Resumen del contenido incluido en la página 1
Digital Camera
Operating Instructions
Model No.DMC-LC20PP
Before use, please read these
instructions completely.
For USA assistance , please call: 1-800-272-7033 or send e-mail to : consumerproducts@panasonic.com
For Canadian assistance, please call: 1-800-561-5505 or visit us at www.panasonic.ca
VQT9904-1
Resumen del contenido incluido en la página 2
Dear Customer, Carefully observe copyright laws. We would like to take this opportunity to Recording of pre-recorded tapes or thank you for purchasing this Panasonic discs or other published or broadcast Digital Camera. Please read these material for purposes other than your Operating Instructions carefully and keep own private use may infringe copyright them handy for future reference. laws. Even for the purpose of private use, recording of certain material may be restricted. In
Resumen del contenido incluido en la página 3
FCC Note: (U.S. only) Trade Name: Panasonic This equipment has been tested and Model No.: DMC-LC20 found to comply with the limits for a Class Responsible party:Matsushita Electric B digital device, pursuant to Part 15 of the Corporation of FCC Rules. These limits are designed to America One provide reasonable protection against Panasonic Way, harmful interference in a residential Secaucus, NJ 07094 installation. This equipment generates, Support Contact:Panasonic uses, and can
Resumen del contenido incluido en la página 4
USB Driver End User License Agreement You (“Licensee”) are granted a license for the Software defined in this End User Soft Agreement (“Agreement”) on condition that you agree to the terms and conditions of this Agreement. If Licensee does not agree to the terms and conditions of this Agreement, promptly return the Software to Matsushita Electric Industrial Co., Ltd (“Matsushita”), its distributors or dealers from which you made the purchase. Article 1 : License Licensee is granted
Resumen del contenido incluido en la página 5
Contents Safety Information for Your Safety ....................................................................................... 2 USB Driver End User License Agreement ................................................................ 4 Preparation Standard Accessories ............................................................................................... 7 Names of the Components ....................................................................................... 8 LCD Mo
Resumen del contenido incluido en la página 6
Playback Playing Back Still Pictures ...................................................................................... 46 9 Image Multi Playback ........................................................................................... 47 Using the Playback Zoom ....................................................................................... 48 Playing Back Motion Images .................................................................................. 49 Editing Deleting
Resumen del contenido incluido en la página 7
Standard Accessories Before using your camera, check the contents. 1 SD Memory Card (8MB) 5 Video Cable VJA1153 RP-SD008B 2 AA Ni-MH (nickel-metal hydride) Battery 6 Strap VFC3886 3 Battery Charger DE-893 7 Metal Plate VHD1110 4 USB Connection Kit USB Connection Cable K1HA05CD0001 CD-ROM VFF0144 7
Resumen del contenido incluido en la página 8
Names of the Components [Front View] 1 Lens 1 2 3 4 5 2 Optical Finder (P26) 3 Flash 4 Flash Sensor (P33) 5 Self-timer Indicator (P34) [Top View] 6 Zoom Lever (P30, P31) 7 Shutter Button (P22) 6 7 8 9 8 Mode Dial (P23) 9 Microphone [Back View] 10 Flash Mode Button (P32) 11 Optical Finder (P26) 12 Status Indicator (P21) 13 Flash/Access Indicator (P16, P21) 14 Single/Burst Mode Button (P45) 15 Power Switch (P17) 16 LCD Monitor (P10) 17 DISPLAY Button (P20) 18 MENU Button (P24) 10 11 12
Resumen del contenido incluido en la página 9
[Left Side View] 23 Strap Eyelet (P18) 24 V.OUT (Video Output) Socket 23 (P64) V.OUT 25 DC IN Socket 24 DC IN 26 USB Socket (P66) 25 USB 26 [Bottom View] 27 Battery Door (P12) 28 Memory Card Door (P12) 29 Tripod Receptacle (P19) 27 28 29 9
Resumen del contenido incluido en la página 10
LCD Monitor Display The LCD monitor indicates the operation status. 1 2 34 5 6 7 19 20 21 22 18 9 17 10 16 12 15 23 14 13 24 [In recording] [In playback] 1 REC mode (P23) 19 Playback mode (P46) 20 DPOF setting (P52) 2 Flash mode (P32) 21 Protected image (P55) 3 White balance (P39) 22 Folder/File number (P63) 4 Audio REC 23 REC data 5 Picture size (P35) 24 Recorded time/date 6 Quality (data compression ratio) (P36) 7 Battery indicator (P14) 8 Recordable number/time When recordable nu
