Inhaltszusammenfassung zur Seite Nr. 1 
                    
                        Cook, Hold, Smoke Oven
Deluxe Control
Model: 
300-TH/III
500-TH/III
750-TH/III
1000-TH/III
1200-TH/III
767-SK/III
1767-SK/III
1000-SK/III
1200-SK/III
1200-TH/iii 
1767-SK/iii
750-TH/iii  
	 	 • 	 Installat I on
	 • 	o perat I on
1000-SK/iii
• 	 Ma I ntenance
500-TH/iii 
300-TH/iii  
w164 N9221 water Street • p.O. box 450 • menomonee falls, wisconsin 53052-0450  USa
 PHONE: 262.251.3800 • 800.558.8744 USA/CANADA   FAX:   262.251.7067 • 800.329.8744 U.S.A. ONLY 
www.alto-shaam.com
MN-29758 ( r e v
                    
                    Inhaltszusammenfassung zur Seite Nr. 2 
                    
                        Sanitation Delivery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Sanitation/Food Safety . . . . . . . . . . . . . . . . . . . . . . . 27 Unpacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Internal Food Product Temperatures . . . . . . . . . . . . . 27 Safety Procedures and Precautions . . . . . . . . . . . . . . . . . 2 Service Installation Trouble Shooting - Error Codes .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 28 Install
                    
                    Inhaltszusammenfassung zur Seite Nr. 3 
                    
                        ® dELIVERy UNpAcKINg 1. Carefully remove the   This Alto-Shaam appliance has been  appliance from the  thoroughly tested and inspected to ensure only  carton or crate. the highest quality unit is provided.  Upon  receipt, check for any possible shipping damage   NOTE:   Do not discard the  and report it at once to the delivering carrier.   carton and other  See Transportation Damage and Claims section  packaging material  located in this manual. until you have   This appliance, complete with una
                    
                    Inhaltszusammenfassung zur Seite Nr. 4 
                    
                        SAFETy pROcEdURES ANd pREcAUTIONS Knowledge of proper procedures is essential to the  1. This appliance is intended to cook, hold  safe operation of electrically and/or gas energized  or process foods for the purpose of human  equipment.  In accordance with generally accepted  consumption.  No other use for this appliance is  product safety labeling guidelines for potential  authorized or recommended. hazards, the following signal words and symbols  2. This appliance is intended for use in comme
                    
                    Inhaltszusammenfassung zur Seite Nr. 5 
                    
                        INSTALLATION dANgER cAUTION iMPROPER iNSTALLATiON,  METAL PARTS Of THiS EQUiPMENT  ALTERATiON, ADJUSTMENT,  bECOME EXTREMELY HOT WHEN  SERViCE, OR MAiNTENANCE COULD  iN OPERATiON.  TO AVOiD bURNS,  RESULT iN SEVERE iNJURY, DEATH,  ALWAYS USE HAND PROTECTiON  OR CAUSE PROPERTY DAMAGE. WHEN OPERATiNG THiS APPLiANCE. READ THE iNSTALLATiON,  OPERATiNG AND MAiNTENANCE  iNSTRUCTiONS THOROUGHLY  bEfORE iNSTALLiNG OR SERViCiNG  THiS EQUiPMENT.   dANgER DO NOT store or use gasoline or other  cAUTION fl am
                    
                    Inhaltszusammenfassung zur Seite Nr. 6 
                    
                        INSTALLATION SITE INSTALLATION 300-TH/III 500-TH/III Cord Length Cord Length: 120V - 5 ft. (1524mm) 5 ft. (1524mm) 208-240V - 5 ft. (1524mm) 230V - 8 ft. (2438mm) 21" (532mm) Electrical  Pass-Through Connection Option Shown with  optional bumper 40-5/8" (1031mm) 16-13/16" (426mm) Cord Length: 5 ft. (1524mm) 26-9/16" (675mm) 18-1/16"  14-1/2"  (458mm) (368mm) Electrical  15-1/4" Connection (387mm) Pass-Through Option 40-5/8" (1031mm) 16-13/16" 300-th3 2011 lit (426mm) 21-7/8" (556mm) 16" (406mm) 
                    
                    Inhaltszusammenfassung zur Seite Nr. 7 
                    
                        INSTALLATION SITE INSTALLATION 750-TH/III 767-SK/III Cord Length 120V - 5 ft. (1524mm) 208-240V - 5 ft. (1524mm) 230V - 8 ft. (2438mm) 28-5/8" (726mm) 11-5/8"  (295mm) Pass-Through Option Electrical  Connection Electrical  Electrical  Connection Connection Shown with  Shown with optional bumper optional bumper Cord Length 230V - 8 ft. (2438mm) 208-240V - no cord or plug 31-5/8" (802mm) 25-11/16" (651mm) 28-9/16" (726mm) 34" (864mm) 26-3/4" (678mm) 31-5/8" (802mm) 17" (432mm) 25-3/4" (651mm) Elec
                    
