Resumen del contenido incluido en la página 1
#
OPERA TING RANGE
This cordless telephone operates at the maximum power allowed
If you move out of range while on a call, the phone will be left
by the Federal Communications Commission (FCC). Even so, the
“off the hook.” To hang up properly, walk back into range,
handset and base can communicate over only a certain
periodically pressing P until the PHONE light goes off.
distance — which can vary with the locations of the base and hand-
set, the weather, and the construction of your home or o
Resumen del contenido incluido en la página 2
INST AL LA TION AC Adapter Modular Jack PULSE/TONE Switch Telephone Line Cord Power Cord face down in the base if your phone is installed on a FOR TABLE/DESK INSTALLATION wall. (The handset charges only face-down when the 1 Choose a spot near an electrical outlet and a base is wall-mounted.) The CHARGING light on the telephone jack. This phone requires a modular base goes on to show the handset is in the right position telephone jack and a standard electrical outlet (110v AC). to charge the b
Resumen del contenido incluido en la página 3
INST ALLA TION Power cord Channel on base Push in on the two tabs at Wrap any excess line cord Guide the power cord the large end of the around the 4 tabs on the from the jack through the triangular mounting underside of the phone base. channel on the base. bracket. Feed the free end of the Turn the mounting Slide the base down line cord through the bracket so the double onto the knobs until it rectangular opening in the slot is at the bottom. locks in place. center of the bracket. 6 Guide the p
Resumen del contenido incluido en la página 4
OPERA TION Making a Call Temporary Tone 1 Press P, and wait for the PHONE light to go on NOTE: If you have touch tone service, you don’t need to use steadily. the Temporary Tone feature. 2 When you hear a dial tone, dial the number. (For If you have dial pulse (rotary) service, this feature allows you information about the Display Dial feature, see the to enter codes or tones needed to operate answering machines, CALLER ID section of this manual). or use electronic banking services, calling ca
Resumen del contenido incluido en la página 5
OPERA TION Timer Flash The screen displays the elapsed time of the call in hours, min- Press F to activate custom-calling services such as Call utes and seconds (up to 9 hours, 59 minutes, 59 seconds). The Waiting or 3-Way Calling. You may have to press other but- timer appears on the screen fifteen seconds after the last digit is tons before or after F as explained in custom-calling dialed, and remains on the screen for the duration of the call. instructions provided by your local telephone s
Resumen del contenido incluido en la página 6
TELEPHONE MEMOR Y This cordless phone can store 20 telephone numbers and names To enter subsequent letters from the same key (for that you dial just by pressing p and two of the number example, e and f), use > to move the cursor to the buttons. The telephone memory works with the Memory Match next space. and Priority Ring features. When you receive a call from a 5 Press and release p. number you’ve stored in memory, the screen displays the name 6 Press the number buttons (01 to 20) for the m
Resumen del contenido incluido en la página 7
TELEPHON E MEMOR Y Storing a Pause in a Memory Dial Number Reviewing Memory Numbers When storing a number in memory, press and hold down the 1 Press p. number button that comes before the pause, until you hear the 2 Press m. second beep. This inserts a 2-second pause after that digit. If 3 Press + or - to scroll through memory locations and you hold the number button down longer, you will hear more view numbers (press > to view a name after a beeps as additional pauses are stored. displayed n
Resumen del contenido incluido en la página 8
CALLER ID OPERA TION Caller's name Caller's telephone number Voice mail message waiting Battery status indicator (with paid service of telephone New call information This telephone number has company voice mail) in call history since been stored as a VIP you last reviewed Select Display Screen Language About Caller Identification 1 Press and release m. The screen displays the This telephone is designed to store and display information about currently selected language. incoming telephone calls.
Resumen del contenido incluido en la página 9
CALLER ID OPERATION Program Area Codes Reviewing Call History You must program the system to recognize your home area code in The screen displays call information for about 15 order to use the Display Dial feature described later in this section. seconds after it has been received. 1 Press I. The screen displays the number of After programming your home area code, the screen displays new calls, or No New CID and the total number of the 7 digits of the number (without the area code) when you cal
Resumen del contenido incluido en la página 10
BA TTERIES CAUTION: To reduce the risk of fire or injury to Charging the Handset Battery Pack persons or damage to the telephone, read and follow The batteries need charging when: these instructions carefully. • The phone beeps four times when you press P. • Use only Replacement Battery 4051. • The battery icon is empty on the handset screen. • Do not dispose of the battery in a fire. The cell • The phone does not respond when you pressP, might explode. Check with local codes for special and
Resumen del contenido incluido en la página 11
IN CASE OF DIFFICULTY If you have difficulty operating this phone, try the suggestions If you have no dial tone below. If you still have trouble, call 1 800 722-9125. Check all the previous suggestions. If you still do not hear a dial tone, disconnect the phone and try another phone in the If the phone does not work at all, same jack. If there is no dial tone on that phone either, the problem is probably in your wiring or local service. Call your check these items first local telephone servi
Resumen del contenido incluido en la página 12
IN CASE OF DIFFICULTY The caller's name or phone number The caller's name or phone number is not displayed is not displayed during Call Waiting • Make sure you subscribe to Caller ID service or • Make sure you subscribe to the combined Caller ID Caller ID Name and Number service from your local service with Call Waiting. telephone company. • The screen will not display the call information if • Caller ID service might not work when the phone is someone is on an extension phone. connected to a Pr
