Resumen del contenido incluido en la página 1
43-3529_3598.fm Page 1 Monday, April 28, 2003 1:38 PM
2.4 GHz Multi Handset Expandable
Cordless Telephone
with Call Waiting/Caller ID
43-3529/43-3598
Ample Talk and Standby Time — The supplied
battery (when fully charged) provides about six
hours of talk time or 10 days of standby time.
Headset Jack — Lets you connect an optional
headset for hands-free convenience. See “Using a
Headset” on Page 18.
Hearing-Aid Compatible — Enables use of the
phone with hear
Resumen del contenido incluido en la página 2
Important Safety Instructions 43-3529_3598.fm Page 2 Monday, April 28, 2003 1:38 PM CAUTION: TO REDUCE THE RISK OF ELECTRIC WARNING: To reduce the risk of fire or shock CAUTION SHOCK, DO NOT REMOVE COVER OR BACK. NO hazard, do not expose this product to rain or RISK OF ELECTRIC SHOCK ! USER-SERVICEABLE PARTS INSIDE. REFER moisture. SERVICING TO QUALIFIED PERSONNEL. DO NOT OPEN The lightning symbol is intended to alert you to the presence of uninsulated The exclamation sy
Resumen del contenido incluido en la página 3
43-3529_3598.fm Page 3 Monday, April 28, 2003 1:38 PM 10. Do not place this product on an unstable cart, CONTENTS stand, or table. The product may fall, causing (continued) serious damage to the product. Turning the Distinctive Ringer On/Off .................................. 23 Using Caller ID .................... 24 11. Slots and openings in the cabinet and the back Call Waiting Deluxe or bottom are provided for ventilation. To Service ............................ 24 protect the
Resumen del contenido incluido en la página 4
Important Safety Instructions 43-3529_3598.fm Page 4 Monday, April 28, 2003 1:38 PM Incorrect reassembly can cause electric shock when the product is subsequently used. 17. Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions: • When the power cord plug is damaged or frayed. • If liquid has been spilled into the product. • If the product has been exposed to rain or water. • If the product does not operate no
Resumen del contenido incluido en la página 5
43-3529_3598.fm Page 5 Monday, April 28, 2003 1:38 PM cause damage to the eyes or skin. It may be toxic if swallowed. •Exercise care in handling the battery pack in order not to short it with conducting materials such as rings, bracelets, and keys. The battery or conductor may overheat and cause burns. • Charge the battery pack only in accordance with the instructions and limitations specified in the instruction manual provided for this product. • Observe proper polarity orien
Resumen del contenido incluido en la página 6
Installing Your Telephone 43-3529_3598.fm Page 6 Monday, April 28, 2003 1:38 PM INSTALLING YOUR TELEPHONE SELECTING A LOCATION Ô NOTE Ô Select a location that is: The USOC number of the • near an accessible AC outlet jack to be installed is • near a telephone line jack Ô RJ11C (or RJ11W for a wall plate jack). • out of the way of normal activities •away from electrical machinery, electrical appliances, metal walls or filing cabinets, wireless intercoms, alarms, and
Resumen del contenido incluido en la página 7
43-3529_3598.fm Page 7 Monday, April 28, 2003 1:38 PM To put the phone on a slant, insert the clips into the middle clip slots. Then, tilt the bracket down so the tabs click into the upper tab slots. 2. Plug one end of the supplied long modular cord into the TEL LINE jack on the back of the base. 3. Plug the modular cord’s other end into a modular phone line jack. 4. Insert the " CAUTION " supplied AC You must use a Class 2 adapter’s barrel power source that supplies p
Resumen del contenido incluido en la página 8
Installing Your Telephone 43-3529_3598.fm Page 8 Monday, April 28, 2003 1:38 PM On a Wall Plate 1. Insert the bracket's tabs into the base's lower tab slots. Then, press down on the bracket's clips and insert them into the clip slots. " CAUTION " Always connect the AC adapter to the phone before 2. Plug one end of the supplied short modular you connect it to AC power. cord into the TEL LINE jack on the back of the When you finish, base. disconnect the adapter from AC p
Resumen del contenido incluido en la página 9
43-3529_3598.fm Page 9 Monday, April 28, 2003 1:38 PM On a Wall You need two screws (not supplied) with heads that fit into the keyhole slots on the bottom of the base. 15 1. Drill two holes 3 /16 inches (100 mm) apart. Then thread a screw into each hole, letting the 1 heads extend about /8 inch (3 mm) from the wall. 2. Plug one end of the supplied long modular cord into the TEL LINE jack on the back of the base. 3. Insert the supplied AC adapter's barrel p
Resumen del contenido incluido en la página 10
Installing Your Telephone 43-3529_3598.fm Page 10 Monday, April 28, 2003 1:38 PM 1. Press down and slide Ô NOTE Ô off the battery • If you mounted the base compartment cover. on the wall, place the 2. Plug the battery handset with the keypad pack’s connector into facing out so the charging contacts make a clean the socket in the connection to charge the compartment (the battery pack. connector fits only • Using a pencil eraser, one way). Then place the batter
Resumen del contenido incluido en la página 11
43-3529_3598.fm Page 11 Monday, April 28, 2003 1:38 PM SETTING THE DIALING MODE Your phone is set for tone dialing. If you have pulse service, change the dialing mode. If you are not sure which type of service you have, do this test: 1. Lift the handset and press TALK/FLASH. Listen for a dial tone. 2. Press any number other than 0 or an access code (9, for example) if required. 3. If the dial tone stops, you have touch-tone service. If the dial tone continues, you have pulse service.
