Resumen del contenido incluido en la página 1
User’s manual
SL82118/SL82218/SL82318/
SL82418/SL82518/SL82558/
SL82658
DECT 6.0 cordless
telephone/answering system
with caller ID/call waiting
Resumen del contenido incluido en la página 2
Congratulations on your purchase of this AT&T product. Before using this AT&T product, please read the Important safety information on pages 62-64 of this manual. Please thoroughly read this user’s manual for all the feature operations and troubleshooting information necessary to install and operate your new AT&T product. You can also visit our website at www.telephones.att.com or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268. Model #: SL82118 (single handset)/SL82218 (two h
Resumen del contenido incluido en la página 3
Parts checklist Your telephone contains the following items. User’s manual Quick start guide SL82118/SL82218/SL82318/ SL82118/SL82218/SL82318/ SL82418/SL82518/SL82558/ SL82418/SL82518/SL82558/ SL82658 SL82658 DECT 6.0 cordless DECT 6.0 cordless telephone/answering system telephone/answering system with caller ID/call waiting with caller ID/call waiting User's manual Quick start guide Cordless handset Telephone base with (1 for SL82118) mounting bracket, (2 for SL82218) telephone line
Resumen del contenido incluido en la página 4
User’s manual SL82118/SL82218/SL82318/ SL82418/SL82518/SL82558/ SL82658 DECT 6.0 cordless telephone/answering system with caller ID/call waiting Table of contents Getting started Caller ID Quick reference guide Caller ID operation ..........................37 handset handset ............................................3 To review the caller ID telephone base ............................4 history ..............................................40 Installation preparation ...........
Resumen del contenido incluido en la página 5
Table of contents Appendix G, FCC Part 68 and ACTA ................................................65 Appendix H, FCC Part 15 ......67 Appendix I, Limited warranty .........................68 Appendix J, Technical specifications ................................71 Appendix K, Troubleshooting ..........................72 Index ...................................................80
Resumen del contenido incluido en la página 6
Getting started Quick reference guide - handset CHARGE indicator On when the handset is charging in the telephone base MENU/SELECT or charger. Press to display the menu. DIR / CID While in the menu, press to Press DIR to display select an item or save an entry directory entries (page 34). or setting. Press to scroll up while in DELETE/MUTE menus. While entering names or During a call, press to mute numbers, press to move the microphone (page 25). cursor to the right. While r
Resumen del contenido incluido en la página 7
Getting started Quick reference guide - telephone base IN USE indicator • On when the handset is in use, when the answering system is VOICEMAIL indicator answering an incoming call or when you are Flashes when you have registering a handset. new voice mail. Voicemail • Flashes when another is provided by your local telephone is in use telephone company. on the same line, or It is different from the you are deregistering answering system on the handset(s) from the telephone base
Resumen del contenido incluido en la página 8
Getting started Installation preparation You must install and See page 8 charge the battery before for easy instructions. STOP! using the telephone. If you subscribe to high-speed Internet service (Digital Subscriber Line - DSL) through your telephone lines, you must install a DSL filter between the telephone base and the telephone wall jack (see the following page). The filter will prevent noise and caller ID problems caused by DSL interference. Please contact your DSL service provider for
Resumen del contenido incluido en la página 9
Getting started Telephone base & charger installation Install the telephone base as shown below. Make sure that the electrical outlet is not controlled by a wall switch. If you subscribe to high-speed Internet service (Digital Subscriber Line - DSL) through your telephone lines, you must install a DSL filter between the telephone base and the telephone wall jack. The filter will prevent noise and caller ID problems caused by DSL interference. Please contact your DSL service provider for m
Resumen del contenido incluido en la página 10
Getting started Telephone base & charger installation Charger installation Plug the power adapter into an electrical outlet. IMPORTANT INFORMATION 1. Use only the power adapter(s) supplied with this product. To order a replacement power adapter, visit our website at www.telephones.att.com, or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268. 2. The power adapters are intended to be correctly oriented in a vertical or floor mount position. The prongs are not designed to hold the plug
Resumen del contenido incluido en la página 11