                    Inhaltszusammenfassung zur Seite Nr. 8 
                    
                        INSTALLATION SITE INSTALLATION 1000-TH/III 1000-SK/III Cord Length 25-1/16" (636mm) 208-240V - 5 ft. (1524mm) 230V - 8 ft. (2438mm) Electrical  Pass-Through Option Connection Electrical  Connection Shown with  optional bumper Shown with  optional bumper Cord Length 230V - 8 ft. (2438mm) 208-240V - no cord or plug 22-1/2" (572mm) 31-5/8" (802mm) 25-1/16" (636mm) 34" (864mm) 23-1/2" (597mm) 31-5/8" (802mm) 22-1/2" (572mm) 17" (432mm) Electrical  Connection Pass-Through Option 20-1/2"  (521mm) 26-7
                    
                    Inhaltszusammenfassung zur Seite Nr. 9 
                    
                        INSTALLATION SITE INSTALLATION 1200-TH/III 1200-SK/III 25-1/16" (636mm) Electrical  Pass-Through Connection Option Electrical  Connection Shown with  optional bumper Shown with  optional bumper 32-1/4" (819mm) 31-5/8" (802mm) 22-1/2" (572mm) 25-1/16" (636mm) 34" (864mm) 31-5/8" (802mm) 22-1/2" (572mm) 17" (432mm) Electrical  Connection Pass-Through Option 20-1/2"  (521mm) 24-1/4" (613mm) 20-1/2"  24-1/4" (613mm) (521mm) 23-1/2" (597mm) 23-1/2" (597mm) *73-7/8" (1877mm) - with optional 3-1/2" cas
                    
                    Inhaltszusammenfassung zur Seite Nr. 10 
                    
                        INSTALLATION SITE INSTALLATION wEIgHT 1767-SK/III  MODeL  W net eiGht ship WeiGht  1767-SK/III 359 lb (163 kg) est 450 lb (204 kg) 28-5/8" (726mm) 11-5/8"  (295mm) pROdUcT\pAN cApAcITy ( p e R 	 c o M p a R T M e N T ) 100 lb (45 kg) maximum  Electrical  voluMe MaxiMuM: 53 quarts (67 liters) Connection Shown with  optional bumper 32-3/4" (832mm) 31-3/4" (807mm) 25-11/16" (651mm) 24-1/8" (613mm) 23-5/8" (600mm) 26-5/8" (676mm) *60-11/16" (1540mm) - with optional 3-1/2" (89mm) casters *62-1/8" (15
                    
                    Inhaltszusammenfassung zur Seite Nr. 11 
                    
                        INSTALLATION OpTIONS ANd  AccESSORIES 300-TH/III 500-TH/III 750-TH/III 1000-TH/III 1200-TH/III Bumper, Full Perimeter   5011161 5010371 5009767 5009767 — (Not available with 2-1/2" casters) Carving Holder  prime rib HL-2635 HL-2635 HL-2635 HL-2635 HL-2635  steamship (cafeteria ) round — 4459 4459 4459 4459 Casters - 2 rigid , 2 swivel w/brake  5" (127mm) — 5004862 5004862 5004862 5004862  3-1/2" (89mm) — standard standard standard standard  3" (76mm) 5015323 — — — —  2-1/2" (64mm) — 5008022 5008
                    
                    Inhaltszusammenfassung zur Seite Nr. 12 
                    
                        INSTALLATION STAcKINg INSTRUcTIONS 1) If the two appliances were shipped together from the factory, the top unit will have the casters  already removed. A stacking kit will be included with the shipment. If casters need to be removed: lay the unit on its back, and remove the set screw on each caster. Pull the casters  out of the unit. 2) while appliance is laid on its back, insert one stacking post in each of the four corners of the  upper unit. Secure the stacking posts using one screw and two 
                    
                    Inhaltszusammenfassung zur Seite Nr. 13 
                    
                        INSTALLATION SITE INSTALLATION A number of adjustments are associated with  RESTRAINT REQUIREMENTS  initial installation and start-up.  It is important  —MOBILE EQUIpMENT that these adjustments be conducted by a qualified  service technician.  Installation and start-up    wARNINg adjustments are the responsibility of the dealer  or user.  These adjustments include but are not  RISK OF ELEcTRIc SHOcK. limited to thermostat calibration, door adjustment,  Appliance must be secured  leveling, electr
                    
