Resumen del contenido incluido en la página 1
DC3200
DC3200
DC3200
DC3200 DC3200
DC3200
DC3200
DC3200
DC3200
DC3200
DC3200
DC3200
DC3200
DC3200 DC3200
DC3200
DC3200
DC3200
USER'S MANUAL
Resumen del contenido incluido en la página 2
TABLE OF CONTENTS Electromagnetic Compatibility Notice..................................................................2 Trademarks acknowledgement..........................................................................2 Precautions.........................................................................................................3 Contents of package...........................................................................................4 Batteries used for DC3200 Digital Camera......
Resumen del contenido incluido en la página 3
Electromagnetic Compatibility Notice This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions : (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Warning : Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment
Resumen del contenido incluido en la página 4
Precautions : Thank you for purchasing a DC3200 digital camera. Please read the instructions carefully for a thorough understanding of the product before taking pictures. • This camera is not resistant to water and should not be used outdoors in snow or rain. If accidentally dropped in water, please quickly pour out the water. Dry it with sunlight or an air-blower. • Protect it from excessive humidity. It will wet the lens and the pictures taken will be blurred. • Do not expose the camera to s
Resumen del contenido incluido en la página 5
Contents of Package: DC3200 digital camera Installation CD-ROM containing: User's Manual and Digital Camera software Quick Start Guide USB cable Video cable Hand Strap for camera Warranty Card Nomenclature: Flash Hand Strap Mount LED View Finder Tripod port Lens Power Switch View Finder Mode Dial CF card cover Video out LCD monitor 1.8'' TFT LCD Monitor control buttons USB port Shutter Status LCD Display Resolution Self Timer Flash 4
Resumen del contenido incluido en la página 6
Batteries Installation 1. Insert 4 AA alkaline batteries into the battery compartment 2. Slide the Power switch to the right for 1 second; the camera will be turned on. 3. The camera cannot be powered up without batteries. 4. If the battery power is cut off, the settings will be reset. For example, the date and time will be set to 01/01/00 12:00 5. If the battery is too low, a battery icon on the status LCD screen will blink. Note: Although the camera is ON, the LCD monitor remains OFF to save
Resumen del contenido incluido en la página 7
Input the CF (Compact Flash) Card : 1. Open the CF card cover,located on the left hand side of the camera. 2. Insert the CF card as shown. 3. Lock the ejector. 4. Close the CF card cover. 5. Turn the Mode Dial to Record mode. Power on the camera. 6. The remaining number of photos that can be taken appears on the status LCD. 6 CF ce
Resumen del contenido incluido en la página 8
Take out the CF (Compact Flash) card : 1. Power off the unit. 2. Open the CF Card cover 3. Unlock the ejector. 4. Push down on the ejector to release the CF card. 5. Pull up on the CF card to remove 6. Close the CF card cover. 7 CF ce
Resumen del contenido incluido en la página 9
NOTE: The internal memory only holds six photos when set on the low-resolution setting (HALF*). Use the CF (Compact Flash) card capability for maximum number of photos. The number of photos can be taken by using CF card Resolution CF card size 16MB 32MB 64MB Full *** 15 30 60 Full ** 30 60 120 Full * or Half *** 60 120 240 Half ** 120 240 480 Half * 240 480 960 NOTE: • This is an estimation. The actual figures may vary according to environments and subjects. • With t
Resumen del contenido incluido en la página 10
Buttons Description : 1. RES : Select image resolution from FULL*, FULL* , HALF***, HALF**, HALF*, HALF* , FULL***, FULL**. Resolution: Full = SXGA 1280x1024, Half = VGA 640x480 Image Quality: *** = High, ** = Normal, * = Economy 2. : Timer (10 second delay). Press to select on/off 3. Flash : Toggle between Off ,Auto (no icon), Red Eye , On 4. Shutter : Measure and take exposure. Press to take photos. 5. POWER : Slide to right for 1 second to turn camera ON o
Resumen del contenido incluido en la página 11
LCD Monitor Menu in each Mode: 1. Record Mode Menu Turn Mode Dial to Record mode. Press the Menu button. Use UP and DOWN buttons to select. Use ENTER button to confirm. • LCD Brightness: -5 to +5, step 1 Adjust the LCD monitor brightness to suit the environment's light condition. It is not easy to see the image on LCD monitor, if you use it outdoors in bright sunlight. For indoors, you can use the default value (0). • Quick View: ON or OFF If it is set to On and the
