Manual de instrucciones de Xerox DC230LP

Resumen del contenido incluido en la página 1

7+('2&80(17&203$1<


®
DC230LP Windows NT 4.0 TCP/IP Quick Install
IP Address
Installation Requirements: >
2. Access the System Administration menus: d) Press []. displays.
(current entry)
To install the DC230LP in a DHCP environment,
a) Press [Online] to take the printer off
exclude the addresses assigned to the
4. IP Address Setup (skip this step if using
Printer Off Line
DC230LP at the DHCP server. line. displays.
RARP):
IP Address =
Before Installation: Main Menu >
a) Press [].

Resumen del contenido incluido en la página 2

7+('2&80(17&203$1<   ® DC230LP Windows NT 4.0 TCP/IP Quick Install RARP = e) Press [Enter]. **SAVED** displays Broadcast Addr > b) Press []. displays. (current entry) * a) Press [] until (current entry) momentarily, followed by displays. Default Gateway > c) Press [] until the required setting . (your entry) Broadcast Addr = RARP = b) Press []. displays. (current entry) displays . (required entry) 7. Enter the Subnet Mask: c) Use the [] or [] key to select the d) Press [En

Resumen del contenido incluido en la página 3

7+('2&80(17&203$1<   ® DC230LP Windows NT 4.0 TCP/IP Quick Install f) Press [Enter]. **SAVED** displays d) Press [] repeatedly to delete the momentarily, followed by 13. At the client, install print drivers and map current entry. Enablement > the printer in the usual manner. Refer to Enabled . ® the CentreWare manual, Getting Started e) Use the [] or [] key to select the with Print and Fax Services, for additional Note: The next menu at this level, Port Setting, first charact

Resumen del contenido incluido en la página 4

7+('2&80(17&203$1<   ® DC230LP Windows NT 4.0 TCP/IP Quick Install ©1998 Xerox Corporation Page 4 of 4 701P98454 Version 1.0, 5-98