Resumen del contenido incluido en la página 1
OWNER'S MANUAL
61CM CORDLESS REMOTE COLOUR TELEVISION
MODEL: 6158
Type Tested
Electrical
Safety
AS/NZS 3250 Lic 4165
Standards Australia
APP No: N16712
PALSONIC CORPORATION PTY LTD
1 JOYNTON AVENUE
WATERLOO NSW 2017 AUSTRALIA
TEL:(02)9313 7111
FAX:(02)9313 7555
www.palsonic.com.au
PALSONIC CUSTOMER SERVICE
TELEPHONE
AUSTRALIA:1300 657 888
Resumen del contenido incluido en la página 2
Congratulations on your purchase of this Palsonic colour television receiver. We recommend that you thoroughly read this manual before use to fully enjoy the many functions and excellent effects of this receiver. Retain is manual in an easily accessible location for future reference. Contents Main features ............................................................................................................. 2 Notes for operation ............................................................
Resumen del contenido incluido en la página 3
Main features . Hyperband. . Auto/manual search. . 100 preset channels. . Multi-system: PAL-B/G, NTSC-4.43/3.58 (AV). . No-signal blue background display and AUTO-POWER-OFF function. . Four picture mode settings. . Sound mute function. . Sleep timer. . AV IN/OUT, S-VHS operation function. 2
Resumen del contenido incluido en la página 4
NOTES FOR OPERATION * Do not let the TV set be in standby condition for a long period of time. When it is not in use, please turn off the power supply and remove the power plug. When it is to be left for a prolonged period of time, it is recommended to disconnect the connection to the outdoor aerial, to avoid thunder strike. * Please follow cautions for safety in the TV set instructions, and all warnings and descriptions denoted on the TV set. Cautions For Safety Note: This TV set c
Resumen del contenido incluido en la página 5
Installation and appearance Antenna connection To ensure a bright - coloured and clear picture, you should use an outdoor aerial or CATV cable. If the signals are strong enough, you may use an indoor aerial. Note: In case of using the Twin-lead aerial feeder (300 ) for UHF/VHF aerial, use a 300-75 ohm adaptor (not supplied) When using the coaxial cable (not supplied) (75 ) for UHF/VHF aerial, connect the plug into the 75 ohm aerial socket directly. Note: When you connect the outdoor aerial c
Resumen del contenido incluido en la página 6
Appearance Front view POWER SWITCH INDICATOR CH (UP) INDICATOR VOL+ (UP) REMOTE SENSOR CH (DOWN) MENU VOL- (DOWN) TV/AV Back view ANTENNA INPUT AV1 IN AV OUT (VIDEO, AUDIO L/MONO R) (VIDEO, AUDIO L/MONO R) S-VHS IN AV2 IN (VIDEO, AUDIO L/MONO R) 5
Resumen del contenido incluido en la página 7
The remote controller Standby Sound mute TV/AV select Previous channel On screen recall Channel direct select Colour system select Picture control Sleep timer Picture mode selection Volume control *Sound system select Channel select * NOTE: this TV model's RF sound system is BG only. Therefore the SYS1/2 button on the remote controller is ineffective in sound system selection. Similarly in the Preset and Function menus the SYS item (sound system selection item) is ineffective. 6
Resumen del contenido incluido en la página 8
Operation Turning the power on/off 1. Connect the power, push the main power switch, the red indicator is on, the set is in standby mode. 2. Push the button on the remote controller to turn on the set when the set is in standby, this time, the green indicator is on, on the upper right corner of the screen will display channel number, colour and sound system. Or you can push the CH button to turn on the set when in standby. 3. You can push the button to switch the set to st
Resumen del contenido incluido en la página 9
1. PICTURE menu Making use of the PICTURE menu can adjust the picture effect according to your personal preference and it will be stored as picture memory mode automatically. Press the CH button to select the item (the selected item is highlighted in red). Press the VOL button to adjust it. The range is 0-63. Press the MENU button to exit to the main menu. Below are the characteristics of the picture adjustment item. OSD Green bar moving Pressing VOL VOL Item Brighter (BRIGH
Resumen del contenido incluido en la página 10
Making use of the PRESET menu can fulfil the function of auto-search, search. manual search , channel and band selection. AFT and skip on/off. Press CH button to select the item. (the selected item is highlighted in red). Press the MENU button to exit to the main menu. 1) PROG (program) Select the current program number while "PROG" is highlighted. Press VOL button to increase or decrease the program number progressively. 0 1 2 PROG 99 2) SKIP-ON/OFF Press CH button
Resumen del contenido incluido en la página 11