Resumen del contenido incluido en la página 11
SET MENU DISPLAY REVIEW DIIGITAL CAMERA T OFF ON Quick Guide Prepare following items. Camera Batteries 2 Memory Card Check that the power switch is set to [OFF]. 1 Charge batteries with the charger. (P13) 2 Open the memory card door. 3 3 Slide the battery door and open it. 4 Insert batteries into the camera. (P12) 5 Insert the memory card into the camera. (P15) A: Connection terminal on the back 4,5 side of the card 6 Set the power switch to [ON]. (P17) 7 Set the mode dial
Resumen del contenido incluido en la página 12
Inserting the Battery [Preparation] Set the power switch to [OFF]. 1 Open the memory card door. 1 2 Slide the battery door and open it. Be sure to open the memory card door. 3 Insert batteries. Insert batteries observing the direction of the + and - polarities. 2 4 Close the battery door and the memory card door and close them until they will clicks. If you do not use the camera for a long time, remove batteries. (When you insert 3 batteries again, set the date) When y
Resumen del contenido incluido en la página 13
Charging the Battery 1 Insert batteries into the charger. 2 Insert the charger into the electrical outlet. The charge lamp A lights and charge starts. 3 Charge is completed when the charge lamp is no longer illuminated. ª Environment/charge error Charge in a place with a surrounding temperature of 32 - 104 F (0 - 40 oC) (also temperature of the battery). When charging starts, the charge lamp lights. If after charging starts the charge lamp blinks, it indicates a charge e
Resumen del contenido incluido en la página 14
ª Battery indicator The remaining battery power is displayed on the LCD monitor. (approximation) : The battery power is sufficient : The remaining power is low : Replace or recharge the battery (Beep sounds): The battery is empty ª Available recording time Taking pictures every 30 seconds using flash light for every other pictures. When the supplied 8 MB SD Memory Card is used Supplied Approx. Approx. 50 min. Approx. 120 min. (equal to 100 still pictures) (equal to 240 still pict
Resumen del contenido incluido en la página 15
Inserting the Card [Preparation] Set the power switch to [OFF]. 1 Open the memory card door. 1 2 Insert the card all the way in until it clicks. Check the direction of the card. 3 Close the memory card door until it clicks. [Removing the card] 2 1 Press the card. 2 Pull the card out. Please be sure to switch off the camera before inserting or removing the card. 3 Do not touch the connection terminal 1 on the back side of the card. If the memory card door could not be cl
Resumen del contenido incluido en la página 16
ª Access to the card ª SD Memory Card (supplied) and MultiMediaCard (optional) The SD Memory Card and MultiMediaCard are small, lightweight, removable external cards. The SD Memory Card is equipped with a write protection switch that can inhibit writing and formatting. SD Memory Card RP-SDH512 (512MB) When you access the card, the red RP-SDH256 (256MB) RP-SD128 (128MB) flash/access indicator 1 lights. RP-SD064B (64MB) RP-SD032B (32MB) When the flash/access indicator
Resumen del contenido incluido en la página 17
Turning Power on/off 1 Slide the power switch and set to [ON]. 1,2 The status indicator lights. 2 Set the power switch to [OFF]. When switching the power on/off, do not put any obstacle in front of the lens. 17
Resumen del contenido incluido en la página 18
Attaching the Strap 1 Remove the triangular metal piece from the strap. 2 Open with the metal plate and attach it to the eyelet 1 of the camera. 3 Attach the strap. 4 Attach the strap to the other side of the camera in the same way. 18
Resumen del contenido incluido en la página 19
Using the Tripod When using a tripod, you can take pictures in slow shutter speed or zoom in tele position. 1 Attach the camera holder 2 to make it match with the tripod receptacle 1 of the camera. 1 2 Install the camera holder into the tripod. 2 Read carefully the tripod operating instructions. You cannot remove the battery or card. 19
Resumen del contenido incluido en la página 20
Using the LCD Monitor Every time you press the [DISPLAY] button, the display of the LCD monitor changes as shown below. DISPLAY When setting the digital zoom to [ON], the display of the LCD monitor can not be set to [OFF]. [In recording] [In playback] When setting the auto review to [ON], it is available, even if the display of the LCD monitor is set to [OFF]. (After finishing the auto review, the display is returned to [OFF]) After recording, if you press the [REVIEW/SET]
