Resumen del contenido incluido en la página 1
Colour Television
34PT5633
Instructions for use
3139 125 26952
Resumen del contenido incluido en la página 2
PHILIPS 2 2 INSTALLATION 2 Positioning of the TV set 5 cm • Place TV set on a solid base (e.g. a TV/Video cabinet) • Leave at least 5 cm around each side of TV set for 5 cm 5 cm ventilation to avoid over-heating. ÷ ÷ • Do not place TV set near a radiator or other sources of heat. PHILIPS • Do not place TV set where it can be exposed to rain or excessive moisture. Antenna Connection • Connect the aerial plug to the antenna socket ÂÂÂÂÂ on the backcover. Mains Connection • For correct mains volt
Resumen del contenido incluido en la página 3
3 3 3 FUNCTIONS OF TV CONTROLS/SOCKETS 1 Mains Power button Switch mains power on or off. 2 Standby light indicator PHILIPS Indicate red light when standby mode is activated. 3 Remote Sensor A Aim remote control handset at remote sensor when operating the TV. 1 2 3 4 Volume +/ – button Adjust sound volume louder/softer. 5 P (Programme) + / – button Select channel in ascending/descending order. Note • You can enter the main menu by pressing both the Volume + / – buttons at the same time.
Resumen del contenido incluido en la página 4
4 4 4 FUNCTIONS OF REMOTE CONTROL 1 SLEEPTIMER Allows you to select a time period after which the set will switch to standby mode automatically. You can set the timer in steps of 15 minutes from OFF mode 1 2 up to a maximum of 120 minutes. 2 A/CH n o r 2 PIP ON/OFF 3 PIP UP PIP DOWN Switch on or PIP (Picture in Picture). 4 p v 3 A/CH (ALTERNATE CHANNEL) 5 132 Alternate between last viewed channel and present channel. 4 56 4 PIP SWAP 789 Interchange channel on main screen and subscreen. SMART
Resumen del contenido incluido en la página 5
5 5 5 FUNCTIONS OF REMOTE CONTROL 16 POWER Switch set off temporarily to standby mode. 16 (The red light indicator lights up when set is on 2 standby mode). To switch on set from standby 17 mode, press and hold button for a few seconds. A/CH n o r 18 PIP UP PIP DOWN 17 PIP POSITION p v 19 Allows you to move the PIP screen to your desired position. 2 20 13 18 PIP FREEZE 21 4 56 Allows you to freeze or resume the PIP screen. 789 19 PIP DOWN SMART SMART Selects a PIP channel in descending order.
Resumen del contenido incluido en la página 6
6 6 ACCESSING THE MAIN MENU 6 The main menu allows you access to the PICTURE, SOUND, FEATURES and INSTALL menus. How to call up the main menu MENU SURF PICTURE SOUND LANGUAGE FEATURES AUTO PROGRAM INSTALL TUNER CHANNEL EDIT FINE TUNE 1. Press the MENU button. 2. The main menu appears on the screen. How to access the menus in the main menu The 4 buttons (CURSOR DOWN, UP, LEFT and RIGHT) allow you to select the desired menu, make adjustments and access the sub
Resumen del contenido incluido en la página 7
AUTOMATIC TUNING OF TV CHANNELS 7 7 7 How to tune in the channels automatically (Auto Store) Press button Result on TV Screen Enter main menu . MENU PICTURE SOUND LANGUAGE 2 FEATURES AUTO PROGRAM INSTALL TUNER Press button repeatedly A/CH n o r CHANNEL EDIT PIP UP PIP DOWN until INSTALL is selected. FINE TUNE p v 132 INSTALL Enter install menu. 4 56 Press button the LANGUAGE ENGLISH 789 AUTO PROGRAM second time to enter SMART SMART TUNER ± ` l
Resumen del contenido incluido en la página 8
