Resumen del contenido incluido en la página 1
User Guide for DC2200
0
Resumen del contenido incluido en la página 2
User Guide for DC2200 CONTENTS Introduction 2 Electromagnetic Compatibility Notice 3 Precautions 4 Battery Used for DC2200 Camera 5 Nomenclature 6 Connect the camera unit by USB cable 7 TV Mode 8 Review – Reviewing Pictures 9 Slide Show 10 Info 11 Lang 12 Status LCD display 13 - 18 Recording a movie 19 Host Software 20 Install the Arcsoft programs 21 Install the camera driver 22 Upload photos 23 Use of PhotoFantasy 24 Use of PhotoStudio and PhotoPrinter 25 P
Resumen del contenido incluido en la página 3
User Guide for DC2200 VGA Digital Camera DC2200 VGA Digital Camera DC2200 User Guide User Guide The package contains of below items : DC2200 Camera 1 unit Program CD 1 piece USB cable, 1.5m, transparent 1 piece TV cable, 1.2m, black color 1 piece Hand Strap 1 piece User manual inside CD-ROM Alkaline Batteries (3Ax3) are not included Mode Resolution File Extension File Size VGA 640x480 JPEG ~120KB(Fine),~60KB (Norm) QVGA 320x240 JPEG ~80KB(Econ) 2X(Digital)
Resumen del contenido incluido en la página 4
User Guide for DC2200 Electromagnetic Compatibility Notice This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions : (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Warning : Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipm
Resumen del contenido incluido en la página 5
User Guide for DC2200 Precautions : Thank you for selecting DC2200 dual mode digital camera. Please read the instructions carefully for a thorough understanding before taking pictures. l This camera is not resistant to water and should not be used outdoors in snow or rain. If accidentally dropped in water, please quickly pour out the water. Let it to dry by sunlight or by air-blower. l Protect it from excessive humidity. It will wet the lens and the picture is blur. l Do not attempt to disassemb
Resumen del contenido incluido en la página 6
User Guide for DC2200 Battery Used for DC2200 Camera l To power up the unit, the 3xAAA alkaline batteries should be put in the battery compartment. l Press the Power button. l If the battery power is taken off, the internal memory is erased and the TV settings will be reset to default. • Make sure it is power up by the battery before you connect it to the PC with the USB cable. • When connected to USB, the unit will not go to standby mode. You can take photo or movie with USB cable connected to
Resumen del contenido incluido en la página 7
User Guide for DC2200 Nomenclature : 6
Resumen del contenido incluido en la página 8
User Guide for DC2200 Connect the camera unit by USB cable. 1. First, the PC/Mac is installed with the My Camera driver (install the CD-ROM will put the driver to your PC and double click the Mac driver Installer in the Mac computer will start to install the My Camera driver ). 2. Then power on the camera unit. You can see the status LCD is on. 3. After connecting the USB cable, ‘PC’ is seen on the right corner of the LCD. 4. The My Camera explorer is placed in the My Computer folder. Double cli
Resumen del contenido incluido en la página 9
User Guide for DC2200 TV Mode : Change the camera internal settings You can change some settings of the camera by connecting the video cable to the TV set which has the video input. Power up the unit after connecting the stereo jack of the camera to the RCA jack of TV (this is the Video input socket). Then you can see the main menu on the TV screen. MAIN MENU REVIEW SLIDE SHOW DELETE ALL INFO FORMAT FINE LANG ENGLISH TIMEOUT NONE RESTORE DEFAULTS SAVE
Resumen del contenido incluido en la página 10
User Guide for DC2200 REVIEW – Reviewing Pictures st Press Shutter button to choose the 1 picture to display on TV screen nd Press the Mode button to display the 2 picture. It can continue this step to see all the pictures taken by the camera. st Until the last picture is seen, it will show ‘Done’. Press Mode button again it will go to the 1 picture and continue to review the pictures stored. If press the Shutter button after ‘Done’ is shown, it will escape to the main menu screen. The sequen
Resumen del contenido incluido en la página 11
User Guide for DC2200 SLIDE SHOW – Display stored pictures one by one Press Mode button to choose SLIDE SHOW. Press Shutter button to confirm. st The 1 photo is uploaded to the screen in about 4 seconds. Then it will display the photo for 5s. The next photo is automatically uploaded and repeat the process until all the pictures are displayed. ‘Done’ is displayed in the end of the slide show. Press Shutter button to Main Menu. The sequence is starting from the first image file number. DELETE ALL
Resumen del contenido incluido en la página 12
