Manual de instrucciones de Nortel Networks Norstar M7100

Resumen del contenido incluido en la página 1

Enterprise Edge
M7100
Quick Reference Guide
© 2000 Nortel Networks
P0908511 Issue 03

Resumen del contenido incluido en la página 2

Resumen del contenido incluido en la página 3

Your Enterprise Edge M7100 telephone Release button cancels active calls Display shows the time, date, call information, and guides you. Memory button is programmable to store a feature or to automatically dial internal or external number. Dial pad Feature button starts or ends a feature. Volume control Hold button Using Button Inquiry Check what is programmed on your memory button. 1. Release all calls or lines with dial tone. 2. Press Ä¥â. 3. Press the button that you want to check. 4. Read th

Resumen del contenido incluido en la página 4

Making and answering calls Answering calls 1. When your telephone rings, lift your handset. You are immediately connected to the call. Making external calls Depending upon the dialling mode programmed for your telephone, you may be able to dial your call before lifting your handset. 1. Pick up the handset. 2. Dial â (your system’s exchange line access code or a line pool access code). 3. Dial the external telephone number. Making internal calls 1. Pick up the handset. 2. Dial the internal num

Resumen del contenido incluido en la página 5

Programming the memory button About the The memory button can store a memory button telephone number or feature code to give you one touch dialling or feature activation. You can change the memory button by programming it with a new number or feature code. Memory button Remember: Press Ä¥â to check a memory or line button. Programming the memory External Autodial button 1. If you are on a call or a line with dial tone, press ú or ¨. 2. Press Ä¥Ú. 3. Dial the external number. 4. Press ú

Resumen del contenido incluido en la página 6

Setting up the telephone ATTENTION Before attempting Connecting the cords to carry out any work on the telephone, ensure that the line cord is unplugged from the wall socket. To remove any of the cords, squeeze the release latch on the plug and gently pull the plug from the socket. Connect the handset cord to the Connect to jack from distribution block jack labelled with the telephone icon and route the cord as shown. Connect to receiver Route the line cord through the stand and con

Resumen del contenido incluido en la página 7

Setting up the telephone Mounting the telephone on the wall Page 5 Enterprise Edge M7100 Quick Reference Guide P0908511 Issue 03