Resumen del contenido incluido en la página 1
43-3824.FM Page 1 Friday, February 28, 2003 6:50 PM
2.4GHz Cordless Phone
with Caller ID and Digital Answering System
43-3824
20 Number Memory Dialing — stores 20
numbers in memory for easy dialing. See
“Memory Dialing from Talk Mode” on
Page 20.
Long Battery Life — the supplied battery
pack (when fully charged) provides about 7
hours of talk time or 14 days of standby time.
20 Channels — automatically selects a clear
channel when you make or answer a call. You can
also manually change
Resumen del contenido incluido en la página 2
Important Safety Instructions 43-3824.FM Page 2 Friday, February 28, 2003 6:50 PM WARNING: To reduce the risk of fire or shock hazard, do not expose this product to rain or moisture. CONTENTS CAUTION: TO REDUCE THE RISK OF ELECTRIC Important Safety Instructions 2 .CAUTION. SHOCK, DO NOT REMOVE COVER OR BACK. NO USER-SERVICEABLE PARTS INSIDE. REFER Battery SafetyInstructions .... 4 RISK OF ELECTRIC SHOCK ! SERVICING TO QUALIFIED PERSONNEL. DO NOT OPEN Introduction ........................
Resumen del contenido incluido en la página 3
43-3824.FM Page 3 Friday, February 28, 2003 6:50 PM 11. Slots and openings in the telephone’s cabinet CONTENTS and the back or bottom are provided for (continued) ventilation. To protect the telephone from Deleting the Speed Dial .. 23 Caller ID ............................. 24 overheating, these openings must not be When the Telephone Rings .............................. 24 blocked or covered. The openings should never Viewing the Caller ID be blocked by placing the product on a bed,
Resumen del contenido incluido en la página 4
Battery Safety Instructions 43-3824.FM Page 4 Friday, February 28, 2003 6:50 PM • If the product has been exposed to rain or water. • If the product does not operate normally by following the operating instructions. 18. Adjust only those controls that are covered by the operating instructions because improper adjustments of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to normal operation. 19. If the product
Resumen del contenido incluido en la página 5
43-3824.FM Page 5 Friday, February 28, 2003 6:50 PM • Charge the battery pack provided with or identified for use with this product only in accordance with the instructions and limitations specified in the instruction manual provided for this product. • Observe proper polarity orientation between the battery pack and battery charger. SAVE THESE INSTRUCTIONS INTRODUCTION Thank you for purchasing a RadioShack 900 MHz IMPORTANT ! ! Cordless Telephone. Your telephone provides Cordless pho
Resumen del contenido incluido en la página 6
Important Caller ID Information 43-3824.FM Page 6 Friday, February 28, 2003 6:50 PM • caller’s number only • caller’s name only • caller’s name and number If you subscribe to Call Waiting ID and Caller ID, the system can show you the incoming caller information, even when you are already talking on the phone. READ THIS BEFORE INSTALLATION We have designed your phone to conform to federal regulations and you can connect it to most phone lines. However, each device that you connect to the
Resumen del contenido incluido en la página 7
43-3824.FM Page 7 Friday, February 28, 2003 6:50 PM INSTALLATION MOUNTING THE PHONE You can place the phone on a desk or table, mount CAUTION it on a standard wall plate, or directly on a wall. You must use a Choose a location that is: Ô ! Class 2 power source that • near an AC outlet supplies 9V DC and • near a modular telephone line jack delivers at least 350 mA. Its center tip must be set • out of the way of normal activities to positive and its plug • away from electrical
Resumen del contenido incluido en la página 8
Installation 43-3824.FM Page 8 Friday, February 28, 2003 6:50 PM 3. Insert the supplied AC adapter’s barrel plug into the DC IN 9V jack on the back. 4. Route the adapter’s cord through the strain relief slot on the base’s bottom. 5. Plug the adapter into a standard AC outlet. 6. Lift the base’s antenna to a vertical position. On a Wall Plate or Wall To mount the phone directly on a wall, you need two screws (not supplied) with heads that fit into the 15 keyhole slots on the base. Drill tw
Resumen del contenido incluido en la página 9
43-3824.FM Page 9 Friday, February 28, 2003 6:50 PM 5. For a wall plate, plug the modular cord’s other end into the wall plate jack, then align the base’s keyhole slots with the wall plate studs and slide the base downward to secure it. For direct wall mounting, align the base’s keyhole slots with the mounting screws and slide the base downward to secure it. 6. Plug the adapter into a standard AC outlet. 7. Press and lift out the handset holder, flip it over as shown, then snap it
Resumen del contenido incluido en la página 10
Installation 43-3824.FM Page 10 Friday, February 28, 2003 6:50 PM 3. Plug the battery pack’s IMPORTANT ! ! connector into the socket in Be sure the battery pack is the compartment. The properly connected before connector fits only one way. you try to charge it. The CHARGE indicator lights 4. Put the battery pack in the when the handset is on the compartment. base even if the battery pack is not connected 5. Replace the cover. properly. To charge the battery pack, place the handset
Resumen del contenido incluido en la página 11