User Guide for DC2200 INFO – Information of internal memory Press Mode button to choose INFO. Press Shutter button to confirm. You can see the screen as below : the numeric values are just for reference. INFO BATTERY FULL VERSION 5.WT6FXX MEMORY USED 19KB FREE 6108KB SIZE 6131KB |> DONE Press Shutter button to confirm Done. It will go back to main menu. BATTERY FULL means the battery voltage is >3.5V. VERY LOW means the battery voltage is
Resumen del contenido incluido en la página 13
User Guide for DC2200 LANG – Select English, Spanish, Deutch, French or Japanese Press Mode button to choose LANG. It is preset as English. Press Shutter button to confirm change of languages. Press Mode button once, the other language is shown. Press the Shutter button to confirm. Select SAVE to update the language. TIMEOUT (STANDBY) – Select the auto off time Press Mode button to choose TIMEOUT. Press Shutter button to confirm change of timeout. Press Mode button to toggle between 5 differen
Resumen del contenido incluido en la página 14
User Guide for DC2200 Status LCD display Icons in the status LCD : Battery icon : 2 Levels of power input 3-digit 7 segment display : Count Up from 0 to 999. (if over 999, it will show 999) NTSC, PAL : TV system selection Movie icon : Show movie mode. FINE , NORM, ECON : Photo Quality 2X : Zoom function for TV mode. MEM icon : It will blink if the memory is full. Memory blocks : Total 4 blocks to show the approximate memory size left. Flash strobe icon : It is on if auto flash is selected. Ru
Resumen del contenido incluido en la página 15
User Guide for DC2200 Status LCD flow chart : Press Shutter button Press LCD displays full to take a photo. Power/Standby segments. Ready to ‘bSY’ (busy) is button to turn on operate. displayed for several the LCD. seconds. ‘FEA’ Press Mode Press Select button to a. If selected, press Mode button to (feature) is button once change the quality : other setting, it will save the displayed in FINE,NORM,ECON, quality option. the counter . Zoom x2, Movie. b. Or wait for timeout (10s), it will save th
Resumen del contenido incluido en la página 16
User Guide for DC2200 Just put in the batteries, press the Power button once. The LCD displays as below (no CF card is inserted). 2. Take a photo As the unit is turned on, press the shutter and it will take a photo. You can see the film counter is increased from 0 to 1. 3. Change Picture quality If you press the Mode button once, you see FEA, press the Select button once, it changes from Fine to Norm (Normal). 15
Resumen del contenido incluido en la página 17
User Guide for DC2200 Then wait for about 10s, it will go back to operating mode but the picture quality is changed to NORM (Normal). This is similar for changing to Econ, Zoom x2 and Movie modes. 4. Change TV system Press the Mode button two times, it will see the NTSC icon, press the Select button and PAL is found. Wait for 10s, or press Mode button 2 times or press Power button 2 times, it will save the PAL system Checking the TV system : Press Mode button 2 times, you can see PAL is set. 5.
Resumen del contenido incluido en la página 18
User Guide for DC2200 6. Self Timer mode : Press the Select button, you see the Timer icon, press the Shutter button, the Timer icon will blink and a photo is taken after 10s. The beeper is ‘Do,Do..’ and the LED is blinking. 7. Flash strobe mode : Press the Mode button 2 times, the flash icon is blinking. Press the Select button to confirm Auto Flash mode. Press Mode button until the operating mode is seen. The flash icon is on and the strobe will flash if the light intensity is too low. Select
Resumen del contenido incluido en la página 19
User Guide for DC2200 Battery Low Detection When the battery power is detected as Low, the last segment of the battery icon is blinking. Remarks : ZOOM (2X) The photo taken by 2X mode is the middle part of the VGA image size. The resolution is QVGA 320x240. This is used for TV mode. You can see a 2X image on the TV screen. Front LED indication : Blinking Busy or self timer is started (beeper sound ‘do,do’ is heard) On Ready to take a photo or it is taking a movie. Off Memory full or Power off.
Resumen del contenido incluido en la página 20
User Guide for DC2200 Recording a Movie You can select the Movie mode in the Quality selection mode. Press the Mode button once, press the Select button 4 times, you can see the Movie icon on. Press Mode button until you see the film counter. Now the Movie mode is set. Press the shutter and hold, you can hear beep beep sound. Now the movie is being taken and saving to the internal memory. You can stop taking movie at any time before it is automatically stopped. The file size is about 980KB( if i