Resumen del contenido incluido en la página 12
NTSC is mostly for USA and Japan. PAL is mostly for Europe. • Slideshow: 1 to 10 seconds Change the display time from 1 second to 10 seconds. The time is preset as 3 seconds. Press ENTER button to stop the Slideshow. • Folder : Select another folder Initially, a folder named "100cnxnt" is created in the folder ‘Dcim’ of the Compact Flash (CF) card. You can also create other folders in the CF card to better organize the photos you have taken. • To create a folder in the C
Resumen del contenido incluido en la página 13
3. SET Setup Mode Menu Turn Mode Dial to Setup mode. Press the Menu button. Use UP and DOWN buttons to select. Use ENTER button to confirm. • Date/Time Set date and time To store the date (month/day/year) and time (hour/minute) on the image, use the UP and DOWN buttons to set the value(s). Press ENTER button to confirm and go to the next entry. Once the minute value is set you will return to the Setup Menu. • Language: English, French, Deutsch, Spanish, Japanese, Portuguese
Resumen del contenido incluido en la página 14
Status LCD display Icon Descriptions 1. Battery icon: Indicates 3 levels of battery power, Full Half Low . Once Low is blinking, replace new batteries or camera will be turned off soon. 2. 4-digit 7-segment display : • Number: In Record mode , Show the total number of images remaining. In Play mode , Show the number of the last image (e.g. 0008, it shows 8). • Busy: Image dat
Resumen del contenido incluido en la página 15
Note: The front LED light will blink red during the 10 second period 5. HALF / FULL: Indicate image resolution. See Buttons Description RES. 6. Rapid Fire: Take 3 continuous photos • To activate Rapid Fire, turn Mode Dial to Record Mode • Press the RES button until Rapid Fire icon appear on the status LCD display. • Press the Shutter button, you can take 3 continuous photos Note: This function is available in resolution FULL* and HALF* only. We recomm
Resumen del contenido incluido en la página 16
• Connect the USB cable from the camera to the PC. • Turn Mode Dial to PC mode • Slide Power switch button to power on the camera • Click 'My Computer' folder you will see an additional removable disk folder. All the images stored in the CF card (or the 500KB internal memory) can be downloaded to the PC hard drive by copying files from this removable disk folder. • Click 'Removable disk' folder • Click ‘Dcim” folder • Open '100cnxnt' folder • The images are stored in the '10
Resumen del contenido incluido en la página 17
Digital Zoom In Record Mode, press the “DISP” button to turn on the LCD monitor and press “ENTER” button to activate the 2X Zoom function . “2 x D Zoom” will be displayed on lower left corner of the LCD monitor. The central portion of the image is enlarged by 2 times. Press Shutter to take photos. Press “ENTER” button again or switch off the power to cancel 2X Zoom function. Note : Once 2X Zoom is activated, the image resolution will automatically be set to VGA, i.e. HALF. This simulates the e
Resumen del contenido incluido en la página 18
Install Camera Drivers and Software Install Arcsoft programs and camera drivers for Windows 98/98SE/Me OS Note: The graphics shown are based on the user interface in Windows 98SE Install Arcsoft Programs 1. Put the program CD-ROM into the CD- ROM drive, it will perform an Auto run. 2. Select your desired language and click OK button 3. Click Next button 4. Click Yes button if you accept the license agreement 5. Change the Destination Folder by clicking the Browse button if necessar
Resumen del contenido incluido en la página 19
6. Select components of Arcsoft programs to install and click Next button 7. Change the name of the program folder if necessary and click Next button 8. Files are being copied to your computer 9. Click Finish button to install camera drivers 18
Resumen del contenido incluido en la página 20
Install camera drivers for Windows 98 / 98SE / Me OS 10. Click Next button to start camera driver installation 11. When installation is complete, click Finish button to restart your computer 12. After the computer is restarted, power up your camera 13. Switch the Mode dial to PC mode 14. Connect the camera and computer with the USB cord 15. Removable disk drive will automatically be installed in your computer. Several screens will appear momentarily. 16. When Removable disk installation i