                    Inhaltszusammenfassung zur Seite Nr. 14 
                    
                        INSTALLATION SITE INSTALLATION  dRIp TRAy INSTALLATION INSTRUcTIONS - 500, 750, 1000, 1200 b a d c item Description Qty 1 Double-Sided Tape 1 2 Drip Tray Holder 1 3 8-32 x 1/4” Phil Screw 3 4 Drip Tray 1 1. Poke holes through double-sided tape  a which is attached to the back of drip tray holder b. 2. Remove backing on double-sided tape a. 3. Put  screws c through holes and attach drip tray holder b to unit. 4.  Optional, but strongly recommended - apply a line of food-grade silicone caulk along
                    
                    Inhaltszusammenfassung zur Seite Nr. 15 
                    
                        INSTALLATION ELEcTRIcAL cONNEcTION  The appliance must be installed by a qualified REGARDiNG iNTERNATiONAL STANDARD UNiTS:   service technician.  The oven must be properly  If the unit is not equipped with flexible cord and  grounded in accordance with the National  plug, an all-pole country approved disconnection  Electrical Code and applicable local codes. device which has a contact separation of at least  3mm in all poles must be incorporated in the fixed  Plug the unit into a properly ground
                    
                    Inhaltszusammenfassung zur Seite Nr. 16 
                    
                        INSTALLATION ELEcTRIcAL  300-TH/III 767-SK/III  v OLta Ge phase cyc Le /hz a Mps kW c Or D & p Lu G v OLta Ge phase cyc Le /hz a Mps kW c Or D & p Lu G  120 1 60 6.7 .80 NeMa 5-15p  208-240 1 60 16.0-18.5  3.9-4.4 cord , no plug       15a-125v plug  230 1 50/60 14.0 3.1 cee 7/7    230 1 50/60 2.7 .62 cee 7/7        220-230v plug       220-230v plug 1767-SK/III 500-TH/III  v OLta Ge phase cyc Le /hz a Mps kW c Or D & p Lu G  v OLta Ge phase cyc Le /hz a Mps kW c Or D & p Lu G  208-240 1 60 32.0-3
                    
                    Inhaltszusammenfassung zur Seite Nr. 17 
                    
                        OpERATION USER SAFETy INFORMATION The Alto-Shaam cook and hold oven is intended  cAUTION for use in commercial establishments by qualified  operating personnel where all operators are  METAL PARTS Of THiS EQUiPMENT  familiar with the purpose, limitations, and  bECOME EXTREMELY HOT WHEN  iN OPERATiON.  TO AVOiD bURNS,  associated hazards of this appliance.  Operating  ALWAYS USE HAND PROTECTiON  instructions and warnings must be read and  WHEN OPERATiNG THiS APPLiANCE. understood by all operators
                    
                    Inhaltszusammenfassung zur Seite Nr. 18 
                    
                        A B C D E F G H I OpERATION Power ON  indicator e h g i j k l b c d f m Upper   Cavity ON/Off n a Lower   o Cavity A B C D E F G H I ON/Off A B C D E F G H I Double  Compartment Control q p cONTROL FEATURES 1. ON/Off Key 10. LED Display   The ON/OFF control system key operates the   Indicates interior oven air temperature, internal  functions of the control panel.  If there is any power product probe temperature, time, or when used in  loss during operation, the on/off indicator light will conju
                    
                    Inhaltszusammenfassung zur Seite Nr. 19 
                    
                        OpERATION cook/Hold/Smoke Instructions Press and release control ON/Off key.  The oven will beep for one second and power to the unit will be  indicated by an illuminated green indicator light located in the upper left corner of the ON/OFF key.  The  oven will begin operating in the hold mode.  The amber hold indicator will be illuminated and the last set  hold temperature will be displayed. Set cook temperature — Press COOk Key.  Oven preheat indicator will illuminate and the last set cooking  
                    
                    Inhaltszusammenfassung zur Seite Nr. 20 
                    
                        OpERATION OpERATINg FEATURES & FUNcTIONS Power fail Detect: To stop an operation at any time : If the power were to fail for any reason while  Press and hold the s tart Key until the control beeps  heating, the control will retain, in memory, the  for two seconds, indicating the operation has been  programmed operating conditions.  When power  cancelled.  The oven will remain in a power-on  is restored, the control will resume operating from  state. the point where it was interrupted and the ON/