Getting started Battery installation & charging Install the battery as shown below. After installing the battery, you can make and receive short calls, but replace the handset in the telephone base or charger when not in use. For optimal performance, charge the handset battery for at least 16 hours before use. When fully charged, the handset battery provides approximately five hours of talk time or three days of standby time. Step 1 Step 2 Step 3 Press the depression Plug the battery secu
Resumen del contenido incluido en la página 12
Getting started Belt clip & optional headset To attach the belt To remove the belt clip: clip: Gently lift either of the Snap the belt clip belt clip retaining tabs, into the retaining tabs shown in the figure, on both sides of the outwards to remove handset as shown in the the belt clip from the figure. handset. For handsfree telephone conversations, you can use any industry standard 2.5 mm headset (purchased separately). For best results, use an AT&T 2.5 mm headset. To purchase a h
Resumen del contenido incluido en la página 13
Getting started Mounting bracket procedure The telephone base comes with the mounting bracket installed for desktop use. Wall mounting requires a telephone outlet wall mounting plate with mounting studs that may require professional installation. You can purchase the mounting plate from many hardware or consumer electronics retailers. NOTE: The mounting bracket must be used for both tabletop and wall mounting positions. Desktop to wall mount installation To change the telephone base to the
Resumen del contenido incluido en la página 14
Getting started Mounting bracket procedure Desktop to wall mount installation 4. Tilt the top of the bracket away from you until it is resting on the telephone base. 5. Align the grooves of the bracket with the upper keeper tabs on the telephone base. Make sure the cords are pointing towards you as shown in Figure 4. Upper keeper tabs Figure 4. Upper keeper tab location 6. Slide the bracket away from you until it clicks into the keeper tabs. Figure 5. Upper keeper tab location 11
Resumen del contenido incluido en la página 15
Getting started Mounting bracket procedure Desktop to wall mount installation 7. Align the holes on the telephone base with the standard wall plate and slide the bracket until the telephone is secured as shown in Figure 6. Figure 6. Wall mount position 8. Raise the antenna. 12
Resumen del contenido incluido en la página 16
Getting started Mounting bracket procedure Wall mount to desktop installation To change the telephone base to the desktop position: 1. Remove the telephone base from the wall. 2. Place the telephone base on a flat surface with the antenna on the left side as shown in Figure 7. Antenna Figure 7. Wall mounting bracket location 13
Resumen del contenido incluido en la página 17
Telephone operation Mounting bracket procedure Wall mount to desktop installation 3. Position your hands as shown in Figure 8. Press your thumbs down on the tabs that are below the bracket, holding it in place. Use your index fingers to move the bracket towards yourself. Figure 8. Detaching the bracket from the telephone base 4. Tilt the top of the bracket towards you until it is resting on the telephone base. 5. A Alliig gn n t th he e g gr ro oo ov ve es s o off t th he e b br ra ac ck ke
Resumen del contenido incluido en la página 18
Telephone operation Mounting bracket procedure Wall mount to desktop installation 6. S Slliid de e t th he e b br ra ac ck ke et t a aw wa ay y ffr ro om m y yo ou u u un nt tiill iit t c clliic ck ks s iin nt to o t th he e k ke ee ep pe er r t ta ab bs s.. Figure 10. Lower keeper tab location 7. R Ro ou ut te e t th he e t te elle ep ph ho on ne e lliin ne e c co or rd d a an nd d t th he e p po ow we er r a ad da ap pt te er r t th hr ro ou ug gh h t th he e s sllo ot ts s o on n t th he e br
Resumen del contenido incluido en la página 19
Handset settings Handset settings Using the feature menu, you can customize many of the telephone’s settings. 1. Press MENU/SELECT when in idle mode (when the phone is not in use) to enter the feature >DIRECTORY menu. CALL LOG 2. Use DIR / CID to scroll to the feature to be changed. When scrolling through the menu, the top menu item is always highlighted with a > symbol. 3. Press MENU/SELECT to select the highlighted item. NOTE: Press OFF/CLEAR to cancel an operation, back up to th
Resumen del contenido incluido en la página 20
Handset settings Handset settings Ringer tone This feature allows you to choose one of 10 ringer tones. >DIRECTORY CALL LOG To choose a ringer tone: 1. Press MENU/SELECT when in idle mode to enter the feature menu. 2. Use DIR / CID to scroll to >RINGER TONE, >RINGER TONE then press MENU/SELECT. KEY TONE 3. Press DIR / CID to get to the next ringer tone and to hear a sample of it. RINGER TONE 4. Press MENU/SELECT to save your preference and 1 return to the feature menu. Key tone The han