Resumen del contenido incluido en la página 12
Installing Your Telephone 43-3529_3598.fm Page 12 Monday, April 28, 2003 1:38 PM 4. Press SEL/CH. The phone beeps. 5. Press END to exit. When you select RRRRiiiinnnnggggeeeerrrr OOOOffffffff, the phone does not ring when it receives an incoming call and <<<>>> appears on the handset when you make or receive calls, or place it on the base. SETTING THE RINGER TONE You can choose from six ringers or four melodies. Ringers: FFFFlllliiiicccckkkkeeee
Resumen del contenido incluido en la página 13
43-3529_3598.fm Page 13 Monday, April 28, 2003 1:38 PM 3. Press SEL/CH. 4. Press # or $ to select AAAAuuuuttttoooo TTTTaaaallllkkkk. 5. Press SEL/CH. 6. Press # or $ to choose AAAAuuuuttttoooo TTTTaaaallllkkkk OOOOnnnn or AAAAuuuuttttoooo TTTTaaaallllkkkk OOOOffffffff. 7. Press SEL/CH. A tone sounds. 8. Press END to exit. TURNING CALLER ID/CALL WAITING ON/OFF If you subscribe to Call Waiting with Caller ID service, you can set the phone to show Caller ID information for an
Resumen del contenido incluido en la página 14
Installing Your Telephone 43-3529_3598.fm Page 14 Monday, April 28, 2003 1:38 PM In some areas, the area code is necessary even for a local call (10-digit dialing). If you live in such an area, do not store the area code. 1. Lift the handset and press MENU/MUTE. 2. Press # or $ to select CCCCaaaalllllllleeeerrrr IIIIDDDD SSSSeeeettttuuuupppp. 3. Press SEL/CH. 4. Press # or $ to select AAAArrrreeeeaaaa CCCCooooddddeeee. 5. Press SEL/CH. Then enter your three-digit area code.
Resumen del contenido incluido en la página 15
43-3529_3598.fm Page 15 Monday, April 28, 2003 1:38 PM MAKING AND RECEIVING CALLS 1. To make a call, lift the handset and press TALK/ FLASH. TTTTaaaallllkkkk and the current volume setting Ô NOTE Ô appear, and the base's CHARGE/IN USE The phone has 35 indicator lights. Then the call's elapsed time channels. If your call appears. Ô disconnects or you have difficulty hearing the 2. Dial the number. The number appears on the conversation during a call, handset as you dial. press SEL/
Resumen del contenido incluido en la página 16
Making and Receiving Calls 43-3529_3598.fm Page 16 Monday, April 28, 2003 1:38 PM ADJUSTING THE HANDSET’S VOLUME To adjust the handset's volume during a call, press # or $ on the handset until you reach the desired volume level (VVVVoooolllluuuummmmeeee LLLLoooowwww, VVVVoooolllluuuummmmeeee MMMMeeeeddddiiiiuuuummmm, VVVVoooolllluuuummmmeeee HHHHiiiigggghhhh, and VVVVoooolllluuuummmmeeee MMMMaaaaxxxxiiiimmmmuuuummmm). Once you set the volume level, the setting is maintained ev
Resumen del contenido incluido en la página 17
43-3529_3598.fm Page 17 Monday, April 28, 2003 1:38 PM 2. Press TALK/FLASH again to return to the first call. If you do not have any special phone services, pressing TALK/FLASH while the call is in progress might disconnect the current call. USING TONE SERVICES ON A PULSE LINE Some special services require tone signals (such as bank-by-phone). If you have pulse dialing, you can still use these special tone services. 1. Dial the service’s main number. 2. When the service answers, press
Resumen del contenido incluido en la página 18
Voice Mail Waiting Indicator 43-3529_3598.fm Page 18 Monday, April 28, 2003 1:38 PM VOICE MAIL WAITING INDICATOR If you subscribe to the voice mail service from your phone company, the VOICE MAIL indicator on the handset flashes when you receive a new voice message. Call the access number to retrieve your voice mail. Then enter your personal ID to listen to the message. The VOICE MAIL indicator also flashes rapidly when you receive an incoming call, or slowly when the base is paging
Resumen del contenido incluido en la página 19
43-3529_3598.fm Page 19 Monday, April 28, 2003 1:38 PM You can also store one number in a separate one- touch speed dial memory. Each memory number can be up to 20 digits, and each name can be up to 16 characters. STORING/EDITING DATA IN THE PHONEBOOK 1. Lift the handset and press ê ê ê ê/SPEED DIAL/%. The number of records in the phonebook, SSSSeeeeaaaarrrrcccchhhh [[[[AAAA----ZZZZ////#////$]]]], and SSSSttttoooorrrreeee [[[[sssseeeelllleeeecccctttt]]]] appear. 2. Press SEL/CH. SS
Resumen del contenido incluido en la página 20
Memory Dialing 43-3529_3598.fm Page 20 Monday, April 28, 2003 1:38 PM 6. To enter a number, repeatedly press the corresponding number key until the number appears. 7. To enter a special character, press 0 repeatedly to select one of the following characters: ∗ #### ---- & (((( )))) (space) 0000 8. If you make a mistake, press ê ê ê ê/SPEED DIAL/% to move the cursor back to the incorrect entry, press DEL/TRSF to delete the wrong character. Then enter the correct cha