EDITING OF CHANNELS 8 8 8 This feature allows you to skip channels which have bad or weak TV signal or channels that you do not watch often. Note : Once a channel is skipped, you cannot have access to it by the CHANNEL + or – button. You can only call up the channel by the DIGIT (0 -9) button. How to edit channels Press button Result on TV Screen MENU Enter main menu PICTURE 2 SOUND LANGUAGE A/CH n o r FEATURES AUTO PROGRAM PIP UP PIP DOWN INSTALL TUNER p v Press button repeated
Resumen del contenido incluido en la página 9
9 9 FINE TUNING OF TV CHANNELS 9 How to do fine tuning This feature allows you to adjust the picture reception in area of weak reception. Press Button Result on TV Screen 132 Select the channel you 8 4 56 789 SMART SMART want to fine-tune. 2 ± ` 0 A/CH n o r PIP UP PIP DOWN p v 132 4 56 789 SMART SMART ± ` 0 Enter main menu. MENU PICTURE SOUND LANGUAGE MENU SURF FEATURES AUTO PROGRAM INSTALL TUNER CHANNEL EDIT Press button repeatedly FINE TUNE until INSTALL is
Resumen del contenido incluido en la página 10
10 10 NAMING OF CHANNELS 10 This feature allows a selection of 50 preset names for all channels. It also allows you to enter a new name or modify an existing name of a channel. How to name channels Press button Result on TV Screen Enter main menu. MENU PICTURE SOUND LANGUAGE FEATURES AUTO PROGRAM 2 INSTALL TUNER Press button repeatedly CHANNEL EDIT A/CH n o r FINE TUNE PIP UP PIP DOWN until INSTALL is selected. p v 132 4 56 INSTALL Enter INSTALL menu 789 AUTO PROGRAM SMART SMAR
Resumen del contenido incluido en la página 11
11 11 PICTURE AND SOUND ADJUSTMENTS 11 The picture and sound menu allows you to make adjustments to the picture and volume level. MENU 1 Press (MENU) button to enter main menu. 2 Use the (CURSOR UP) or (DOWN) buttons to select the PICTURE or SOUND menu and the (CURSOR LEFT) or (RIGHT) buttons to make adjustments or access the sub-menus. 3 Press (OSD) m button to exit all menus from screen. Picture menu item Selection PICTURE
Resumen del contenido incluido en la página 12
12 12 FEATURES (LOCK FEATURE) 12 The FEATURES menu allows you access to the LOCK, MESSAGE, DNR (Dynamic Noise Reduction) and PIP (Picture-in-Picture) features. LOCK feature allows parents to lock channels to prevent their children from watching programes they deem undesirable. How to lock channels Press button Result on TV Screen Enter main menu . MENU PICTURE 2 SOUND FEATURES CHILD LOCK A/CH n o r INSTALL MESSAGE Press button repeatedly PIP UP PIP DOWN DNR p v until FEATURES is PIP sele
Resumen del contenido incluido en la página 13
13 13 13 ...... FEATURES (LOCK FEATURE) How to view locked channels Press button Result on TV Screen 1 2 3 4 5 6 Eenter the current access CHANNEL 8 7 8 9 SMART SMART BLOCKED BY CHILD LOCK 2 ± ` code. 0 – – – – Note : Current access code A/CH n o r PLEASE ENTER ACCESS CODE PIP UP PIP DOWN is 0711. OR SELECT ANOTHER CHANNEL p v 2 13 4 56 789 SMART SMART ± ` 0 If access code is correctly MENU SURF entered, all channels can ALL CHANNELS be viewed until TV is CAN BE VIEWED switched off. UNTIL TV IS
Resumen del contenido incluido en la página 14
...... FEATURES (LOCK FEATURE) 14 14 14 How to unlock channels Press button Result on TV Screen Enter main menu . MENU PICTURE SOUND 2 FEATURES CHILD LOCK INSTALL MESSAGE A/CH n o r DNR PIP UP PIP DOWN Press button repeatedly PIP p v until FEATURES is 132 selected. FEATURES 4 56 Enter FEATURES menu 789 SMART SMART CHILD LOCK BLOCK CHANNEL ± ` 0 MESSAGE SETUP CODE DNR MENU SURF PIP Enter CHILD LOCK menu. FEATURES CHILD LOCK A H CH BLOCK CHANNEL SETUP CODE AV m 4 \ FEATURES Enter the BLOCK