6) Auto - search (AUTO) Press CH button to highlight AUTO. Press VOL button the set will automatically search and store the active TV signals in your local area from lower band to higher band in the sequence of VL VH U with the green bar moving rightward. When a station is located, the set will store the signals with a channel number from 0. When all the signals are searched and stored, the TV returns to 0 channel automatically, auto-search is finished. * After auto-se
Resumen del contenido incluido en la página 12
Press CH button to select item (the selected item is highlighted). Press MENU button to exit to the main menu. 1) STD (colour system) selection. In this TV model the colour system is automatically identified. In normal circumstances, please set colour system to AUTO. 2) SYS (sound system) selection. In this TV model this item is ineffective. (Refer to the NOTE on page 6) 3) BLUE ON/OFF selection. Select and highlight BLUE ON/OFF. Press VOL button to select ON or OFF. When "BL
Resumen del contenido incluido en la página 13
Picture and volume adjustment 1. Picture adjustment Press PIC button repeatedly, on-screen display will change in the sequence below BRIGHTNESS CONTRAST COLOUR SHARPNESS PAL BRIGHTNESS CONTRAST COLOUR TINT SHARPNESS NTSC Press VOL button to adjust the level. For example, to adjust brightness: Press "PIC" Press " " After 4 seconds BRIGHTNESS 30 BRIGHTNESS 63 llll....... lllllllllll Press " " BRIGHTNESS 0 l.......... (Note: this button’s functio
Resumen del contenido incluido en la página 14
Picture mode selection You can select the picture quality instantly among three presets modes and one user-set mode. Press the button to select the desired picture quality. DYNAMIC, STANDARD, MILD and MEMORY (user-set) can be selected cyclically. MEMORY DYNAMIC STANDARD MILD Item Output Brightness Colour Contrast Tint Sharpness Mode DYNAMIC 31 31 47 31 31 STANDARD 31 31 31 31 31 MILD 31 31 21 31 31 MEMORY The picture quality you set Other functions 1. Retain on-screen display + Press the
Resumen del contenido incluido en la página 15
VERTICAL COLOR COLOR SYSTEM FREQUENCY SUB-CARRIER PAL(RF/VIDEO) 4.43MHz 50Hz AUTO NTSC 3.58 (VIDEO) 3.58MHz 60Hz PAL(RF/VIDEO) 50Hz PAL 4.43MHz PAL-60(RF/VIDEO) 60 Hz 60 Hz NTSC3.58 (VIDEO) 3.58MHz N358 60 Hz NTSC4.43(VIDEO) 4.43MHz N443 3. SLEEP timer Using the SLEEP button allows you to have the appliance automatically turned off after a preset time (the time range will be as long as 120 minutes) , and set the appliance to standby mode. At every press of the button the setting time will be dec
Resumen del contenido incluido en la página 16
12 AV1 AV2 AUTO AUTO After 4 AUTO seconds Press AV Press AV Press AV Note: S-VHS IN and AV2 use the same interface. If you want to receive signals input through S-VHS terminal, switch the set to AV2, the S-VHS (S-VIDEO) input terminal has priority over the AV2 VIDEO terminal; To use equipment connected to the AV2 VIDEO IN terminal, disconnect any plug from the S-VHS terminal. S-VHS and AV2 use the same group of AUDIO IN terminals. 1) When receiving broadcasting TV program (the TV signals are i
Resumen del contenido incluido en la página 17
To S-VHS output terminal To audio outputs External equipment connection This set is incorporated with Audio & Video input and output terminals which allows direct connection to external equipments (such as VCR, Video DISC, VCD, Satellite Receiver etc.) for playing back and recording the programs. 1. Video playback If your video equipment has a S-VHS output terminal, connect it to the S-VHS input terminal (special S-VIDEO type) of the set and connect audio line to AV2 AUDIO IN terminal. If not, c
Resumen del contenido incluido en la página 18
2. Recording 2.1 According to the following figure connect the TV set to the VCR. (Y) YELLOW (VIDEO) (W) WHITE (AUDIO, L/MONO) (R) (AUDIO, R) 2.2 When recording, set the TV on the desired channel, the program recorded is the program displayed on the screen. 17
Resumen del contenido incluido en la página 19
Troubleshooting Symptoms Check the following items The set cannot be turned . Be sure the power cord is plugged in or the AC on, red indicator is off socket is damaged. . Poor colour, poor tint Contrast, colour, tint are not correctly adjusted. Spots appear on the . Possible interferences of automobiles, motorcycle, screen trolley bus, neon lamps, etc. . Possible interferences of electronic interference from Stripes appear on the another TV set, a computer, electronics game machine, screen a bro
Resumen del contenido incluido en la página 20
Specifications AC 240V, 50Hz Power supply: VHFL 0~5, 5A; VHFH 6~11; UHF E21-E69 Receiving channel: PAL-B/G, PAL-60, NTSC 3.58 /4.43 (AV) TV system: 720 (W) x 510.5 (H) x 452 (D) Dimension(mm): 35kg Weight: 61cm Diagonal, blackstripe picture tube CRT: 120W Power consumption: 75 ohm Antenna impedance: 4W x 2 Sound output: one remote controller Accessories: Note : Design and specifications are subject to change without notice. 19