43-3824.FM Page 11 Friday, February 28, 2003 6:50 PM Recycling Ni-Cd Batteries. ® The EPA certified RBRC Battery Recycling Seal on the nickel-cadmium (Ni-Cd) battery indicates RadioShack is voluntarily participating in an industry program to collect and recycle these batteries at the end of their useful life, when taken out of service in the United States or Canada. The RBRC program provides a convenient alternative to placing used Ni-Cd batteries into the trash or the municipal wast
Resumen del contenido incluido en la página 12
Installation 43-3824.FM Page 12 Friday, February 28, 2003 6:50 PM 3. Press end and return the handset to the base Ô NOTE Ô unit to complete the setting. The handset returns to the standby mode. Caller ID Options • If your calling area To enter your Area Code Ô requires 10-digit dialing, do not program this If you enter a 3-digit area code number in the AAAArrrreeeeaaaa option. CCCCooooddddeeee option, your local area code does not appear • When the area code has in Caller ID messa
Resumen del contenido incluido en la página 13
43-3824.FM Page 13 Friday, February 28, 2003 6:50 PM 2. Press VOL/ three times to select DDDDiiiiaaaallll. 3. Press SEL to toggle between TTTToooonnnneeee and PPPPuuuullllsssseeee. 4. Press end or return the handset to the base unit to complete the setting. The handset returns to the standby mode. Setting the Language 1. When the phone is in the standby mode, Press and hold CID/MENU. 2. Press VOL/ four times to select LLLLaaaannnngggguuuuaaaaggggeeee. 3. Press SEL to toggle between EEEE
Resumen del contenido incluido en la página 14
Operation 43-3824.FM Page 14 Friday, February 28, 2003 6:50 PM OPERATION MAKING AND RECEIVING CALLS Even when you turn off the base’s ringer, you can still make or receive calls using this phone. Telephones on the same line and the handset (if its ringer is not turned off) still ring when there is an incoming call. Action Handset On Base Handset Off Base Pick up the handset Press talk/FLASH, Ô NOTE Ô To (Auto Talk: On),Ô or any number, ∗/TONE/ receive pick up the handset or #/(Auto Ta
Resumen del contenido incluido en la página 15
43-3824.FM Page 15 Friday, February 28, 2003 6:50 PM ADJUSTING THE HANDSET RINGER AND EARPIECE VOLUME Handset Ringer Tone and Volume Press VOL/ or VOL/ in standby mode to select one of five ringer tones and volume combinations. Earpiece Volume Pressing VOL/ or VOL/ during a call will change the earpiece volume of the handset. This setting will remain in effect after the telephone call has Ô NOTE Ô ended.Ô Earpiece Volume When you press VOL/ in Temporarily Mute Ringer Maximum mode or
Resumen del contenido incluido en la página 16
Operation 43-3824.FM Page 16 Friday, February 28, 2003 6:50 PM pass the range limits of the base unit, your call will terminate within 1 minutes. SELECTING A DIFFERENT CHANNEL If you encounter interference while using your phone, you can manually change the phone’s channel for clear operation. This function works only when the phone is in use. Press DELETE/CHANNEL.SSSSccccaaaannnnnnnniiiinnnngggg appears on the display, indicating the phone is changing to another channel. Ô NOTE Ô PAGE
Resumen del contenido incluido en la página 17
43-3824.FM Page 17 Friday, February 28, 2003 6:50 PM 4. Press MEM or SELECT. A cursor flashes indicating that the display is ready for the name to be entered. IfEEEEddddiiiitttt MMMMeeeemmmmoooorrrryyyyXXXXXXXX appears, the selected memory location is already stored. Then you must either edit the entry in this location, delete the entry in this location, or select GGGGoooo BBBBaaaacccckkkk to choose another location. 5. To enter a name (up to 13 characters), use number keys. • See
Resumen del contenido incluido en la página 18
Operation 43-3824.FM Page 18 Friday, February 28, 2003 6:50 PM • Use DELETE/CHANNEL to delete digits as needed. 8. Press MEM or SELECT.You will hear a confirmation tone.Ô Memory storage is complete. For example, if you store a name and number into memory location number 01, the display shows MMMMeeeemmmmoooorrrryyyy00001111 SSSSttttoooorrrreeeedddd. After about 2 seconds, the Select Memory Screen is displayed. Repeat steps 2 - 8 to store more numbers. 9. Press end to return to standby
Resumen del contenido incluido en la página 19
43-3824.FM Page 19 Friday, February 28, 2003 6:50 PM character. To delete all characters, press and hold DELETE/CHANNEL. Ô NOTE Ô For example, to enter John; Ô If the next character uses the same number key, you 1. Pick up the handset. Press MEM. must press #/ to move the cursor over. Otherwise the 2. Enter a number or press VOL/ or VOL/ to next time you press the select a memory location number. number key, it changes the character that was 3. Press MEM or SELECT. previously set
Resumen del contenido incluido en la página 20
Operation 43-3824.FM Page 20 Friday, February 28, 2003 6:50 PM Memory Dialing from Talk Mode Ô NOTE Ô 1. Press talk/FLASH.TTTTaaaallllkkkk and the volume setting appears. • If you press SELECT before talk/FLASH, you 2. Press MEM. can confirm the name and the number stored 3. Press VOL/ or VOL/, or Enter a number in the selected memory (01 - 20) to select the memory location of the location. desired phone number. If you press SELECT, • To exit the memory the number is dialed. Ô func
