSL. Figure 4-4 11
Inhaltszusammenfassung zur Seite Nr. 17
TD-8616B ADSL2/2+ Ethernet Modem User Guide Click any of them, and you will be able to configure the corresponding function. 4.2.1 WAN Setting Choose “Basic Setup →WAN Setting” menu, you can configure the parameters for WAN ports in the next screen (shown in Figure 4-5). Figure 4-5 WAN Setting: WAN settings are used to connect to your ISP. Your ISP provides VPI (Virtual Path Identifier), VCI (Virtual Channel Identifier) settings to you. In this Device, you can totally setup 2 VCs o
Inhaltszusammenfassung zur Seite Nr. 18
TD-8616B ADSL2/2+ Ethernet Modem User Guide Figure 4-6 LAN Setting: These are the IP settings of the LAN interface for the device. These settings may be referred to as Private settings. You may change the LAN IP address if needed. The LAN IP address is private to your internal network and cannot be seen on the Internet. • IP Address: Enter the Modem’s local IP Address, then you can access to the Web-based Utility via the IP Address, the default value is 192.168.1.1. • IP Subnet Mask
Inhaltszusammenfassung zur Seite Nr. 19
TD-8616B ADSL2/2+ Ethernet Modem User Guide 4.3.1 Administration Choose “Maintenance →Administrator”, you can set new password for admin in the screen (shown in Figure 4-8). Figure 4-8 Note: 1) There is only one account that can access Web-Management interface. The default account is "admin", and the password is "admin". Admin has read/write access privilege. 2) When you change the password, you should enter the new password twice, and then click SAVE to make the new password take
Inhaltszusammenfassung zur Seite Nr. 20
TD-8616B ADSL2/2+ Ethernet Modem User Guide Step 2: Type the path and file name of the update file into the “New Firmware Location” field. Or click the Browse button to locate the update file. Step 3: Click the UPGRADE button. Note: 1) New firmware versions are posted at www.tp-link.com and can be downloaded for free. If the modem is not experiencing difficulties, there is no need to download a more recent firmware version, unless the version has a new feature that you want to use. 2