Resumen del contenido incluido en la página 15
FEATURES ( LOCK FEATURE) 15 15 15 How to change current access code Press button Result on TV Screen Enter main menu . PICTURE MENU SOUND 2 FEATURES CHILD LOCK INSTALL MESSAGE A/CH n o r DNR Press button repeatedly PIP UP PIP DOWN PIP p v until FEATURES is 132 selected. 4 56 FEATURES Enter FEATURES menu 789 SMART SMART ± ` CHILD LOCK BLOCK CHANNEL 0 MESSAGE SETUP CODE MENU SURF DNR PIP Enter CHILD LOCK menu. FEATURES CHILD LOCK A H CH BLOCK CHANNEL SETUP CODE AV m 4 \ FEATURES Select SET
Resumen del contenido incluido en la página 16
16 16 FEATURES (MESSAGE FEATURE) 16 Message feature This feature allows you to key in a message. The message will be displayed on the screen when the set is switched on. When the set is on standby mode, the standby light indicator will start flashing indicating there is a message. Note : For message to disappear from screen, press MENU button on the remote control. How to use the message feature Press button Result on TV Screen Enter main menu. MENU PICTURE SOU
Resumen del contenido incluido en la página 17
17 17 17 FEATURES (DYNAMIC NOISE REDUCTION / INCREDIBLE PICTURE) Dynamic Noise Reduction This feature allows you to improve the “noisy” picture (“snow” or little dots on the picture) resulting in a clearer and sharper picture. Press button Result on TV Screen Enter main menu. PICTURE MENU SOUND 2 FEATURES CHILD LOCK INSTALL MESSAGE A/CH n o r DNR PIP UP PIP DOWN PIP p v Press button repeatedly 2 until FEATURES is selected. 13 4 56 789 SMART SMART ± ` 0 MENU SURF FEATURES Enter FEATURES men
Resumen del contenido incluido en la página 18
18 18 FEATURES (PICTURE-IN-PICTURE) 18 Picture In Picture feature allows you to call up a subscreen within your main screen which enable you to watch two channels at the same time. How to start PIP function • Switch on PIP mode. 8 2 (A normal size PIP A/CH n o r screen appears) PIP UP PIP DOWN p v • Press button second 8 time to change normal size PIP screen to a smaller size. • Press button the third time to switch off PIP screen. How to select PIP Source AV3 • Press button repeatedly 2 AV2 to
Resumen del contenido incluido en la página 19
19 19 19 FEATURES (PICTURE-IN-PICTURE) How to position the PIP screen • Press button to move PIP screen 2 to your desired position. A/CH n o r PIP UP PIP DOWN p v 5 How to swap PIP screen with 8 2 the television screen A/CH n o r • Press button to interchange the PIP 8 PIP UP PIP DOWN screen and the television screen p v How to adjust PIP picture settings You can adjust COLOUR and TINT settings through the PIP menu. Press button Result on TV Enter main menu. MENU PICTURE 2 SOUND FEATUR
Resumen del contenido incluido en la página 20
20 20 20 USING THE SURF FEATURE This feature allows you to select up to a maximum of 10 channels and view quickly the selected channels. How to add a channel to the surf list Press button Result on TV Screen 1 1 2 3 SURF 4 5 6 Key in the channel number 8 7 8 9 2 SMART SMART ± 0 ` you want to add to the surf THE SURF LIST A/CH n o r list. IS EMPTY PIP UP PIP DOWN p v SURF Enter the SURF menu. PRESS úúú úú TO ADD 2 13 4 56 SURF 8 789 Add selected channel to the SMART SMART ± ` 0 surf list. Repeat
